linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Michal Hocko <mhocko@suse.com>
To: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	Greg Thelen <gthelen@google.com>,
	David Rientjes <rientjes@google.com>,
	"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
	Andrea Arcangeli <aarcange@redhat.com>,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
	Dave Hansen <dave.hansen@intel.com>,
	Dan Williams <dan.j.williams@intel.com>, Jan Kara <jack@suse.cz>,
	linux-mm@kvack.org
Subject: Re: [PATCH] mm: make transparent hugepage size public
Date: Wed, 7 Dec 2016 08:50:03 +0100	[thread overview]
Message-ID: <20161207075003.GA17136@dhcp22.suse.cz> (raw)
In-Reply-To: <alpine.LSU.2.11.1612052200290.13021@eggly.anvils>

On Mon 05-12-16 22:05:22, Hugh Dickins wrote:
> Test programs want to know the size of a transparent hugepage.
> While it is commonly the same as the size of a hugetlbfs page
> (shown as Hugepagesize in /proc/meminfo), that is not always so:
> powerpc implements transparent hugepages in a different way from
> hugetlbfs pages, so it's coincidence when their sizes are the same;
> and x86 and others can support more than one hugetlbfs page size.
> 
> Add /sys/kernel/mm/transparent_hugepage/hpage_pmd_size to show the
> THP size in bytes - it's the same for Anonymous and Shmem hugepages.
> Call it hpage_pmd_size (after HPAGE_PMD_SIZE) rather than hpage_size,
> in case some transparent support for pud and pgd pages is added later.

Definitely much better than cluttering /proc/meminfo even more.

> Signed-off-by: Hugh Dickins <hughd@google.com>

Acked-by: Michal Hocko <mhocko@suse.com>

> ---
> 
>  Documentation/vm/transhuge.txt |    5 +++++
>  mm/huge_memory.c               |   10 ++++++++++
>  2 files changed, 15 insertions(+)
> 
> --- 4.9-rc8/Documentation/vm/transhuge.txt	2016-10-02 16:24:33.000000000 -0700
> +++ linux/Documentation/vm/transhuge.txt	2016-12-05 20:55:12.142578631 -0800
> @@ -136,6 +136,11 @@ or enable it back by writing 1:
>  echo 0 >/sys/kernel/mm/transparent_hugepage/use_zero_page
>  echo 1 >/sys/kernel/mm/transparent_hugepage/use_zero_page
>  
> +Some userspace (such as a test program, or an optimized memory allocation
> +library) may want to know the size (in bytes) of a transparent hugepage:
> +
> +cat /sys/kernel/mm/transparent_hugepage/hpage_pmd_size
> +
>  khugepaged will be automatically started when
>  transparent_hugepage/enabled is set to "always" or "madvise, and it'll
>  be automatically shutdown if it's set to "never".
> --- 4.9-rc8/mm/huge_memory.c	2016-12-04 16:42:39.881703357 -0800
> +++ linux/mm/huge_memory.c	2016-12-05 20:58:19.953010005 -0800
> @@ -285,6 +285,15 @@ static ssize_t use_zero_page_store(struc
>  }
>  static struct kobj_attribute use_zero_page_attr =
>  	__ATTR(use_zero_page, 0644, use_zero_page_show, use_zero_page_store);
> +
> +static ssize_t hpage_pmd_size_show(struct kobject *kobj,
> +		struct kobj_attribute *attr, char *buf)
> +{
> +	return sprintf(buf, "%lu\n", HPAGE_PMD_SIZE);
> +}
> +static struct kobj_attribute hpage_pmd_size_attr =
> +	__ATTR_RO(hpage_pmd_size);
> +
>  #ifdef CONFIG_DEBUG_VM
>  static ssize_t debug_cow_show(struct kobject *kobj,
>  				struct kobj_attribute *attr, char *buf)
> @@ -307,6 +316,7 @@ static struct attribute *hugepage_attr[]
>  	&enabled_attr.attr,
>  	&defrag_attr.attr,
>  	&use_zero_page_attr.attr,
> +	&hpage_pmd_size_attr.attr,
>  #if defined(CONFIG_SHMEM) && defined(CONFIG_TRANSPARENT_HUGE_PAGECACHE)
>  	&shmem_enabled_attr.attr,
>  #endif
> 
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org.  For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

-- 
Michal Hocko
SUSE Labs

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2016-12-07  7:50 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-06  6:05 [PATCH] mm: make transparent hugepage size public Hugh Dickins
2016-12-06  9:07 ` Aneesh Kumar K.V
2016-12-06 15:14   ` Dave Hansen
2016-12-06 17:19     ` Kirill A. Shutemov
2016-12-06 19:27       ` Dave Hansen
2016-12-07  4:13         ` Hugh Dickins
2016-12-06 21:37   ` Andrew Morton
2016-12-07  7:50 ` Michal Hocko [this message]
2016-12-07  8:04   ` Vlastimil Babka

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161207075003.GA17136@dhcp22.suse.cz \
    --to=mhocko@suse.com \
    --cc=aarcange@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=dan.j.williams@intel.com \
    --cc=dave.hansen@intel.com \
    --cc=gthelen@google.com \
    --cc=hughd@google.com \
    --cc=jack@suse.cz \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=linux-mm@kvack.org \
    --cc=rientjes@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).