linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Dave Hansen <dave@sr71.net>
To: linux-kernel@vger.kernel.org
Cc: x86@kernel.org, linux-mm@kvack.org,
	torvalds@linux-foundation.org, akpm@linux-foundation.org,
	bp@alien8.de, ak@linux.intel.com, mhocko@suse.com,
	dave.hansen@intel.com, Dave Hansen <dave@sr71.net>,
	dave.hansen@linux.intel.com
Subject: [PATCH 2/4] x86, pagetable: ignore A/D bits in pte/pmd/pud_none()
Date: Thu, 07 Jul 2016 17:19:12 -0700	[thread overview]
Message-ID: <20160708001912.5216F89C@viggo.jf.intel.com> (raw)
In-Reply-To: <20160708001909.FB2443E2@viggo.jf.intel.com>


From: Dave Hansen <dave.hansen@linux.intel.com>

The erratum we are fixing here can lead to stray setting of the
A and D bits.  That means that a pte that we cleared might
suddenly have A/D set.  So, stop considering those bits when
determining if a pte is pte_none().  The same goes for the
other pmd_none() and pud_none().  pgd_none() can be skipped
because it is not affected; we do not use PGD entries for
anything other than pagetables on affected configurations.

This adds a tiny amount of overhead to all pte_none() checks.
I doubt we'll be able to measure it anywhere.

Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
---

 b/arch/x86/include/asm/pgtable.h       |   13 ++++++++++---
 b/arch/x86/include/asm/pgtable_types.h |    6 ++++++
 2 files changed, 16 insertions(+), 3 deletions(-)

diff -puN arch/x86/include/asm/pgtable.h~knl-strays-20-mod-pte-none arch/x86/include/asm/pgtable.h
--- a/arch/x86/include/asm/pgtable.h~knl-strays-20-mod-pte-none	2016-07-07 17:17:43.974764976 -0700
+++ b/arch/x86/include/asm/pgtable.h	2016-07-07 17:17:43.980765246 -0700
@@ -480,7 +480,7 @@ pte_t *populate_extra_pte(unsigned long
 
 static inline int pte_none(pte_t pte)
 {
-	return !pte.pte;
+	return !(pte.pte & ~(_PAGE_KNL_ERRATUM_MASK));
 }
 
 #define __HAVE_ARCH_PTE_SAME
@@ -552,7 +552,8 @@ static inline int pmd_none(pmd_t pmd)
 {
 	/* Only check low word on 32-bit platforms, since it might be
 	   out of sync with upper half. */
-	return (unsigned long)native_pmd_val(pmd) == 0;
+	unsigned long val = native_pmd_val(pmd);
+	return (val & ~_PAGE_KNL_ERRATUM_MASK) == 0;
 }
 
 static inline unsigned long pmd_page_vaddr(pmd_t pmd)
@@ -616,7 +617,7 @@ static inline unsigned long pages_to_mb(
 #if CONFIG_PGTABLE_LEVELS > 2
 static inline int pud_none(pud_t pud)
 {
-	return native_pud_val(pud) == 0;
+	return (native_pud_val(pud) & ~(_PAGE_KNL_ERRATUM_MASK)) == 0;
 }
 
 static inline int pud_present(pud_t pud)
@@ -694,6 +695,12 @@ static inline int pgd_bad(pgd_t pgd)
 
 static inline int pgd_none(pgd_t pgd)
 {
+	/*
+	 * There is no need to do a workaround for the KNL stray
+	 * A/D bit erratum here.  PGDs only point to page tables
+	 * except on 32-bit non-PAE which is not supported on
+	 * KNL.
+	 */
 	return !native_pgd_val(pgd);
 }
 #endif	/* CONFIG_PGTABLE_LEVELS > 3 */
diff -puN arch/x86/include/asm/pgtable_types.h~knl-strays-20-mod-pte-none arch/x86/include/asm/pgtable_types.h
--- a/arch/x86/include/asm/pgtable_types.h~knl-strays-20-mod-pte-none	2016-07-07 17:17:43.976765066 -0700
+++ b/arch/x86/include/asm/pgtable_types.h	2016-07-07 17:17:43.980765246 -0700
@@ -70,6 +70,12 @@
 			 _PAGE_PKEY_BIT2 | \
 			 _PAGE_PKEY_BIT3)
 
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+#define _PAGE_KNL_ERRATUM_MASK (_PAGE_DIRTY | _PAGE_ACCESSED)
+#else
+#define _PAGE_KNL_ERRATUM_MASK 0
+#endif
+
 #ifdef CONFIG_KMEMCHECK
 #define _PAGE_HIDDEN	(_AT(pteval_t, 1) << _PAGE_BIT_HIDDEN)
 #else
_

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2016-07-08  0:19 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-08  0:19 [PATCH 0/4] [RFC][v4] Workaround for Xeon Phi PTE A/D bits erratum Dave Hansen
2016-07-08  0:19 ` [PATCH 1/4] x86, swap: move swap offset/type up in PTE to work around erratum Dave Hansen
2016-07-13 15:19   ` Michal Hocko
2016-07-08  0:19 ` Dave Hansen [this message]
2016-07-13 15:21   ` [PATCH 2/4] x86, pagetable: ignore A/D bits in pte/pmd/pud_none() Michal Hocko
2016-07-13 15:47     ` Dave Hansen
2016-07-14  6:13       ` Michal Hocko
2016-07-08  0:19 ` [PATCH 3/4] x86: disallow running with 32-bit PTEs to work around erratum Dave Hansen
2016-07-08  0:19 ` [PATCH 4/4] x86: use pte_none() to test for empty PTE Dave Hansen
2016-07-13 15:18   ` Michal Hocko
2016-07-13 15:23     ` Julia Lawall
2016-07-13 15:49     ` Julia Lawall
2016-07-13 16:28       ` Dave Hansen
2016-07-14 13:47   ` Vlastimil Babka
2016-07-14 14:24     ` Dave Hansen
2016-07-14 14:50       ` David Vrabel
2016-07-13  9:54 ` [PATCH 0/4] [RFC][v4] Workaround for Xeon Phi PTE A/D bits erratum Vlastimil Babka
  -- strict thread matches above, loose matches on Subject: below --
2016-07-01 17:46 Dave Hansen
2016-07-01 17:47 ` [PATCH 2/4] x86, pagetable: ignore A/D bits in pte/pmd/pud_none() Dave Hansen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160708001912.5216F89C@viggo.jf.intel.com \
    --to=dave@sr71.net \
    --cc=ak@linux.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=bp@alien8.de \
    --cc=dave.hansen@intel.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mhocko@suse.com \
    --cc=torvalds@linux-foundation.org \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).