linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Baoquan He <bhe@redhat.com>
To: js1304@gmail.com
Cc: Andrew Morton <akpm@linux-foundation.org>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	Johannes Weiner <hannes@cmpxchg.org>,
	Michal Hocko <mhocko@kernel.org>,
	Minchan Kim <minchan@kernel.org>,
	Vlastimil Babka <vbabka@suse.cz>,
	Mel Gorman <mgorman@techsingularity.net>,
	kernel-team@lge.com, Ye Xiaolong <xiaolong.ye@intel.com>,
	David Rientjes <rientjes@google.com>,
	Joonsoo Kim <iamjoonsoo.kim@lge.com>
Subject: Re: [PATCH v4 1/2] mm/page_alloc: use ac->high_zoneidx for classzone_idx
Date: Mon, 23 Mar 2020 15:08:14 +0800	[thread overview]
Message-ID: <20200323070814.GE3039@MiWiFi-R3L-srv> (raw)
In-Reply-To: <1584938972-7430-2-git-send-email-iamjoonsoo.kim@lge.com>

On 03/23/20 at 01:49pm, js1304@gmail.com wrote:
> From: Joonsoo Kim <iamjoonsoo.kim@lge.com>
> 
> Currently, we use classzone_idx to calculate lowmem reserve proetection
> for an allocation request. This classzone_idx causes a problem
> on NUMA systems when the lowmem reserve protection exists for some zones
> on a node that do not exist on other nodes.
> 
> Before further explanation, I should first clarify how to compute
> the classzone_idx and the high_zoneidx.
> 
> - ac->high_zoneidx is computed via the arcane gfp_zone(gfp_mask) and
> represents the index of the highest zone the allocation can use
> - classzone_idx was supposed to be the index of the highest zone on
> the local node that the allocation can use, that is actually available
> in the system
> 
> Think about following example. Node 0 has 4 populated zone,
> DMA/DMA32/NORMAL/MOVABLE. Node 1 has 1 populated zone, NORMAL. Some zones,
> such as MOVABLE, doesn't exist on node 1 and this makes following
> difference.
> 
> Assume that there is an allocation request whose gfp_zone(gfp_mask) is
> the zone, MOVABLE. Then, it's high_zoneidx is 3. If this allocation is
> initiated on node 0, it's classzone_idx is 3 since actually
> available/usable zone on local (node 0) is MOVABLE. If this allocation
> is initiated on node 1, it's classzone_idx is 2 since actually
> available/usable zone on local (node 1) is NORMAL.
> 
> You can see that classzone_idx of the allocation request are different
> according to their starting node, even if their high_zoneidx is the same.
> 
> Think more about these two allocation requests. If they are processed
> on local, there is no problem. However, if allocation is initiated
> on node 1 are processed on remote, in this example, at the NORMAL zone
> on node 0, due to memory shortage, problem occurs. Their different
> classzone_idx leads to different lowmem reserve and then different
> min watermark. See the following example.
> 
> root@ubuntu:/sys/devices/system/memory# cat /proc/zoneinfo
> Node 0, zone      DMA
>   per-node stats
> ...
>   pages free     3965
>         min      5
>         low      8
>         high     11
>         spanned  4095
>         present  3998
>         managed  3977
>         protection: (0, 2961, 4928, 5440)
> ...
> Node 0, zone    DMA32
>   pages free     757955
>         min      1129
>         low      1887
>         high     2645
>         spanned  1044480
>         present  782303
>         managed  758116
>         protection: (0, 0, 1967, 2479)
> ...
> Node 0, zone   Normal
>   pages free     459806
>         min      750
>         low      1253
>         high     1756
>         spanned  524288
>         present  524288
>         managed  503620
>         protection: (0, 0, 0, 4096)
> ...
> Node 0, zone  Movable
>   pages free     130759
>         min      195
>         low      326
>         high     457
>         spanned  1966079
>         present  131072
>         managed  131072
>         protection: (0, 0, 0, 0)
> ...
> Node 1, zone      DMA
>   pages free     0
>         min      0
>         low      0
>         high     0
>         spanned  0
>         present  0
>         managed  0
>         protection: (0, 0, 1006, 1006)
> Node 1, zone    DMA32
>   pages free     0
>         min      0
>         low      0
>         high     0
>         spanned  0
>         present  0
>         managed  0
>         protection: (0, 0, 1006, 1006)
> Node 1, zone   Normal
>   per-node stats
> ...
>   pages free     233277
>         min      383
>         low      640
>         high     897
>         spanned  262144
>         present  262144
>         managed  257744
>         protection: (0, 0, 0, 0)
> ...
> Node 1, zone  Movable
>   pages free     0
>         min      0
>         low      0
>         high     0
>         spanned  262144
>         present  0
>         managed  0
>         protection: (0, 0, 0, 0)
> 
> - static min watermark for the NORMAL zone on node 0 is 750.
> - lowmem reserve for the request with classzone idx 3 at the NORMAL
> on node 0 is 4096.
> - lowmem reserve for the request with classzone idx 2 at the NORMAL
> on node 0 is 0.
> 
> So, overall min watermark is:
> allocation initiated on node 0 (classzone_idx 3): 750 + 4096 = 4846
> allocation initiated on node 1 (classzone_idx 2): 750 + 0 = 750
> 
> allocation initiated on node 1 will have some precedence than allocation
> initiated on node 0 because min watermark of the former allocation is
> lower than the other. So, allocation initiated on node 1 could succeed
> on node 0 when allocation initiated on node 0 could not, and, this could
> cause too many numa_miss allocation. Then, performance could be
> downgraded.
> 
> Recently, there was a regression report about this problem on CMA patches
> since CMA memory are placed in ZONE_MOVABLE by those patches. I checked
> that problem is disappeared with this fix that uses high_zoneidx
> for classzone_idx.
> 
> http://lkml.kernel.org/r/20180102063528.GG30397@yexl-desktop
> 
> Using high_zoneidx for classzone_idx is more consistent way than previous
> approach because system's memory layout doesn't affect anything to it.
> With this patch, both classzone_idx on above example will be 3 so will
> have the same min watermark.
> 
> allocation initiated on node 0: 750 + 4096 = 4846
> allocation initiated on node 1: 750 + 4096 = 4846
> 
> One could wonder if there is a side effect that allocation initiated on
> node 1 will use higher bar when allocation is handled on local since
> classzone_idx could be higher than before. It will not happen because
> the zone without managed page doesn't contributes lowmem_reserve at all.
> 
> Reported-by: Ye Xiaolong <xiaolong.ye@intel.com>
> Tested-by: Ye Xiaolong <xiaolong.ye@intel.com>
> Acked-by: Vlastimil Babka <vbabka@suse.cz>
> Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
> ---
>  mm/internal.h | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/mm/internal.h b/mm/internal.h
> index c39c895..aebaa33 100644
> --- a/mm/internal.h
> +++ b/mm/internal.h
> @@ -119,7 +119,7 @@ struct alloc_context {
>  	bool spread_dirty_pages;
>  };
>  
> -#define ac_classzone_idx(ac) zonelist_zone_idx(ac->preferred_zoneref)
> +#define ac_classzone_idx(ac) (ac->high_zoneidx)

