From: Michal Hocko <mhocko@kernel.org>
To: Seth Forshee <seth.forshee@canonical.com>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: Re: Memory hotplug regression in 4.13
Date: Fri, 22 Dec 2017 15:49:25 +0100 [thread overview]
Message-ID: <20171222144925.GR4831@dhcp22.suse.cz> (raw)
In-Reply-To: <20171218145320.GO16951@dhcp22.suse.cz>
On Mon 18-12-17 15:53:20, Michal Hocko wrote:
> On Fri 01-12-17 08:23:27, Seth Forshee wrote:
> > On Mon, Sep 25, 2017 at 02:58:25PM +0200, Michal Hocko wrote:
> > > On Thu 21-09-17 00:40:34, Seth Forshee wrote:
> [...]
> > > > It seems I don't have that kernel anymore, but I've got a 4.14-rc1 build
> > > > and the problem still occurs there. It's pointing to the call to
> > > > __builtin_memcpy in memcpy (include/linux/string.h line 340), which we
> > > > get to via wp_page_copy -> cow_user_page -> copy_user_highpage.
> > >
> > > Hmm, this is interesting. That would mean that we have successfully
> > > mapped the destination page but its memory is still not accessible.
> > >
> > > Right now I do not see how the patch you have bisected to could make any
> > > difference because it only postponed the onlining to be independent but
> > > your config simply onlines automatically so there shouldn't be any
> > > semantic change. Maybe there is some sort of off-by-one or something.
> > >
> > > I will try to investigate some more. Do you think it would be possible
> > > to configure kdump on your system and provide me with the vmcore in some
> > > way?
> >
> > Sorry, I got busy with other stuff and this kind of fell off my radar.
> > It came to my attention again recently though.
>
> Apology on my side. This has completely fall of my radar.
>
> > I was looking through the hotplug rework changes, and I noticed that
> > 32-bit x86 previously was using ZONE_HIGHMEM as a default but after the
> > rework it doesn't look like it's possible for memory to be associated
> > with ZONE_HIGHMEM when onlining. So I made the change below against 4.14
> > and am now no longer seeing the oopses.
>
> Thanks a lot for debugging! Do I read the above correctly that the
> current code simply returns ZONE_NORMAL and maps an unrelated pfn into
> this zone and that leads to later blowups? Could you attach the fresh
> boot dmesg output please?
>
> > I'm sure this isn't the correct fix, but I think it does confirm that
> > the problem is that the memory should be associated with ZONE_HIGHMEM
> > but is not.
>
>
> Yes, the fix is not quite right. HIGHMEM is not a _kernel_ memory
> zone. The kernel cannot access that memory directly. It is essentially a
> movable zone from the hotplug API POV. We simply do not have any way to
> tell into which zone we want to online this memory range in.
> Unfortunately both zones _can_ be present. It would require an explicit
> configuration (movable_node and a NUMA hoptlugable nodes running in 32b
> or and movable memory configured explicitly on the kernel command line).
>
> The below patch is not really complete but I would rather start simple.
> Maybe we do not even have to care as most 32b users will never use both
> zones at the same time. I've placed a warning to learn about those.
>
> Does this pass your testing?
Any chances to test this?
> ---
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 262bfd26baf9..18fec18bdb60 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -855,12 +855,29 @@ static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn
> return &pgdat->node_zones[ZONE_NORMAL];
> }
>
> +static struct zone *default_movable_zone_for_pfn(int nid)
> +{
> + /*
> + * Please note that 32b HIGHMEM systems might have 2 movable zones
> + * actually so we have to check for both. This is rather ugly hack
> + * to enforce using Highmem on those systems but we do not have a
> + * good user API to tell into which movable zone we should online.
> + * WARN if we have a movable zone which is not highmem.
> + */
> +#ifdef CONFIG_HIGHMEM
> + WARN_ON_ONCE(!zone_movable_is_highmem());
> + return &NODE_DATA(nid)->node_zones[ZONE_HIGHMEM];
> +#else
> + return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> +#endif
> +}
> +
> static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn,
> unsigned long nr_pages)
> {
> struct zone *kernel_zone = default_kernel_zone_for_pfn(nid, start_pfn,
> nr_pages);
> - struct zone *movable_zone = &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> + struct zone *movable_zone = default_movable_zone_for_pfn(nid);
> bool in_kernel = zone_intersects(kernel_zone, start_pfn, nr_pages);
> bool in_movable = zone_intersects(movable_zone, start_pfn, nr_pages);
>
> @@ -886,7 +903,7 @@ struct zone * zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
> return default_kernel_zone_for_pfn(nid, start_pfn, nr_pages);
>
> if (online_type == MMOP_ONLINE_MOVABLE)
> - return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
> + return default_movable_zone_for_pfn(nid);
>
> return default_zone_for_pfn(nid, start_pfn, nr_pages);
> }
> --
> Michal Hocko
> SUSE Labs
--
Michal Hocko
SUSE Labs
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-12-22 14:49 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-09-19 16:41 Memory hotplug regression in 4.13 Seth Forshee
2017-09-20 9:29 ` Michal Hocko
2017-09-21 5:40 ` Seth Forshee
2017-09-25 12:58 ` Michal Hocko
2017-12-01 14:23 ` Seth Forshee
2017-12-18 14:53 ` Michal Hocko
2017-12-18 17:54 ` Randy Dunlap
2017-12-22 14:49 ` Michal Hocko [this message]
2017-12-22 16:12 ` Seth Forshee
2017-12-22 18:45 ` Seth Forshee
2017-12-29 13:05 ` Michal Hocko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171222144925.GR4831@dhcp22.suse.cz \
--to=mhocko@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=seth.forshee@canonical.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).