From: "Huang, Ying" <ying.huang@intel.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Huang Ying <ying.huang@intel.com>,
Johannes Weiner <hannes@cmpxchg.org>,
Minchan Kim <minchan@kernel.org>,
Dan Williams <dan.j.williams@intel.com>,
Vishal L Verma <vishal.l.verma@intel.com>,
Jens Axboe <axboe@kernel.dk>,
linux-nvdimm@lists.01.org
Subject: [PATCH -mm -v3 05/12] block, THP: Make block_device_operations.rw_page support THP
Date: Mon, 24 Jul 2017 13:18:33 +0800 [thread overview]
Message-ID: <20170724051840.2309-6-ying.huang@intel.com> (raw)
In-Reply-To: <20170724051840.2309-1-ying.huang@intel.com>
From: Huang Ying <ying.huang@intel.com>
The .rw_page in struct block_device_operations is used by the swap
subsystem to read/write the page contents from/into the corresponding
swap slot in the swap device. To support the THP (Transparent Huge
Page) swap optimization, the .rw_page is enhanced to support to
read/write THP if possible.
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c]
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-nvdimm@lists.01.org
---
drivers/block/brd.c | 6 +++++-
drivers/block/zram/zram_drv.c | 2 ++
drivers/nvdimm/btt.c | 4 +++-
drivers/nvdimm/pmem.c | 41 ++++++++++++++++++++++++++++++-----------
4 files changed, 40 insertions(+), 13 deletions(-)
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 104b71c0490d..5d9ed0616413 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -326,7 +326,11 @@ static int brd_rw_page(struct block_device *bdev, sector_t sector,
struct page *page, bool is_write)
{
struct brd_device *brd = bdev->bd_disk->private_data;
- int err = brd_do_bvec(brd, page, PAGE_SIZE, 0, is_write, sector);
+ int err;
+
+ if (PageTransHuge(page))
+ return -ENOTSUPP;
+ err = brd_do_bvec(brd, page, PAGE_SIZE, 0, is_write, sector);
page_endio(page, is_write, err);
return err;
}
diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index 856d5dc02451..e2a305b41cd4 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -927,6 +927,8 @@ static int zram_rw_page(struct block_device *bdev, sector_t sector,
struct zram *zram;
struct bio_vec bv;
+ if (PageTransHuge(page))
+ return -ENOTSUPP;
zram = bdev->bd_disk->private_data;
if (!valid_io_request(zram, sector, PAGE_SIZE)) {
diff --git a/drivers/nvdimm/btt.c b/drivers/nvdimm/btt.c
index 14323faf8bd9..60491641a8d6 100644
--- a/drivers/nvdimm/btt.c
+++ b/drivers/nvdimm/btt.c
@@ -1241,8 +1241,10 @@ static int btt_rw_page(struct block_device *bdev, sector_t sector,
{
struct btt *btt = bdev->bd_disk->private_data;
int rc;
+ unsigned int len;
- rc = btt_do_bvec(btt, NULL, page, PAGE_SIZE, 0, is_write, sector);
+ len = hpage_nr_pages(page) * PAGE_SIZE;
+ rc = btt_do_bvec(btt, NULL, page, len, 0, is_write, sector);
if (rc == 0)
page_endio(page, is_write, 0);
diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c
index f7099adaabc0..e9aa453da50c 100644
--- a/drivers/nvdimm/pmem.c
+++ b/drivers/nvdimm/pmem.c
@@ -80,22 +80,40 @@ static blk_status_t pmem_clear_poison(struct pmem_device *pmem,
static void write_pmem(void *pmem_addr, struct page *page,
unsigned int off, unsigned int len)
{
- void *mem = kmap_atomic(page);
-
