From: Andrew Morton <akpm@linux-foundation.org>
To: akpm@linux-foundation.org, david@redhat.com, groug@kaod.org,
linux-mm@kvack.org, mm-commits@vger.kernel.org,
rppt@linux.ibm.com, stable@vger.kernel.org,
torvalds@linux-foundation.org
Subject: [patch 09/15] memblock: make for_each_mem_range() traverse MEMBLOCK_HOTPLUG regions
Date: Fri, 23 Jul 2021 15:50:26 -0700 [thread overview]
Message-ID: <20210723225026.A8uSa0Z-U%akpm@linux-foundation.org> (raw)
In-Reply-To: <20210723154926.c6cda0f262b1990b950a5886@linux-foundation.org>
From: Mike Rapoport <rppt@linux.ibm.com>
Subject: memblock: make for_each_mem_range() traverse MEMBLOCK_HOTPLUG regions
Commit b10d6bca8720 ("arch, drivers: replace for_each_membock() with
for_each_mem_range()") didn't take into account that when there is
movable_node parameter in the kernel command line, for_each_mem_range()
would skip ranges marked with MEMBLOCK_HOTPLUG.
The page table setup code in POWER uses for_each_mem_range() to create the
linear mapping of the physical memory and since the regions marked as
MEMORY_HOTPLUG are skipped, they never make it to the linear map.
A later access to the memory in those ranges will fail:
[ 2.271743] BUG: Unable to handle kernel data access on write at 0xc000000400000000
[ 2.271984] Faulting instruction address: 0xc00000000008a3c0
[ 2.272568] Oops: Kernel access of bad area, sig: 11 [#1]
[ 2.272683] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
[ 2.273063] Modules linked in:
[ 2.273435] CPU: 0 PID: 53 Comm: kworker/u2:0 Not tainted 5.13.0 #7
[ 2.273832] NIP: c00000000008a3c0 LR: c0000000003c1ed8 CTR: 0000000000000040
[ 2.273918] REGS: c000000008a57770 TRAP: 0300 Not tainted (5.13.0)
[ 2.274036] MSR: 8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 84222202 XER: 20040000
[ 2.274454] CFAR: c0000000003c1ed4 DAR: c000000400000000 DSISR: 42000000 IRQMASK: 0
[ 2.274454] GPR00: c0000000003c1ed8 c000000008a57a10 c0000000019da700 c000000400000000
[ 2.274454] GPR04: 0000000000000280 0000000000000180 0000000000000400 0000000000000200
[ 2.274454] GPR08: 0000000000000100 0000000000000080 0000000000000040 0000000000000300
[ 2.274454] GPR12: 0000000000000380 c000000001bc0000 c0000000001660c8 c000000006337e00
[ 2.274454] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 2.274454] GPR20: 0000000040000000 0000000020000000 c000000001a81990 c000000008c30000
[ 2.274454] GPR24: c000000008c20000 c000000001a81998 000fffffffff0000 c000000001a819a0
[ 2.274454] GPR28: c000000001a81908 c00c000001000000 c000000008c40000 c000000008a64680
[ 2.275520] NIP [c00000000008a3c0] clear_user_page+0x50/0x80
[ 2.276333] LR [c0000000003c1ed8] __handle_mm_fault+0xc88/0x1910
[ 2.276688] Call Trace:
[ 2.276839] [c000000008a57a10] [c0000000003c1e94] __handle_mm_fault+0xc44/0x1910 (unreliable)
[ 2.277142] [c000000008a57af0] [c0000000003c2c90] handle_mm_fault+0x130/0x2a0
[ 2.277331] [c000000008a57b40] [c0000000003b5f08] __get_user_pages+0x248/0x610
[ 2.277541] [c000000008a57c40] [c0000000003b848c] __get_user_pages_remote+0x12c/0x3e0
[ 2.277768] [c000000008a57cd0] [c000000000473f24] get_arg_page+0x54/0xf0
[ 2.277959] [c000000008a57d10] [c000000000474a7c] copy_string_kernel+0x11c/0x210
[ 2.278159] [c000000008a57d80] [c00000000047663c] kernel_execve+0x16c/0x220
[ 2.278361] [c000000008a57dd0] [c000000000166270] call_usermodehelper_exec_async+0x1b0/0x2f0
[ 2.278543] [c000000008a57e10] [c00000000000d5ec] ret_from_kernel_thread+0x5c/0x70
[ 2.278870] Instruction dump:
[ 2.279214] 79280fa4 79271764 79261f24 794ae8e2 7ca94214 7d683a14 7c893a14 7d893050
[ 2.279416] 7d4903a6 60000000 60000000 60000000 <7c001fec> 7c091fec 7c081fec 7c051fec
[ 2.280193] ---[ end trace 490b8c67e6075e09 ]---
Making for_each_mem_range() include MEMBLOCK_HOTPLUG regions in the
