linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: josh@joshtriplett.org
To: Peter Hurley <peter@hurleysoftware.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>,
	Iulia Manda <iulia.manda21@gmail.com>,
	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Linux Memory Management List <linux-mm@kvack.org>,
	LKP <lkp@01.org>,
	linux-kernel@vger.kernel.org
Subject: Re: [CONFIG_MULTIUSER] BUG: unable to handle kernel paging request at ffffffee
Date: Thu, 7 May 2015 08:56:40 -0700	[thread overview]
Message-ID: <20150507155640.GA30083@cloud> (raw)
In-Reply-To: <554AB43A.1030709@hurleysoftware.com>

On Wed, May 06, 2015 at 08:39:22PM -0400, Peter Hurley wrote:
> On 05/06/2015 07:59 PM, josh@joshtriplett.org wrote:
> > On Wed, May 06, 2015 at 08:44:29AM -0700, Josh Triplett wrote:
> >> On Wed, May 06, 2015 at 05:08:50PM +0800, Fengguang Wu wrote:
> >>> FYI, the reported bug is still not fixed in linux-next 20150506.
> >>
> >> This isn't the same bug.  The previous one you mentioned was a userspace
> >> assertion failure in libnih, likely caused because some part of upstart
> >> didn't have appropriate error handling for some syscall returning
> >> ENOSYS; that one wasn't an issue, since CONFIG_MULTIUSER=n is not
> >> expected to boot a standard Linux distribution.
> >>
> >> This one, on the other hand, is a kernel panic, and does need fixing.
> >>
> >>> commit 2813893f8b197a14f1e1ddb04d99bce46817c84a
> >>>
> >>> +-----------------------------------------------------------+------------+------------+------------+
> >>> |                                                           | c79574abe2 | 2813893f8b | cbdacaf0c1 |
> >>> +-----------------------------------------------------------+------------+------------+------------+
> >>> | boot_successes                                            | 60         | 0          | 0          |
> >>> | boot_failures                                             | 0          | 22         | 1064       |
> >>> | BUG:unable_to_handle_kernel                               | 0          | 22         | 1032       |
> >>> | Oops                                                      | 0          | 22         | 1032       |
> >>> | EIP_is_at_devpts_new_index                                | 0          | 22         | 1032       |
> >>> | Kernel_panic-not_syncing:Fatal_exception                  | 0          | 22         | 1032       |
> >>> | backtrace:do_sys_open                                     | 0          | 22         | 1032       |
> >>> | backtrace:SyS_open                                        | 0          | 22         | 1032       |
> >>> | WARNING:at_arch/x86/kernel/fpu/core.c:#fpu__clear()       | 0          | 0          | 32         |
> >>> | Kernel_panic-not_syncing:Attempted_to_kill_init!exitcode= | 0          | 0          | 32         |
> >>> +-----------------------------------------------------------+------------+------------+------------+
> >>
> >> Is this table saying the number of times the type of error in the first
> >> column occurred in each commit?
> >>
> >> In any case, investigating.  Iulia, can you look at this as well?
> >>
> >> I'm digging through the call stack, and I'm having a hard time seeing
> >> how the CONFIG_MULTIUSER patch could affect anything here.
> > 
> > Update: it looks like init_devpts_fs is getting ERR_PTR(-EINVAL) back
> > from kern_mount and storing that in devpts_mnt; later, devpts_new_index
> > pokes at devpts_mnt and explodes.
> > 
> > So, there are two separate bugs here.  On the one hand, CONFIG_MULTIUSER
> > should not be causing kern_mount to fail with -EINVAL; tracking that
> > down now.
> 
> The mount failure is probably from the devpts mount options specifying
> gid= for devpts nodes:
> 
> devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0
> 
> The relevant code is fs/devpts/inode.c:parse_mount_options().
> devpts also supports specifying the uid.
> 
> To me, kern_mount() appropriately fails with -EINVAL, since the mount
> options failed.

Except that init_devpts_fs is called at module_init time, long before
the actual mount syscall; it appears to be creating a kernel-internal
mount, and I don't see how mount options provided by userspace much
later would cause the earlier kern_mount to fail.

Also, I don't see anything in parse_mount_options that should actually
fail with CONFIG_MULTIUSER unset.

> > On the other hand, devpts and ptmx should handle the failure
> > better, without crashing; ptmx_open should have gracefully failed back
> > to userspace with -ENODEV or something, since ptmx doesn't make sense
> > without devpts.  I'll send a patch for that too.
> 
> Yeah, crashing is bad, but I don't think we should even be init'ing
> either BSD or SysV pty drivers if there is no devpts.

Can you review the patch I sent to fix the crash, and see if it looks
reasonable to you?

- Josh Triplett

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2015-05-07 15:56 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20150428004320.GA19623@wfg-t540p.sh.intel.com>
2015-05-02 23:18 ` [CONFIG_MULTIUSER] init: error.c:320: Assertion failed in nih_error_get: CURRENT_CONTEXT->error != NULL Fengguang Wu
2015-05-03  2:21   ` Josh Triplett
2015-05-06  9:08 ` [CONFIG_MULTIUSER] BUG: unable to handle kernel paging request at ffffffee Fengguang Wu
2015-05-06 15:44   ` Josh Triplett
2015-05-06 23:59     ` josh
2015-05-07  0:39       ` Peter Hurley
2015-05-07 15:56         ` josh [this message]
2015-05-07 16:24           ` Peter Hurley
2015-05-07 17:03             ` josh
2015-05-07 17:10               ` josh
2015-05-07  0:59     ` Fengguang Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150507155640.GA30083@cloud \
    --to=josh@joshtriplett.org \
    --cc=akpm@linux-foundation.org \
    --cc=fengguang.wu@intel.com \
    --cc=iulia.manda21@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=lkp@01.org \
    --cc=paulmck@linux.vnet.ibm.com \
    --cc=peter@hurleysoftware.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).