linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Daniel Jordan <daniel.m.jordan@oracle.com>
To: akpm@linux-foundation.org
Cc: dan.carpenter@oracle.com, andrea.parri@amarulasolutions.com,
	shli@kernel.org, ying.huang@intel.com,
	dave.hansen@linux.intel.com, sfr@canb.auug.org.au,
	osandov@fb.com, tj@kernel.org, ak@linux.intel.com,
	linux-mm@kvack.org, kernel-janitors@vger.kernel.org,
	paulmck@linux.ibm.com, stern@rowland.harvard.edu,
	peterz@infradead.org, will.deacon@arm.com,
	daniel.m.jordan@oracle.com
Subject: [PATCH] mm, swap: bounds check swap_info accesses to avoid NULL derefs
Date: Mon, 14 Jan 2019 19:23:05 -0500	[thread overview]
Message-ID: <20190115002305.15402-1-daniel.m.jordan@oracle.com> (raw)
In-Reply-To: <20190114222529.43zay6r242ipw5jb@ca-dmjordan1.us.oracle.com>

Dan Carpenter reports a potential NULL dereference in
get_swap_page_of_type:

  Smatch complains that the NULL checks on "si" aren't consistent.  This
  seems like a real bug because we have not ensured that the type is
  valid and so "si" can be NULL.

Add the missing check for NULL, taking care to use a read barrier to
ensure CPU1 observes CPU0's updates in the correct order:

        CPU0                           CPU1
        alloc_swap_info()              if (type >= nr_swapfiles)
          swap_info[type] = p              /* handle invalid entry */
          smp_wmb()                    smp_rmb()
          ++nr_swapfiles               p = swap_info[type]

Without smp_rmb, CPU1 might observe CPU0's write to nr_swapfiles before
CPU0's write to swap_info[type] and read NULL from swap_info[type].

Ying Huang noticed that other places don't order these reads properly.
Introduce swap_type_to_swap_info to encourage correct usage.

Use READ_ONCE and WRITE_ONCE to follow the Linux Kernel Memory Model
(see tools/memory-model/Documentation/explanation.txt).

This ordering need not be enforced in places where swap_lock is held
(e.g. si_swapinfo) because swap_lock serializes updates to nr_swapfiles
and the swap_info array.

This is a theoretical problem, no actual reports of it exist.

Fixes: ec8acf20afb8 ("swap: add per-partition lock for swapfile")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrea Parri <andrea.parri@amarulasolutions.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>

---

I'd appreciate it if someone more familiar with memory barriers could
check this over.  Thanks.

Probably no need for stable, this is all theoretical.

Against linux-mmotm tag v5.0-rc1-mmotm-2019-01-09-13-40

 mm/swapfile.c | 43 +++++++++++++++++++++++++++----------------
 1 file changed, 27 insertions(+), 16 deletions(-)

diff --git a/mm/swapfile.c b/mm/swapfile.c
index f0edf7244256..dad52fc67045 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -99,6 +99,15 @@ static atomic_t proc_poll_event = ATOMIC_INIT(0);
 
 atomic_t nr_rotate_swap = ATOMIC_INIT(0);
 
+static struct swap_info_struct *swap_type_to_swap_info(int type)
+{
+	if (type >= READ_ONCE(nr_swapfiles))
+		return NULL;
+
+	smp_rmb();	/* Pairs with smp_wmb in alloc_swap_info. */
+	return READ_ONCE(swap_info[type]);
+}
+
 static inline unsigned char swap_count(unsigned char ent)
 {
 	return ent & ~SWAP_HAS_CACHE;	/* may include COUNT_CONTINUED flag */
@@ -1045,12 +1054,14 @@ int get_swap_pages(int n_goal, swp_entry_t swp_entries[], int entry_size)
 /* The only caller of this function is now suspend routine */
 swp_entry_t get_swap_page_of_type(int type)
 {
-	struct swap_info_struct *si;
+	struct swap_info_struct *si = swap_type_to_swap_info(type);
 	pgoff_t offset;
 
-	si = swap_info[type];
+	if (!si)
+		goto fail;
+
 	spin_lock(&si->lock);
-	if (si && (si->flags & SWP_WRITEOK)) {
+	if (si->flags & SWP_WRITEOK) {
 		atomic_long_dec(&nr_swap_pages);
 		/* This is called for allocating swap entry, not cache */
 		offset = scan_swap_map(si, 1);
@@ -1061,6 +1072,7 @@ swp_entry_t get_swap_page_of_type(int type)
 		atomic_long_inc(&nr_swap_pages);
 	}
 	spin_unlock(&si->lock);
+fail:
 	return (swp_entry_t) {0};
 }
 
@@ -1072,9 +1084,9 @@ static struct swap_info_struct *__swap_info_get(swp_entry_t entry)
 	if (!entry.val)
 		goto out;
 	type = swp_type(entry);
-	if (type >= nr_swapfiles)
+	p = swap_type_to_swap_info(type);
+	if (!p)
 		goto bad_nofile;
-	p = swap_info[type];
 	if (!(p->flags & SWP_USED))
 		goto bad_device;
 	offset = swp_offset(entry);
@@ -1212,9 +1224,9 @@ struct swap_info_struct *get_swap_device(swp_entry_t entry)
 	if (!entry.val)
 		goto out;
 	type = swp_type(entry);
-	if (type >= nr_swapfiles)
+	si = swap_type_to_swap_info(type);
+	if (!si)
 		goto bad_nofile;
-	si = swap_info[type];
 
 	preempt_disable();
 	if (!(si->flags & SWP_VALID))
@@ -1765,10 +1777,9 @@ int swap_type_of(dev_t device, sector_t offset, struct block_device **bdev_p)
 sector_t swapdev_block(int type, pgoff_t offset)
 {
 	struct block_device *bdev;
+	struct swap_info_struct *si = swap_type_to_swap_info(type);
 
