From: Nicholas Piggin <npiggin@gmail.com>
To: linux-arch@vger.kernel.org
Cc: Nicholas Piggin <npiggin@gmail.com>,
x86@kernel.org,
Mathieu Desnoyers <mathieu.desnoyers@efficios.com>,
Arnd Bergmann <arnd@arndb.de>,
Peter Zijlstra <peterz@infradead.org>,
linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
linux-mm@kvack.org, Anton Blanchard <anton@ozlabs.org>
Subject: [RFC PATCH 3/7] mm: introduce exit_lazy_tlb
Date: Fri, 10 Jul 2020 11:56:42 +1000 [thread overview]
Message-ID: <20200710015646.2020871-4-npiggin@gmail.com> (raw)
In-Reply-To: <20200710015646.2020871-1-npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
fs/exec.c | 5 +++--
include/asm-generic/mmu_context.h | 20 ++++++++++++++++++++
kernel/kthread.c | 1 +
kernel/sched/core.c | 2 ++
4 files changed, 26 insertions(+), 2 deletions(-)
diff --git a/fs/exec.c b/fs/exec.c
index e6e8a9a70327..e2ab71e88293 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -1117,9 +1117,10 @@ static int exec_mmap(struct mm_struct *mm)
setmax_mm_hiwater_rss(&tsk->signal->maxrss, old_mm);
mm_update_next_owner(old_mm);
mmput(old_mm);
- return 0;
+ } else {
+ exit_lazy_tlb(active_mm, tsk);
+ mmdrop(active_mm);
}
- mmdrop(active_mm);
return 0;
}
diff --git a/include/asm-generic/mmu_context.h b/include/asm-generic/mmu_context.h
index 86cea80a50df..3fc4c3879b79 100644
--- a/include/asm-generic/mmu_context.h
+++ b/include/asm-generic/mmu_context.h
@@ -24,6 +24,26 @@ static inline void enter_lazy_tlb(struct mm_struct *mm,
}
#endif
+/*
+ * exit_lazy_tlb - Called after switching away from a lazy TLB mode mm.
+ *
+ * mm: the lazy mm context that was switched away from
+ * tsk: the task that was switched to non-lazy mm
+ *
+ * tsk->mm will not be NULL.
+ *
+ * Note this is not symmetrical to enter_lazy_tlb, this is not
+ * called when tasks switch into the lazy mm, it's called after the
+ * lazy mm becomes non-lazy (either switched to a different mm or the
+ * owner of the mm returns).
+ */
+#ifndef exit_lazy_tlb
+static inline void exit_lazy_tlb(struct mm_struct *mm,
+ struct task_struct *tsk)
+{
+}
+#endif
+
/**
* init_new_context - Initialize context of a new mm_struct.
* @tsk: task struct for the mm
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 132f84a5fde3..e813d92f2eab 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -1253,6 +1253,7 @@ void kthread_use_mm(struct mm_struct *mm)
if (active_mm != mm)
mmdrop(active_mm);
+ exit_lazy_tlb(active_mm, tsk);
to_kthread(tsk)->oldfs = get_fs();
set_fs(USER_DS);
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index ca5db40392d4..debc917bc69b 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -3439,6 +3439,8 @@ context_switch(struct rq *rq, struct task_struct *prev,
switch_mm_irqs_off(prev->active_mm, next->mm, next);
if (!prev->mm) { // from kernel
+ exit_lazy_tlb(prev->active_mm, next);
+
/* will mmdrop() in finish_task_switch(). */
rq->prev_mm = prev->active_mm;
prev->active_mm = NULL;
--
2.23.0
