From: Jan Kara <jack@suse.cz>
To: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: akpm@linux-foundation.org,
"Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>,
Jan Kara <jack@suse.cz>,
mpe@ellerman.id.au, Ross Zwisler <zwisler@kernel.org>,
Oliver O'Halloran <oohall@gmail.com>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org
Subject: Re: [PATCH 1/2] fs/dax: deposit pagetable even when installing zero page
Date: Thu, 28 Feb 2019 10:21:01 +0100 [thread overview]
Message-ID: <20190228092101.GA22210@quack2.suse.cz> (raw)
In-Reply-To: <20190228083522.8189-1-aneesh.kumar@linux.ibm.com>
On Thu 28-02-19 14:05:21, Aneesh Kumar K.V wrote:
> Architectures like ppc64 use the deposited page table to store hardware
> page table slot information. Make sure we deposit a page table when
> using zero page at the pmd level for hash.
>
> Without this we hit
>
> Unable to handle kernel paging request for data at address 0x00000000
> Faulting instruction address: 0xc000000000082a74
> Oops: Kernel access of bad area, sig: 11 [#1]
> ....
>
> NIP [c000000000082a74] __hash_page_thp+0x224/0x5b0
> LR [c0000000000829a4] __hash_page_thp+0x154/0x5b0
> Call Trace:
> hash_page_mm+0x43c/0x740
> do_hash_page+0x2c/0x3c
> copy_from_iter_flushcache+0xa4/0x4a0
> pmem_copy_from_iter+0x2c/0x50 [nd_pmem]
> dax_copy_from_iter+0x40/0x70
> dax_iomap_actor+0x134/0x360
> iomap_apply+0xfc/0x1b0
> dax_iomap_rw+0xac/0x130
> ext4_file_write_iter+0x254/0x460 [ext4]
> __vfs_write+0x120/0x1e0
> vfs_write+0xd8/0x220
> SyS_write+0x6c/0x110
> system_call+0x3c/0x130
>
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Thanks for the patch. It looks good to me. You can add:
Reviewed-by: Jan Kara <jack@suse.cz>
> ---
> TODO:
> * Add fixes tag
Probably this is a problem since initial PPC PMEM support, isn't it?
Honza
>
> fs/dax.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/fs/dax.c b/fs/dax.c
> index 6959837cc465..01bfb2ac34f9 100644
> --- a/fs/dax.c
> +++ b/fs/dax.c
> @@ -33,6 +33,7 @@
> #include <linux/sizes.h>
> #include <linux/mmu_notifier.h>
> #include <linux/iomap.h>
> +#include <asm/pgalloc.h>
> #include "internal.h"
>
> #define CREATE_TRACE_POINTS
> @@ -1410,7 +1411,9 @@ static vm_fault_t dax_pmd_load_hole(struct xa_state *xas, struct vm_fault *vmf,
> {
> struct address_space *mapping = vmf->vma->vm_file->f_mapping;
> unsigned long pmd_addr = vmf->address & PMD_MASK;
> + struct vm_area_struct *vma = vmf->vma;
> struct inode *inode = mapping->host;
> + pgtable_t pgtable = NULL;
> struct page *zero_page;
> spinlock_t *ptl;
> pmd_t pmd_entry;
> @@ -1425,12 +1428,22 @@ static vm_fault_t dax_pmd_load_hole(struct xa_state *xas, struct vm_fault *vmf,
> *entry = dax_insert_entry(xas, mapping, vmf, *entry, pfn,
> DAX_PMD | DAX_ZERO_PAGE, false);
>
> + if (arch_needs_pgtable_deposit()) {
> + pgtable = pte_alloc_one(vma->vm_mm);
> + if (!pgtable)
> + return VM_FAULT_OOM;
> + }
> +
> ptl = pmd_lock(vmf->vma->vm_mm, vmf->pmd);
> if (!pmd_none(*(vmf->pmd))) {
> spin_unlock(ptl);
> goto fallback;
> }
>
> + if (pgtable) {
> + pgtable_trans_huge_deposit(vma->vm_mm, vmf->pmd, pgtable);
> + mm_inc_nr_ptes(vma->vm_mm);
> + }
> pmd_entry = mk_pmd(zero_page, vmf->vma->vm_page_prot);
> pmd_entry = pmd_mkhuge(pmd_entry);
> set_pmd_at(vmf->vma->vm_mm, pmd_addr, vmf->pmd, pmd_entry);
> @@ -1439,6 +1452,8 @@ static vm_fault_t dax_pmd_load_hole(struct xa_state *xas, struct vm_fault *vmf,
> return VM_FAULT_NOPAGE;
>
> fallback:
> + if (pgtable)
> + pte_free(vma->vm_mm, pgtable);
> trace_dax_pmd_load_hole_fallback(inode, vmf, zero_page, *entry);
> return VM_FAULT_FALLBACK;
> }
> --
> 2.20.1
>
--
Jan Kara <jack@suse.com>
SUSE Labs, CR
next prev parent reply other threads:[~2019-02-28 9:21 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-28 8:35 [PATCH 1/2] fs/dax: deposit pagetable even when installing zero page Aneesh Kumar K.V
2019-02-28 8:35 ` [PATCH 2/2] mm/dax: Don't enable huge dax mapping by default Aneesh Kumar K.V
2019-02-28 9:40 ` Jan Kara
2019-02-28 12:32 ` Aneesh Kumar K.V
2019-02-28 9:40 ` Oliver
2019-02-28 12:43 ` Aneesh Kumar K.V
2019-02-28 16:45 ` Dan Williams
2019-03-06 9:17 ` Aneesh Kumar K.V
2019-03-06 11:44 ` Michal Suchánek
2019-03-06 12:45 ` Aneesh Kumar K.V
2019-03-06 13:06 ` Kirill A. Shutemov
2019-03-13 16:07 ` Dan Williams
2019-03-19 8:44 ` Kirill A. Shutemov
2019-03-19 15:36 ` Dan Williams
2019-03-13 16:02 ` Dan Williams
2019-03-14 3:45 ` Aneesh Kumar K.V
2019-03-14 4:02 ` Dan Williams
2019-03-20 8:06 ` Aneesh Kumar K.V
2019-03-20 8:09 ` Aneesh Kumar K.V
2019-03-20 15:34 ` Dan Williams
2019-03-20 20:57 ` Dan Williams
2019-03-21 3:08 ` Oliver
2019-03-21 3:12 ` Dan Williams
2019-02-28 9:21 ` Jan Kara [this message]
2019-02-28 12:34 ` [PATCH 1/2] fs/dax: deposit pagetable even when installing zero page Aneesh Kumar K.V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190228092101.GA22210@quack2.suse.cz \
--to=jack@suse.cz \
--cc=akpm@linux-foundation.org \
--cc=aneesh.kumar@linux.ibm.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=oohall@gmail.com \
--cc=zwisler@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).