-	if ((unsigned int)type >= nr_swapfiles)
-		return 0;
-	if (!(swap_info[type]->flags & SWP_WRITEOK))
+	if (!si || !(si->flags & SWP_WRITEOK))
 		return 0;
 	return map_swap_entry(swp_entry(type, offset), &bdev);
 }
@@ -2799,9 +2810,9 @@ static void *swap_start(struct seq_file *swap, loff_t *pos)
 	if (!l)
 		return SEQ_START_TOKEN;
 
-	for (type = 0; type < nr_swapfiles; type++) {
+	for (type = 0; type < READ_ONCE(nr_swapfiles); type++) {
 		smp_rmb();	/* read nr_swapfiles before swap_info[type] */
-		si = swap_info[type];
+		si = READ_ONCE(swap_info[type]);
 		if (!(si->flags & SWP_USED) || !si->swap_map)
 			continue;
 		if (!--l)
@@ -2821,9 +2832,9 @@ static void *swap_next(struct seq_file *swap, void *v, loff_t *pos)
 	else
 		type = si->type + 1;
 
-	for (; type < nr_swapfiles; type++) {
+	for (; type < READ_ONCE(nr_swapfiles); type++) {
 		smp_rmb();	/* read nr_swapfiles before swap_info[type] */
-		si = swap_info[type];
+		si = READ_ONCE(swap_info[type]);
 		if (!(si->flags & SWP_USED) || !si->swap_map)
 			continue;
 		++*pos;
@@ -2930,14 +2941,14 @@ static struct swap_info_struct *alloc_swap_info(void)
 	}
 	if (type >= nr_swapfiles) {
 		p->type = type;
-		swap_info[type] = p;
+		WRITE_ONCE(swap_info[type], p);
 		/*
 		 * Write swap_info[type] before nr_swapfiles, in case a
 		 * racing procfs swap_start() or swap_next() is reading them.
 		 * (We never shrink nr_swapfiles, we never free this entry.)
 		 */
 		smp_wmb();
-		nr_swapfiles++;
+		WRITE_ONCE(nr_swapfiles, nr_swapfiles + 1);
 	} else {
 		kvfree(p);
 		p = swap_info[type];
-- 
2.20.0

  reply	other threads:[~2019-01-15  0:23 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-11  9:59 [PATCH] mm, swap: Potential NULL dereference in get_swap_page_of_type() Dan Carpenter
2019-01-11 17:41 ` Daniel Jordan
2019-01-11 23:20   ` Andrea Parri
2019-01-14 22:25     ` Daniel Jordan
2019-01-15  0:23       ` Daniel Jordan [this message]
2019-01-15  1:17         ` [PATCH] mm, swap: bounds check swap_info accesses to avoid NULL derefs Andrea Parri
2019-01-30  6:26         ` Andrew Morton
2019-01-31  1:52           ` Daniel Jordan
2019-01-31  2:44             ` [PATCH v2] mm, swap: bounds check swap_info array " Daniel Jordan
2019-01-31  2:48           ` About swapoff race patch (was Re: [PATCH] mm, swap: bounds check swap_info accesses to avoid NULL derefs) Huang, Ying
2019-01-31 20:46             ` Andrew Morton
2019-02-02  7:14               ` Huang, Ying
2019-02-04 21:37               ` Hugh Dickins
2019-02-04 22:26                 ` Matthew Wilcox
2019-02-06  0:14                 ` Huang, Ying
2019-02-06  0:36                   ` Hugh Dickins
2019-02-06  0:58                     ` Huang, Ying
2019-02-08  0:28                 ` Andrea Parri
2019-02-11  1:02                   ` Huang, Ying
2019-01-30  7:28         ` [PATCH] mm, swap: bounds check swap_info accesses to avoid NULL derefs Dan Carpenter
2019-01-31  1:55           ` Daniel Jordan
2019-01-30  9:13         ` Peter Zijlstra
2019-01-31  2:00           ` Daniel Jordan
2019-01-15  0:28       ` [PATCH] mm, swap: Potential NULL dereference in get_swap_page_of_type() Andrea Parri
2019-01-14  2:12   ` Huang, Ying
2019-01-14  2:12     ` Huang, Ying
2019-01-14  8:43   ` Dan Carpenter
2019-01-14 23:40     ` Daniel Jordan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190115002305.15402-1-daniel.m.jordan@oracle.com \
    --to=daniel.m.jordan@oracle.com \
    --cc=ak@linux.intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=andrea.parri@amarulasolutions.com \
    --cc=dan.carpenter@oracle.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=osandov@fb.com \
    --cc=paulmck@linux.ibm.com \
    --cc=peterz@infradead.org \
    --cc=sfr@canb.auug.org.au \
    --cc=shli@kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=tj@kernel.org \
    --cc=will.deacon@arm.com \
    --cc=ying.huang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).