From: Nadav Amit <namit@vmware.com>
To: linux-mm@kvack.org
Cc: nadav.amit@gmail.com, mgorman@suse.de, riel@redhat.com,
luto@kernel.org, Minchan Kim <minchan@kernel.org>,
stable@vger.kernel.org, Nadav Amit <namit@vmware.com>
Subject: [PATCH v5 1/3] mm: migrate: prevent racy access to tlb_flush_pending
Date: Mon, 31 Jul 2017 09:43:23 -0700 [thread overview]
Message-ID: <20170731164325.235019-2-namit@vmware.com> (raw)
In-Reply-To: <20170731164325.235019-1-namit@vmware.com>
From: Nadav Amit <nadav.amit@gmail.com>
Setting and clearing mm->tlb_flush_pending can be performed by multiple
threads, since mmap_sem may only be acquired for read in
task_numa_work(). If this happens, tlb_flush_pending might be cleared
while one of the threads still changes PTEs and batches TLB flushes.
This can lead to the same race between migration and
change_protection_range() that led to the introduction of
tlb_flush_pending. The result of this race was data corruption, which
means that this patch also addresses a theoretically possible data
corruption.
An actual data corruption was not observed, yet the race was
was confirmed by adding assertion to check tlb_flush_pending is not set
by two threads, adding artificial latency in change_protection_range()
and using sysctl to reduce kernel.numa_balancing_scan_delay_ms.
Fixes: 20841405940e ("mm: fix TLB flush race between migration, and
change_protection_range")
Cc: Minchan Kim <minchan@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
---
include/linux/mm_types.h | 31 ++++++++++++++++++++++---------
kernel/fork.c | 2 +-
mm/debug.c | 2 +-
mm/mprotect.c | 4 ++--
4 files changed, 26 insertions(+), 13 deletions(-)
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 45cdb27791a3..f5263dd0f1bc 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -493,7 +493,7 @@ struct mm_struct {
* can move process memory needs to flush the TLB when moving a
* PROT_NONE or PROT_NUMA mapped page.
*/
- bool tlb_flush_pending;
+ atomic_t tlb_flush_pending;
#endif
struct uprobes_state uprobes_state;
#ifdef CONFIG_HUGETLB_PAGE
@@ -528,33 +528,46 @@ static inline cpumask_t *mm_cpumask(struct mm_struct *mm)
static inline bool mm_tlb_flush_pending(struct mm_struct *mm)
{
barrier();
- return mm->tlb_flush_pending;
+ return atomic_read(&mm->tlb_flush_pending) > 0;
}
-static inline void set_tlb_flush_pending(struct mm_struct *mm)
+
+static inline void init_tlb_flush_pending(struct mm_struct *mm)
{
- mm->tlb_flush_pending = true;
+ atomic_set(&mm->tlb_flush_pending, 0);
+}
+
+static inline void inc_tlb_flush_pending(struct mm_struct *mm)
+{
+ atomic_inc(&mm->tlb_flush_pending);
/*
- * Guarantee that the tlb_flush_pending store does not leak into the
+ * Guarantee that the tlb_flush_pending increase does not leak into the
* critical section updating the page tables
*/
smp_mb__before_spinlock();
}
+
/* Clearing is done after a TLB flush, which also provides a barrier. */
-static inline void clear_tlb_flush_pending(struct mm_struct *mm)
+static inline void dec_tlb_flush_pending(struct mm_struct *mm)
{
barrier();
- mm->tlb_flush_pending = false;
+ atomic_dec(&mm->tlb_flush_pending);
}
#else
static inline bool mm_tlb_flush_pending(struct mm_struct *mm)
{
return false;
}
-static inline void set_tlb_flush_pending(struct mm_struct *mm)
+
+static inline void init_tlb_flush_pending(struct mm_struct *mm)
{
}
-static inline void clear_tlb_flush_pending(struct mm_struct *mm)
+
+static inline void inc_tlb_flush_pending(struct mm_struct *mm)
+{
+}
+
+static inline void dec_tlb_flush_pending(struct mm_struct *mm)
{
}
#endif
diff --git a/kernel/fork.c b/kernel/fork.c
index e53770d2bf95..840e7a7132e1 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -809,7 +809,7 @@ static struct mm_struct *mm_init(struct mm_struct *mm, struct task_struct *p,
mm_init_aio(mm);
mm_init_owner(mm, p);
mmu_notifier_mm_init(mm);
- clear_tlb_flush_pending(mm);
+ init_tlb_flush_pending(mm);
#if defined(CONFIG_TRANSPARENT_HUGEPAGE) && !USE_SPLIT_PMD_PTLOCKS
mm->pmd_huge_pte = NULL;
#endif
diff --git a/mm/debug.c b/mm/debug.c
index db1cd26d8752..d70103bb4731 100644
--- a/mm/debug.c
+++ b/mm/debug.c
@@ -159,7 +159,7 @@ void dump_mm(const struct mm_struct *mm)
mm->numa_next_scan, mm->numa_scan_offset, mm->numa_scan_seq,
#endif
#if defined(CONFIG_NUMA_BALANCING) || defined(CONFIG_COMPACTION)
- mm->tlb_flush_pending,
+ atomic_read(&mm->tlb_flush_pending),
#endif
mm->def_flags, &mm->def_flags
);
diff --git a/mm/mprotect.c b/mm/mprotect.c
index 8edd0d576254..0c413774c1e3 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -245,7 +245,7 @@ static unsigned long change_protection_range(struct vm_area_struct *vma,
BUG_ON(addr >= end);
pgd = pgd_offset(mm, addr);
flush_cache_range(vma, addr, end);
- set_tlb_flush_pending(mm);
+ inc_tlb_flush_pending(mm);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd))
@@ -257,7 +257,7 @@ static unsigned long change_protection_range(struct vm_area_struct *vma,
/* Only flush the TLB if we actually modified any entries: */
if (pages)
flush_tlb_range(vma, start, end);
- clear_tlb_flush_pending(mm);
+ dec_tlb_flush_pending(mm);
return pages;
}
--
2.11.0
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-07-31 23:53 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-31 16:43 [PATCH v5 0/3] mm: fixes of tlb_flush_pending Nadav Amit
2017-07-31 16:43 ` Nadav Amit [this message]
2017-08-01 6:01 ` [PATCH v5 1/3] mm: migrate: prevent racy access to tlb_flush_pending Minchan Kim
2017-07-31 16:43 ` [PATCH v5 2/3] mm: migrate: fix barriers around tlb_flush_pending Nadav Amit
2017-08-01 11:05 ` Rik van Riel
2017-07-31 16:43 ` [PATCH v5 3/3] Revert "mm: numa: defer TLB flush for THP migration as long as possible" Nadav Amit
2017-08-01 10:06 ` Mel Gorman
2017-08-01 11:05 ` Rik van Riel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170731164325.235019-2-namit@vmware.com \
--to=namit@vmware.com \
--cc=linux-mm@kvack.org \
--cc=luto@kernel.org \
--cc=mgorman@suse.de \
--cc=minchan@kernel.org \
--cc=nadav.amit@gmail.com \
--cc=riel@redhat.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).