Reviewed-by: Baoquan He <bhe@redhat.com>



  reply	other threads:[~2020-03-23  7:08 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-23  4:49 [PATCH v4 0/2] integrate classzone_idx and high_zoneidx js1304
2020-03-23  4:49 ` [PATCH v4 1/2] mm/page_alloc: use ac->high_zoneidx for classzone_idx js1304
2020-03-23  7:08   ` Baoquan He [this message]
2020-03-23  4:49 ` [PATCH v4 2/2] mm/page_alloc: integrate classzone_idx and high_zoneidx js1304
2020-03-23  5:21   ` Baoquan He
2020-03-23  5:40     ` Baoquan He
2020-03-23  5:58       ` Joonsoo Kim
2020-03-23  7:09   ` Baoquan He
2020-03-25 15:20   ` Vlastimil Babka

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200323070814.GE3039@MiWiFi-R3L-srv \
    --to=bhe@redhat.com \
    --cc=akpm@linux-foundation.org \
    --cc=hannes@cmpxchg.org \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=js1304@gmail.com \
    --cc=kernel-team@lge.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@techsingularity.net \
    --cc=mhocko@kernel.org \
    --cc=minchan@kernel.org \
    --cc=rientjes@google.com \
    --cc=vbabka@suse.cz \
    --cc=xiaolong.ye@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).