From: Yaowei Bai <bywxiaobai@163.com>
To: Vlastimil Babka <vbabka@suse.cz>
Cc: akpm@linux-foundation.org, mgorman@suse.de, mhocko@kernel.org,
js1304@gmail.com, hannes@cmpxchg.org,
alexander.h.duyck@redhat.com, sasha.levin@oracle.com,
linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] mm/page_alloc: add a helper function to check page before alloc/free
Date: Wed, 9 Sep 2015 22:41:42 +0800 [thread overview]
Message-ID: <20150909144142.GA4934@bbox> (raw)
In-Reply-To: <55F036AA.9040508@suse.cz>
On Wed, Sep 09, 2015 at 03:39:54PM +0200, Vlastimil Babka wrote:
> On 09/08/2015 09:19 PM, Vlastimil Babka wrote:
> >bloat-o-meter looks favorably with my gcc, although there shouldn't be a real
> >reason for it, as the inlining didn't change:
> >
> >add/remove: 1/1 grow/shrink: 1/1 up/down: 285/-336 (-51)
> >function old new delta
> >bad_page - 276 +276
> >get_page_from_freelist 2521 2530 +9
> >free_pages_prepare 745 667 -78
> >bad_page.part 258 - -258
> >
> >With that,
> >
> >Acked-by: Vlastimil Babka <vbabka@suse.cz>
>
> BTW, why do we do all these checks in non-DEBUG_VM builds? Are they
> so often hit nowadays? Shouldn't we check just for hwpoison in the
> non-debug case?
I personly think these checks are still needed in non-debug scenario so
we can still catch the bad page caused by a bug or other things in that
case.
>
> Alternatively, I've considered creating a fast inline pre-check that
> calls a non-inline check-with-report:
>
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index 0c9c82a..cff92f8 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -707,7 +707,20 @@ static inline void __free_one_page(struct page *page,
> zone->free_area[order].nr_free++;
> }
>
> -static inline int check_one_page(struct page *page, unsigned long
> bad_flags)
> +static inline int check_one_page_fast(struct page *page, unsigned long
> + bad_flags)
> +{
> + return (page_mapcount(page)
> + || page->mapping != NULL
> + || atomic_read(&page->_count) != 0
> + || page->flags & bad_flags
> +#ifdef CONFIG_MEMCG
> + || page->mem_cgroup
> +#endif
> + );
> +}
> +
> +static noinline int check_one_page(struct page *page, unsigned long
> bad_flags)
> {
> const char *bad_reason = NULL;
>
> @@ -743,9 +756,12 @@ static inline int free_pages_check(struct page *page)
> {
> int ret = 0;
>
> - ret = check_one_page(page, PAGE_FLAGS_CHECK_AT_FREE);
> - if (ret)
> - return ret;
> + ret = check_one_page_fast(page, PAGE_FLAGS_CHECK_AT_FREE);
> + if (ret) {
> + ret = check_one_page(page, PAGE_FLAGS_CHECK_AT_FREE);
> + if (ret)
> + return ret;
> + }
>
> page_cpupid_reset_last(page);
> if (page->flags & PAGE_FLAGS_CHECK_AT_PREP)
> @@ -1304,7 +1320,9 @@ static inline void expand(struct zone *zone,
> struct page *page,
> */
> static inline int check_new_page(struct page *page)
> {
> - return check_one_page(page, PAGE_FLAGS_CHECK_AT_PREP);
> + if (check_one_page_fast(page, PAGE_FLAGS_CHECK_AT_PREP | __PG_HWPOISON))
> + return check_one_page(page, PAGE_FLAGS_CHECK_AT_PREP);
> + return 0;
> }
>
> static int prep_new_page(struct page *page, unsigned int order,
> gfp_t gfp_flags,
>
> ---
This looks good to me.
>
> That shrinks the fast paths nicely:
>
> add/remove: 1/1 grow/shrink: 0/2 up/down: 480/-498 (-18)
> function old new delta
> check_one_page - 480 +480
> get_page_from_freelist 2530 2458 -72
> free_pages_prepare 667 517 -150
> bad_page 276 - -276
>
> On top of that, the number of branches in the fast paths can be
> reduced if we use arithmetic OR to avoid the short-circuit boolean
> evaluation:
>
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index cff92f8..e8b42ba 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -710,12 +710,12 @@ static inline void __free_one_page(struct page *page,
> static inline int check_one_page_fast(struct page *page, unsigned long
> bad_flags)
> {
> - return (page_mapcount(page)
> - || page->mapping != NULL
> - || atomic_read(&page->_count) != 0
> - || page->flags & bad_flags
> + return ((unsigned long) page_mapcount(page)
> + | (unsigned long) page->mapping
> + | (unsigned long) atomic_read(&page->_count)
> + | (page->flags & bad_flags)
> #ifdef CONFIG_MEMCG
> - || page->mem_cgroup
> + | (unsigned long) page->mem_cgroup
> #endif
> );
> }
>
> That further reduces the fast paths, not much in bytes, but
> importantly in branches:
>
> add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-51 (-51)
> function old new delta
> get_page_from_freelist 2458 2443 -15
> free_pages_prepare 517 481 -36
>
> But I can understand it's rather hackish, and maybe some
> architectures won't be happy with the extra unsigned long
> arithmetics. Thoughts?
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
prev parent reply other threads:[~2015-09-09 14:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-08-27 12:51 [PATCH v3] mm/page_alloc: add a helper function to check page before alloc/free Yaowei Bai
2015-09-08 19:19 ` Vlastimil Babka
2015-09-09 13:28 ` Yaowei Bai
2015-09-09 13:39 ` Vlastimil Babka
2015-09-09 14:41 ` Yaowei Bai [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150909144142.GA4934@bbox \
--to=bywxiaobai@163.com \
--cc=akpm@linux-foundation.org \
--cc=alexander.h.duyck@redhat.com \
--cc=hannes@cmpxchg.org \
--cc=js1304@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=mhocko@kernel.org \
--cc=sasha.levin@oracle.com \
--cc=vbabka@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).