linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Jerome Glisse <jglisse@redhat.com>
To: Balbir Singh <bsingharora@gmail.com>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	John Hubbard <jhubbard@nvidia.com>,
	David Nellans <dnellans@nvidia.com>,
	Balbir Singh <balbirs@au1.ibm.com>,
	Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>,
	"Paul E . McKenney" <paulmck@linux.vnet.ibm.com>,
	Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: Re: [HMM-CDM 5/5] mm/hmm: simplify kconfig and enable HMM and DEVICE_PUBLIC for ppc64
Date: Wed, 14 Jun 2017 22:07:09 -0400	[thread overview]
Message-ID: <20170615020709.GB4666@redhat.com> (raw)
In-Reply-To: <20170615114611.34e8f2a7@firefly.ozlabs.ibm.com>

On Thu, Jun 15, 2017 at 11:46:11AM +1000, Balbir Singh wrote:
> On Wed, 14 Jun 2017 16:11:44 -0400
> Jerome Glisse <jglisse@redhat.com> wrote:
> 
> > This just simplify kconfig and allow HMM and DEVICE_PUBLIC to be
> > selected for ppc64 once ZONE_DEVICE is allowed on ppc64 (different
> > patchset).
> > 
> > Signed-off-by: Jerome Glisse <jglisse@redhat.com>
> > Signed-off-by: John Hubbard <jhubbard@nvidia.com>
> > Cc: Balbir Singh <balbirs@au1.ibm.com>
> > Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
> > Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
> > Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > ---
> >  include/linux/hmm.h |  4 ++--
> >  mm/Kconfig          | 27 ++++++---------------------
> >  mm/hmm.c            |  4 ++--
> >  3 files changed, 10 insertions(+), 25 deletions(-)
> > 
> > diff --git a/include/linux/hmm.h b/include/linux/hmm.h
> > index f6713b2..720d18c 100644
> > --- a/include/linux/hmm.h
> > +++ b/include/linux/hmm.h
> > @@ -327,7 +327,7 @@ int hmm_vma_fault(struct vm_area_struct *vma,
> >  #endif /* IS_ENABLED(CONFIG_HMM_MIRROR) */
> >  
> >  
> > -#if IS_ENABLED(CONFIG_HMM_DEVMEM)
> > +#if IS_ENABLED(CONFIG_DEVICE_PRIVATE) || IS_ENABLED(CONFIG_DEVICE_PUBLIC)
> >  struct hmm_devmem;
> >  
> >  struct page *hmm_vma_alloc_locked_page(struct vm_area_struct *vma,
> > @@ -456,7 +456,7 @@ struct hmm_device {
> >   */
> >  struct hmm_device *hmm_device_new(void *drvdata);
> >  void hmm_device_put(struct hmm_device *hmm_device);
> > -#endif /* IS_ENABLED(CONFIG_HMM_DEVMEM) */
> > +#endif /* CONFIG_DEVICE_PRIVATE || CONFIG_DEVICE_PUBLIC */
> >  
> >  
> >  /* Below are for HMM internal use only! Not to be used by device driver! */
> > diff --git a/mm/Kconfig b/mm/Kconfig
> > index ad082b9..7de939a 100644
> > --- a/mm/Kconfig
> > +++ b/mm/Kconfig
> > @@ -265,7 +265,7 @@ config ARCH_ENABLE_HUGEPAGE_MIGRATION
> >  config ARCH_HAS_HMM
> >  	bool
> >  	default y
> > -	depends on X86_64
> > +	depends on X86_64 || PPC64
> 
> Ideally we want to make this (PPC64 && PPC_BOOK3S)

BOOK3S really ? :)

> 
> >  	depends on ZONE_DEVICE
> >  	depends on MMU && 64BIT
> >  	depends on MEMORY_HOTPLUG
> > @@ -277,7 +277,7 @@ config HMM
> >  
> >  config HMM_MIRROR
> >  	bool "HMM mirror CPU page table into a device page table"
> > -	depends on ARCH_HAS_HMM
> > +	depends on ARCH_HAS_HMM && X86_64
> 
> We would need HMM_MIRROR for the generation of hardware that does
> not have CDM

That would require could change to mirror code mostly ppc is missing
something like pmd_index() iirc. So best to tackle that as separate
patchset.

