From: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
To: Ingo Molnar <mingo@redhat.com>,
x86@kernel.org, Thomas Gleixner <tglx@linutronix.de>,
"H. Peter Anvin" <hpa@zytor.com>,
Tom Lendacky <thomas.lendacky@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>,
Borislav Petkov <bp@suse.de>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Subject: [PATCHv4 3/3] x86/mm/encrypt: Rewrite sme_pgtable_calc()
Date: Wed, 31 Jan 2018 16:54:04 +0300 [thread overview]
Message-ID: <20180131135404.40692-4-kirill.shutemov@linux.intel.com> (raw)
In-Reply-To: <20180131135404.40692-1-kirill.shutemov@linux.intel.com>
sme_pgtable_calc() is unnecessary complex. It can be re-written in a
more stream-lined way.
As a side effect, we would get the code ready to boot-time switching
between paging modes.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
---
arch/x86/mm/mem_encrypt_identity.c | 42 +++++++++++---------------------------
1 file changed, 12 insertions(+), 30 deletions(-)
diff --git a/arch/x86/mm/mem_encrypt_identity.c b/arch/x86/mm/mem_encrypt_identity.c
index 4b6a2e3098c5..b4139c5ab972 100644
--- a/arch/x86/mm/mem_encrypt_identity.c
+++ b/arch/x86/mm/mem_encrypt_identity.c
@@ -231,8 +231,7 @@ static void __init sme_map_range_decrypted_wp(struct sme_populate_pgd_data *ppd)
static unsigned long __init sme_pgtable_calc(unsigned long len)
{
- unsigned long p4d_size, pud_size, pmd_size, pte_size;
- unsigned long total;
+ unsigned long entries = 0, tables = 0;
/*
* Perform a relatively simplistic calculation of the pagetable
@@ -246,42 +245,25 @@ static unsigned long __init sme_pgtable_calc(unsigned long len)
* Incrementing the count for each covers the case where the addresses
* cross entries.
*/
- if (IS_ENABLED(CONFIG_X86_5LEVEL)) {
- p4d_size = (ALIGN(len, PGDIR_SIZE) / PGDIR_SIZE) + 1;
- p4d_size *= sizeof(p4d_t) * PTRS_PER_P4D;
- pud_size = (ALIGN(len, P4D_SIZE) / P4D_SIZE) + 1;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- } else {
- p4d_size = 0;
- pud_size = (ALIGN(len, PGDIR_SIZE) / PGDIR_SIZE) + 1;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- }
- pmd_size = (ALIGN(len, PUD_SIZE) / PUD_SIZE) + 1;
- pmd_size *= sizeof(pmd_t) * PTRS_PER_PMD;
- pte_size = 2 * sizeof(pte_t) * PTRS_PER_PTE;
- total = p4d_size + pud_size + pmd_size + pte_size;
+ /* PGDIR_SIZE is equal to P4D_SIZE on 4-level machine. */
+ if (PTRS_PER_P4D > 1)
+ entries += (DIV_ROUND_UP(len, PGDIR_SIZE) + 1) * sizeof(p4d_t) * PTRS_PER_P4D;
+ entries += (DIV_ROUND_UP(len, P4D_SIZE) + 1) * sizeof(pud_t) * PTRS_PER_PUD;
+ entries += (DIV_ROUND_UP(len, PUD_SIZE) + 1) * sizeof(pmd_t) * PTRS_PER_PMD;
+ entries += 2 * sizeof(pte_t) * PTRS_PER_PTE;
/*
* Now calculate the added pagetable structures needed to populate
* the new pagetables.
*/
- if (IS_ENABLED(CONFIG_X86_5LEVEL)) {
- p4d_size = ALIGN(total, PGDIR_SIZE) / PGDIR_SIZE;
- p4d_size *= sizeof(p4d_t) * PTRS_PER_P4D;
- pud_size = ALIGN(total, P4D_SIZE) / P4D_SIZE;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- } else {
- p4d_size = 0;
- pud_size = ALIGN(total, PGDIR_SIZE) / PGDIR_SIZE;
- pud_size *= sizeof(pud_t) * PTRS_PER_PUD;
- }
- pmd_size = ALIGN(total, PUD_SIZE) / PUD_SIZE;
- pmd_size *= sizeof(pmd_t) * PTRS_PER_PMD;
- total += p4d_size + pud_size + pmd_size;
+ if (PTRS_PER_P4D > 1)
+ tables += DIV_ROUND_UP(entries, PGDIR_SIZE) * sizeof(p4d_t) * PTRS_PER_P4D;
+ tables += DIV_ROUND_UP(entries, P4D_SIZE) * sizeof(pud_t) * PTRS_PER_PUD;
+ tables += DIV_ROUND_UP(entries, PUD_SIZE) * sizeof(pmd_t) * PTRS_PER_PMD;
- return total;
+ return entries + tables;
}
void __init __nostackprotector sme_encrypt_kernel(struct boot_params *bp)
--
2.15.1
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
prev parent reply other threads:[~2018-01-31 13:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-31 13:54 [PATCHv4 0/3] x86/mm/encrypt: Cleanup and switching between paging modes<Paste> Kirill A. Shutemov
2018-01-31 13:54 ` [PATCHv4 1/3] x86/mm/encrypt: Move page table helpers into separate translation unit Kirill A. Shutemov
2018-01-31 13:54 ` [PATCHv4 2/3] x86/mm/encrypt: Rewrite sme_populate_pgd() and sme_populate_pgd_large() Kirill A. Shutemov
2018-01-31 13:54 ` Kirill A. Shutemov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180131135404.40692-4-kirill.shutemov@linux.intel.com \
--to=kirill.shutemov@linux.intel.com \
--cc=bp@suse.de \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mingo@redhat.com \
--cc=tglx@linutronix.de \
--cc=thomas.lendacky@amd.com \
--cc=torvalds@linux-foundation.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).