From: Balbir Singh <bsingharora@gmail.com>
To: Jerome Glisse <jglisse@redhat.com>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org,
John Hubbard <jhubbard@nvidia.com>,
David Nellans <dnellans@nvidia.com>,
Balbir Singh <balbirs@au1.ibm.com>,
Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>,
"Paul E . McKenney" <paulmck@linux.vnet.ibm.com>,
Benjamin Herrenschmidt <benh@kernel.crashing.org>
Subject: Re: [HMM-CDM 5/5] mm/hmm: simplify kconfig and enable HMM and DEVICE_PUBLIC for ppc64
Date: Thu, 15 Jun 2017 12:59:09 +1000 [thread overview]
Message-ID: <20170615125909.2972e1da@firefly.ozlabs.ibm.com> (raw)
In-Reply-To: <20170615020709.GB4666@redhat.com>
On Wed, 14 Jun 2017 22:07:09 -0400
Jerome Glisse <jglisse@redhat.com> wrote:
> On Thu, Jun 15, 2017 at 11:46:11AM +1000, Balbir Singh wrote:
> > On Wed, 14 Jun 2017 16:11:44 -0400
> > Jérôme Glisse <jglisse@redhat.com> wrote:
> >
> > > This just simplify kconfig and allow HMM and DEVICE_PUBLIC to be
> > > selected for ppc64 once ZONE_DEVICE is allowed on ppc64 (different
> > > patchset).
> > >
> > > Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
> > > Signed-off-by: John Hubbard <jhubbard@nvidia.com>
> > > Cc: Balbir Singh <balbirs@au1.ibm.com>
> > > Cc: Aneesh Kumar <aneesh.kumar@linux.vnet.ibm.com>
> > > Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
> > > Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> > > ---
> > > include/linux/hmm.h | 4 ++--
> > > mm/Kconfig | 27 ++++++---------------------
> > > mm/hmm.c | 4 ++--
> > > 3 files changed, 10 insertions(+), 25 deletions(-)
> > >
> > > diff --git a/include/linux/hmm.h b/include/linux/hmm.h
> > > index f6713b2..720d18c 100644
> > > --- a/include/linux/hmm.h
> > > +++ b/include/linux/hmm.h
> > > @@ -327,7 +327,7 @@ int hmm_vma_fault(struct vm_area_struct *vma,
> > > #endif /* IS_ENABLED(CONFIG_HMM_MIRROR) */
> > >
> > >
> > > -#if IS_ENABLED(CONFIG_HMM_DEVMEM)
> > > +#if IS_ENABLED(CONFIG_DEVICE_PRIVATE) || IS_ENABLED(CONFIG_DEVICE_PUBLIC)
> > > struct hmm_devmem;
> > >
> > > struct page *hmm_vma_alloc_locked_page(struct vm_area_struct *vma,
> > > @@ -456,7 +456,7 @@ struct hmm_device {
> > > */
> > > struct hmm_device *hmm_device_new(void *drvdata);
> > > void hmm_device_put(struct hmm_device *hmm_device);
> > > -#endif /* IS_ENABLED(CONFIG_HMM_DEVMEM) */
> > > +#endif /* CONFIG_DEVICE_PRIVATE || CONFIG_DEVICE_PUBLIC */
> > >
> > >
> > > /* Below are for HMM internal use only! Not to be used by device driver! */
> > > diff --git a/mm/Kconfig b/mm/Kconfig
> > > index ad082b9..7de939a 100644
> > > --- a/mm/Kconfig
> > > +++ b/mm/Kconfig
> > > @@ -265,7 +265,7 @@ config ARCH_ENABLE_HUGEPAGE_MIGRATION
> > > config ARCH_HAS_HMM
> > > bool
> > > default y
> > > - depends on X86_64
> > > + depends on X86_64 || PPC64
> >
> > Ideally we want to make this (PPC64 && PPC_BOOK3S)
>
> BOOK3S really ? :)
Sorry what's wrong with that? I am not sure we want it for BOOK3E 64 bit
Or may be would just make ARCH_HAS_HMM a config set by the ARCH,
like ARCH_HAS_SET_MEMORY
>
> >
> > > depends on ZONE_DEVICE
> > > depends on MMU && 64BIT
> > > depends on MEMORY_HOTPLUG
> > > @@ -277,7 +277,7 @@ config HMM
> > >
> > > config HMM_MIRROR
> > > bool "HMM mirror CPU page table into a device page table"
> > > - depends on ARCH_HAS_HMM
> > > + depends on ARCH_HAS_HMM && X86_64
> >
> > We would need HMM_MIRROR for the generation of hardware that does
> > not have CDM
>
> That would require could change to mirror code mostly ppc is missing
> something like pmd_index() iirc. So best to tackle that as separate
> patchset.