- memcpy_flushcache(pmem_addr, mem + off, len);
- kunmap_atomic(mem);
+ unsigned int chunk;
+ void *mem;
+
+ while (len) {
+ mem = kmap_atomic(page);
+ chunk = min_t(unsigned int, len, PAGE_SIZE);
+ memcpy_flushcache(pmem_addr, mem + off, chunk);
+ kunmap_atomic(mem);
+ len -= chunk;
+ off = 0;
+ page++;
+ pmem_addr += PAGE_SIZE;
+ }
}
static blk_status_t read_pmem(struct page *page, unsigned int off,
void *pmem_addr, unsigned int len)
{
+ unsigned int chunk;
int rc;
- void *mem = kmap_atomic(page);
-
- rc = memcpy_mcsafe(mem + off, pmem_addr, len);
- kunmap_atomic(mem);
- if (rc)
- return BLK_STS_IOERR;
+ void *mem;
+
+ while (len) {
+ mem = kmap_atomic(page);
+ chunk = min_t(unsigned int, len, PAGE_SIZE);
+ rc = memcpy_mcsafe(mem + off, pmem_addr, chunk);
+ kunmap_atomic(mem);
+ if (rc)
+ return BLK_STS_IOERR;
+ len -= chunk;
+ off = 0;
+ page++;
+ pmem_addr += PAGE_SIZE;
+ }
return BLK_STS_OK;
}
@@ -188,7 +206,8 @@ static int pmem_rw_page(struct block_device *bdev, sector_t sector,
struct pmem_device *pmem = bdev->bd_queue->queuedata;
blk_status_t rc;
- rc = pmem_do_bvec(pmem, page, PAGE_SIZE, 0, is_write, sector);
+ rc = pmem_do_bvec(pmem, page, hpage_nr_pages(page) * PAGE_SIZE,
+ 0, is_write, sector);
/*
* The ->rw_page interface is subtle and tricky. The core
--
2.13.2
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-07-24 5:18 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-24 5:18 [PATCH -mm -v3 00/12] mm, THP, swap: Delay splitting THP after swapped out Huang, Ying
2017-07-24 5:18 ` [PATCH -mm -v3 01/12] mm, THP, swap: Support to clear swap cache flag for THP " Huang, Ying
2017-07-25 16:39 ` Rik van Riel
2017-07-24 5:18 ` [PATCH -mm -v3 02/12] mm, THP, swap: Support to reclaim swap space " Huang, Ying
2017-07-25 17:47 ` Rik van Riel
2017-07-24 5:18 ` [PATCH -mm -v3 03/12] mm, THP, swap: Make reuse_swap_page() works " Huang, Ying
2017-07-24 5:18 ` [PATCH -mm -v3 04/12] mm, THP, swap: Don't allocate huge cluster for file backed swap device Huang, Ying
2017-07-24 5:18 ` Huang, Ying [this message]
2017-07-24 5:18 ` [PATCH -mm -v3 06/12] Test code to write THP to swap device as a whole Huang, Ying
2017-07-24 5:18 ` [PATCH -mm -v3 07/12] mm, THP, swap: Support to split THP for THP swapped out Huang, Ying
2017-07-24 5:18 ` [PATCH -mm -v3 08/12] memcg, THP, swap: Support move mem cgroup charge " Huang, Ying
2017-07-24 5:18 ` [PATCH -mm -v3 09/12] memcg, THP, swap: Avoid to duplicated charge THP in swap cache Huang, Ying
2017-07-24 5:18 ` [PATCH -mm -v3 10/12] memcg, THP, swap: Make mem_cgroup_swapout() support THP Huang, Ying
2017-07-24 5:18 ` [PATCH -mm -v3 11/12] mm, THP, swap: Delay splitting THP after swapped out Huang, Ying
2017-07-24 5:18 ` [PATCH -mm -v3 12/12] mm, THP, swap: Add THP swapping out fallback counting Huang, Ying
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170724051840.2309-6-ying.huang@intel.com \
--to=ying.huang@intel.com \
--cc=akpm@linux-foundation.org \
--cc=axboe@kernel.dk \
--cc=dan.j.williams@intel.com \
--cc=hannes@cmpxchg.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux-nvdimm@lists.01.org \
--cc=minchan@kernel.org \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).