next prev parent reply other threads:[~2020-07-10 1:57 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-10 1:56 [RFC PATCH 0/7] mmu context cleanup, lazy tlb cleanup, Nicholas Piggin
2020-07-10 1:56 ` [RFC PATCH 1/7] asm-generic: add generic MMU versions of mmu context functions Nicholas Piggin
2020-07-10 1:56 ` [RFC PATCH 2/7] arch: use asm-generic mmu context for no-op implementations Nicholas Piggin
2020-07-10 1:56 ` Nicholas Piggin [this message]
2020-07-10 1:56 ` [RFC PATCH 4/7] x86: use exit_lazy_tlb rather than membarrier_mm_sync_core_before_usermode Nicholas Piggin
2020-07-10 9:42 ` Peter Zijlstra
2020-07-10 14:02 ` Mathieu Desnoyers
2020-07-10 17:04 ` Andy Lutomirski
2020-07-13 4:45 ` Nicholas Piggin
2020-07-13 13:47 ` Nicholas Piggin
2020-07-13 14:13 ` Mathieu Desnoyers
2020-07-13 15:48 ` Andy Lutomirski
2020-07-13 16:37 ` Nicholas Piggin
2020-07-16 4:15 ` Nicholas Piggin
2020-07-16 4:42 ` Nicholas Piggin
2020-07-16 15:46 ` Mathieu Desnoyers
2020-07-16 16:03 ` Mathieu Desnoyers
2020-07-16 18:58 ` Mathieu Desnoyers
2020-07-16 21:24 ` Alan Stern
2020-07-17 13:39 ` Mathieu Desnoyers
2020-07-17 14:51 ` Alan Stern
2020-07-17 15:39 ` Mathieu Desnoyers
2020-07-17 16:11 ` Alan Stern
2020-07-17 16:22 ` Mathieu Desnoyers
2020-07-17 17:44 ` Alan Stern
2020-07-17 17:52 ` Mathieu Desnoyers
2020-07-17 0:00 ` Nicholas Piggin
2020-07-16 5:18 ` Andy Lutomirski
2020-07-16 6:06 ` Nicholas Piggin
2020-07-16 8:50 ` Peter Zijlstra
2020-07-16 10:03 ` Nicholas Piggin
2020-07-16 11:00 ` peterz
2020-07-16 15:34 ` Mathieu Desnoyers
2020-07-16 23:26 ` Nicholas Piggin
2020-07-17 13:42 ` Mathieu Desnoyers
2020-07-20 3:03 ` Nicholas Piggin
2020-07-20 16:46 ` Mathieu Desnoyers
2020-07-21 10:04 ` Nicholas Piggin
2020-07-21 13:11 ` Mathieu Desnoyers
2020-07-21 14:30 ` Nicholas Piggin
2020-07-21 15:06 ` peterz
2020-07-21 15:15 ` Mathieu Desnoyers
2020-07-21 15:19 ` Peter Zijlstra
2020-07-21 15:22 ` Mathieu Desnoyers
2020-07-10 1:56 ` [RFC PATCH 5/7] lazy tlb: introduce lazy mm refcount helper functions Nicholas Piggin
2020-07-10 9:48 ` Peter Zijlstra
2020-07-10 1:56 ` [RFC PATCH 6/7] lazy tlb: allow lazy tlb mm switching to be configurable Nicholas Piggin
2020-07-10 1:56 ` [RFC PATCH 7/7] lazy tlb: shoot lazies, a non-refcounting lazy tlb option Nicholas Piggin
2020-07-10 9:35 ` Peter Zijlstra
2020-07-13 4:58 ` Nicholas Piggin
2020-07-13 15:59 ` Andy Lutomirski
2020-07-13 16:48 ` Nicholas Piggin
2020-07-13 18:18 ` Andy Lutomirski
2020-07-14 5:04 ` Nicholas Piggin
2020-07-14 6:31 ` Nicholas Piggin
2020-07-14 12:46 ` Andy Lutomirski
2020-07-14 13:23 ` Peter Zijlstra
2020-07-16 2:26 ` Nicholas Piggin
2020-07-16 2:35 ` Nicholas Piggin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200710015646.2020871-4-npiggin@gmail.com \
--to=npiggin@gmail.com \
--cc=anton@ozlabs.org \
--cc=arnd@arndb.de \
--cc=linux-arch@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mathieu.desnoyers@efficios.com \
--cc=peterz@infradead.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).