traversal fixes this issue.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1976100
Link: https://lkml.kernel.org/r/20210712071132.20902-1-rppt@kernel.org
Fixes: b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Greg Kurz <groug@kaod.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
include/linux/memblock.h | 4 ++--
mm/memblock.c | 3 ++-
2 files changed, 4 insertions(+), 3 deletions(-)
--- a/include/linux/memblock.h~memblock-make-for_each_mem_range-traverse-memblock_hotplug-regions
+++ a/include/linux/memblock.h
@@ -209,7 +209,7 @@ static inline void __next_physmem_range(
*/
#define for_each_mem_range(i, p_start, p_end) \
__for_each_mem_range(i, &memblock.memory, NULL, NUMA_NO_NODE, \
- MEMBLOCK_NONE, p_start, p_end, NULL)
+ MEMBLOCK_HOTPLUG, p_start, p_end, NULL)
/**
* for_each_mem_range_rev - reverse iterate through memblock areas from
@@ -220,7 +220,7 @@ static inline void __next_physmem_range(
*/
#define for_each_mem_range_rev(i, p_start, p_end) \
__for_each_mem_range_rev(i, &memblock.memory, NULL, NUMA_NO_NODE, \
- MEMBLOCK_NONE, p_start, p_end, NULL)
+ MEMBLOCK_HOTPLUG, p_start, p_end, NULL)
/**
* for_each_reserved_mem_range - iterate over all reserved memblock areas
--- a/mm/memblock.c~memblock-make-for_each_mem_range-traverse-memblock_hotplug-regions
+++ a/mm/memblock.c
@@ -947,7 +947,8 @@ static bool should_skip_region(struct me
return true;
/* skip hotpluggable memory regions if needed */
- if (movable_node_is_enabled() && memblock_is_hotpluggable(m))
+ if (movable_node_is_enabled() && memblock_is_hotpluggable(m) &&
+ !(flags & MEMBLOCK_HOTPLUG))
return true;
/* if we want mirror memory skip non-mirror memory regions */
_
next prev parent reply other threads:[~2021-07-23 22:50 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-23 22:49 incoming Andrew Morton
2021-07-23 22:50 ` [patch 01/15] userfaultfd: do not untag user pointers Andrew Morton
2021-07-23 22:50 ` [patch 02/15] selftest: use mmap instead of posix_memalign to allocate memory Andrew Morton
2021-07-23 22:50 ` [patch 03/15] kfence: defer kfence_test_init to ensure that kunit debugfs is created Andrew Morton
2021-07-23 22:50 ` [patch 04/15] kfence: move the size check to the beginning of __kfence_alloc() Andrew Morton
2021-07-23 22:50 ` [patch 05/15] kfence: skip all GFP_ZONEMASK allocations Andrew Morton
2021-07-23 22:50 ` [patch 06/15] mm: call flush_dcache_page() in memcpy_to_page() and memzero_page() Andrew Morton
2021-07-24 6:59 ` Christoph Hellwig
2021-07-24 16:23 ` Matthew Wilcox
2021-07-23 22:50 ` [patch 07/15] mm: use kmap_local_page in memzero_page Andrew Morton
2021-07-23 22:50 ` [patch 08/15] mm: page_alloc: fix page_poison=1 / INIT_ON_ALLOC_DEFAULT_ON interaction Andrew Morton
2021-07-23 22:50 ` Andrew Morton [this message]
2021-07-23 22:50 ` [patch 10/15] writeback, cgroup: remove wb from offline list before releasing refcnt Andrew Morton
2021-07-23 22:50 ` [patch 11/15] writeback, cgroup: do not reparent dax inodes Andrew Morton
2021-07-23 22:50 ` [patch 12/15] mm/secretmem: wire up ->set_page_dirty Andrew Morton
2021-07-23 22:50 ` [patch 13/15] mm: mmap_lock: fix disabling preemption directly Andrew Morton
2021-07-23 22:50 ` [patch 14/15] mm: fix the deadlock in finish_fault() Andrew Morton
2021-07-23 22:50 ` [patch 15/15] hugetlbfs: fix mount mode command line processing Andrew Morton
2021-07-24 1:41 ` Al Viro
2021-07-26 5:22 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210723225026.A8uSa0Z-U%akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=david@redhat.com \
--cc=groug@kaod.org \
--cc=linux-mm@kvack.org \
--cc=mm-commits@vger.kernel.org \
--cc=rppt@linux.ibm.com \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).