> 
> >  	select MMU_NOTIFIER
> >  	select HMM
> >  	help
> > @@ -287,15 +287,6 @@ config HMM_MIRROR
> >  	  page tables (at PAGE_SIZE granularity), and must be able to recover from
> >  	  the resulting potential page faults.
> >  
> > -config HMM_DEVMEM
> > -	bool "HMM device memory helpers (to leverage ZONE_DEVICE)"
> > -	depends on ARCH_HAS_HMM
> > -	select HMM
> > -	help
> > -	  HMM devmem is a set of helper routines to leverage the ZONE_DEVICE
> > -	  feature. This is just to avoid having device drivers to replicating a lot
> > -	  of boiler plate code.  See Documentation/vm/hmm.txt.
> > -
> >  config PHYS_ADDR_T_64BIT
> >  	def_bool 64BIT || ARCH_PHYS_ADDR_T_64BIT
> >  
> > @@ -720,11 +711,8 @@ config ZONE_DEVICE
> >  
> >  config DEVICE_PRIVATE
> >  	bool "Unaddressable device memory (GPU memory, ...)"
> > -	depends on X86_64
> > -	depends on ZONE_DEVICE
> > -	depends on MEMORY_HOTPLUG
> > -	depends on MEMORY_HOTREMOVE
> > -	depends on SPARSEMEM_VMEMMAP
> > +	depends on ARCH_HAS_HMM && X86_64
> 
> Same as above
> 
> > +	select HMM
> >  
> >  	help
> >  	  Allows creation of struct pages to represent unaddressable device
> > @@ -733,11 +721,8 @@ config DEVICE_PRIVATE
> >  
> >  config DEVICE_PUBLIC
> >  	bool "Unaddressable device memory (GPU memory, ...)"
> 
> The unaddressable is a typo from above.

Yup cut and paste thank for catching that.

Jerome

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2017-06-15  2:07 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-14 20:11 [HMM-CDM 0/5] Cache coherent device memory (CDM) with HMM Jérôme Glisse
2017-06-14 20:11 ` [HMM-CDM 1/5] mm/device-public-memory: device memory cache coherent with CPU Jérôme Glisse
2017-06-14 20:11 ` [HMM-CDM 2/5] mm/hmm: add new helper to hotplug CDM memory region Jérôme Glisse
2017-06-15  4:28   ` Balbir Singh
2017-06-14 20:11 ` [HMM-CDM 3/5] mm/memcontrol: allow to uncharge page without using page->lru field Jérôme Glisse
2017-06-15  3:31   ` Balbir Singh
2017-06-15 15:35     ` Jerome Glisse
2017-06-14 20:11 ` [HMM-CDM 4/5] mm/memcontrol: support MEMORY_DEVICE_PRIVATE and MEMORY_DEVICE_PUBLIC Jérôme Glisse
2017-06-15  1:41   ` Balbir Singh
2017-06-15  2:04     ` Jerome Glisse
2017-06-15  3:10       ` Balbir Singh
2017-06-14 20:11 ` [HMM-CDM 5/5] mm/hmm: simplify kconfig and enable HMM and DEVICE_PUBLIC for ppc64 Jérôme Glisse
2017-06-14 23:10   ` John Hubbard
2017-06-15  2:09     ` Jerome Glisse
2017-06-15  3:15       ` John Hubbard
2017-06-15  1:46   ` Balbir Singh
2017-06-15  2:07     ` Jerome Glisse [this message]
2017-06-15  2:59       ` Balbir Singh
2017-06-14 21:20 ` [HMM-CDM 0/5] Cache coherent device memory (CDM) with HMM Dave Hansen
2017-06-14 21:38   ` Jerome Glisse
2017-06-14 21:58     ` Dave Hansen
2017-06-14 22:07       ` Benjamin Herrenschmidt
2017-06-14 23:40       ` Balbir Singh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170615020709.GB4666@redhat.com \
    --to=jglisse@redhat.com \
    --cc=aneesh.kumar@linux.vnet.ibm.com \
    --cc=balbirs@au1.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=bsingharora@gmail.com \
    --cc=dnellans@nvidia.com \
    --cc=jhubbard@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=paulmck@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).