>
We do have pmd_index() and I think Reza's got the whole hmm to compile
on powerpc. I am OK tackling it later. Do you suspect there is a compile time
dependency? I got HMM_MIRROR to compile for me as well
> >
> > > select MMU_NOTIFIER
> > > select HMM
> > > help
> > > @@ -287,15 +287,6 @@ config HMM_MIRROR
> > > page tables (at PAGE_SIZE granularity), and must be able to recover from
> > > the resulting potential page faults.
> > >
> > > -config HMM_DEVMEM
> > > - bool "HMM device memory helpers (to leverage ZONE_DEVICE)"
> > > - depends on ARCH_HAS_HMM
> > > - select HMM
> > > - help
> > > - HMM devmem is a set of helper routines to leverage the ZONE_DEVICE
> > > - feature. This is just to avoid having device drivers to replicating a lot
> > > - of boiler plate code. See Documentation/vm/hmm.txt.
> > > -
> > > config PHYS_ADDR_T_64BIT
> > > def_bool 64BIT || ARCH_PHYS_ADDR_T_64BIT
> > >
> > > @@ -720,11 +711,8 @@ config ZONE_DEVICE
> > >
> > > config DEVICE_PRIVATE
> > > bool "Unaddressable device memory (GPU memory, ...)"
> > > - depends on X86_64
> > > - depends on ZONE_DEVICE
> > > - depends on MEMORY_HOTPLUG
> > > - depends on MEMORY_HOTREMOVE
> > > - depends on SPARSEMEM_VMEMMAP
> > > + depends on ARCH_HAS_HMM && X86_64
> >
> > Same as above
> >
> > > + select HMM
> > >
> > > help
> > > Allows creation of struct pages to represent unaddressable device
> > > @@ -733,11 +721,8 @@ config DEVICE_PRIVATE
> > >
> > > config DEVICE_PUBLIC
> > > bool "Unaddressable device memory (GPU memory, ...)"
> >
> > The unaddressable is a typo from above.
>
> Yup cut and paste thank for catching that.
Your welcome
Balbir Singh.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-06-15 2:59 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-06-14 20:11 [HMM-CDM 0/5] Cache coherent device memory (CDM) with HMM Jérôme Glisse
2017-06-14 20:11 ` [HMM-CDM 1/5] mm/device-public-memory: device memory cache coherent with CPU Jérôme Glisse
2017-06-14 20:11 ` [HMM-CDM 2/5] mm/hmm: add new helper to hotplug CDM memory region Jérôme Glisse
2017-06-15 4:28 ` Balbir Singh
2017-06-14 20:11 ` [HMM-CDM 3/5] mm/memcontrol: allow to uncharge page without using page->lru field Jérôme Glisse
2017-06-15 3:31 ` Balbir Singh
2017-06-15 15:35 ` Jerome Glisse
2017-06-14 20:11 ` [HMM-CDM 4/5] mm/memcontrol: support MEMORY_DEVICE_PRIVATE and MEMORY_DEVICE_PUBLIC Jérôme Glisse
2017-06-15 1:41 ` Balbir Singh
2017-06-15 2:04 ` Jerome Glisse
2017-06-15 3:10 ` Balbir Singh
2017-06-14 20:11 ` [HMM-CDM 5/5] mm/hmm: simplify kconfig and enable HMM and DEVICE_PUBLIC for ppc64 Jérôme Glisse
2017-06-14 23:10 ` John Hubbard
2017-06-15 2:09 ` Jerome Glisse
2017-06-15 3:15 ` John Hubbard
2017-06-15 1:46 ` Balbir Singh
2017-06-15 2:07 ` Jerome Glisse
2017-06-15 2:59 ` Balbir Singh [this message]
2017-06-14 21:20 ` [HMM-CDM 0/5] Cache coherent device memory (CDM) with HMM Dave Hansen
2017-06-14 21:38 ` Jerome Glisse
2017-06-14 21:58 ` Dave Hansen
2017-06-14 22:07 ` Benjamin Herrenschmidt
2017-06-14 23:40 ` Balbir Singh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170615125909.2972e1da@firefly.ozlabs.ibm.com \
--to=bsingharora@gmail.com \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=balbirs@au1.ibm.com \
--cc=benh@kernel.crashing.org \
--cc=dnellans@nvidia.com \
--cc=jglisse@redhat.com \
--cc=jhubbard@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=paulmck@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).