From: Peter Xu <peterx@redhat.com>
To: linux-mm@kvack.org, linux-kernel@vger.kernel.org
Cc: Axel Rasmussen <axelrasmussen@google.com>,
Nadav Amit <nadav.amit@gmail.com>,
Mike Rapoport <rppt@linux.vnet.ibm.com>,
Hugh Dickins <hughd@google.com>,
Mike Kravetz <mike.kravetz@oracle.com>,
"Kirill A . Shutemov" <kirill@shutemov.name>,
Alistair Popple <apopple@nvidia.com>,
Jerome Glisse <jglisse@redhat.com>,
Matthew Wilcox <willy@infradead.org>,
Andrew Morton <akpm@linux-foundation.org>,
peterx@redhat.com, David Hildenbrand <david@redhat.com>,
Andrea Arcangeli <aarcange@redhat.com>
Subject: [PATCH v6 05/23] mm/shmem: Take care of UFFDIO_COPY_MODE_WP
Date: Mon, 15 Nov 2021 15:55:04 +0800 [thread overview]
Message-ID: <20211115075522.73795-6-peterx@redhat.com> (raw)
In-Reply-To: <20211115075522.73795-1-peterx@redhat.com>
Pass wp_copy into shmem_mfill_atomic_pte() through the stack, then apply the
UFFD_WP bit properly when the UFFDIO_COPY on shmem is with UFFDIO_COPY_MODE_WP.
wp_copy lands mfill_atomic_install_pte() finally.
Note: we must do pte_wrprotect() if !writable in mfill_atomic_install_pte(), as
mk_pte() could return a writable pte (e.g., when VM_SHARED on a shmem file).
Signed-off-by: Peter Xu <peterx@redhat.com>
---
include/linux/shmem_fs.h | 4 ++--
mm/shmem.c | 4 ++--
mm/userfaultfd.c | 30 +++++++++++++++++++++---------
3 files changed, 25 insertions(+), 13 deletions(-)
diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h
index 166158b6e917..0ee0f437b14f 100644
--- a/include/linux/shmem_fs.h
+++ b/include/linux/shmem_fs.h
@@ -145,11 +145,11 @@ extern int shmem_mfill_atomic_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd,
struct vm_area_struct *dst_vma,
unsigned long dst_addr,
unsigned long src_addr,
- bool zeropage,
+ bool zeropage, bool wp_copy,
struct page **pagep);
#else /* !CONFIG_SHMEM */
#define shmem_mfill_atomic_pte(dst_mm, dst_pmd, dst_vma, dst_addr, \
- src_addr, zeropage, pagep) ({ BUG(); 0; })
+ src_addr, zeropage, wp_copy, pagep) ({ BUG(); 0; })
#endif /* CONFIG_SHMEM */
#endif /* CONFIG_USERFAULTFD */
diff --git a/mm/shmem.c b/mm/shmem.c
index dc038ce78700..167a46e6a1ff 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -2344,7 +2344,7 @@ int shmem_mfill_atomic_pte(struct mm_struct *dst_mm,
struct vm_area_struct *dst_vma,
unsigned long dst_addr,
unsigned long src_addr,
- bool zeropage,
+ bool zeropage, bool wp_copy,
struct page **pagep)
{
struct inode *inode = file_inode(dst_vma->vm_file);
@@ -2415,7 +2415,7 @@ int shmem_mfill_atomic_pte(struct mm_struct *dst_mm,
goto out_release;
ret = mfill_atomic_install_pte(dst_mm, dst_pmd, dst_vma, dst_addr,
- page, true, false);
+ page, true, wp_copy);
if (ret)
goto out_delete_from_cache;
diff --git a/mm/userfaultfd.c b/mm/userfaultfd.c
index ac6f036298cd..95e5a9ba3196 100644
--- a/mm/userfaultfd.c
+++ b/mm/userfaultfd.c
@@ -70,14 +70,22 @@ int mfill_atomic_install_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd,
_dst_pte = mk_pte(page, dst_vma->vm_page_prot);
_dst_pte = pte_mkdirty(_dst_pte);
- if (page_in_cache && !vm_shared)
+ /* Don't write if uffd-wp wr-protected */
+ if (wp_copy) {
+ _dst_pte = pte_mkuffd_wp(_dst_pte);
writable = false;
- if (writable) {
- if (wp_copy)
- _dst_pte = pte_mkuffd_wp(_dst_pte);
- else
- _dst_pte = pte_mkwrite(_dst_pte);
}
+ /* Don't write if page cache privately mapped */
+ if (page_in_cache && !vm_shared)
+ writable = false;
+ if (writable)
+ _dst_pte = pte_mkwrite(_dst_pte);
+ else
+ /*
+ * We need this to make sure write bit removed; as mk_pte()
+ * could return a pte with write bit set.
+ */
+ _dst_pte = pte_wrprotect(_dst_pte);
dst_pte = pte_offset_map_lock(dst_mm, dst_pmd, dst_addr, &ptl);
@@ -92,7 +100,12 @@ int mfill_atomic_install_pte(struct mm_struct *dst_mm, pmd_t *dst_pmd,
}
ret = -EEXIST;
- if (!pte_none(*dst_pte))
+ /*
+ * We allow to overwrite a pte marker: consider when both MISSING|WP
+ * registered, we firstly wr-protect a none pte which has no page cache
+ * page backing it, then access the page.
+ */
+ if (!pte_none_mostly(*dst_pte))
goto out_unlock;
if (page_in_cache)
@@ -467,11 +480,10 @@ static __always_inline ssize_t mfill_atomic_pte(struct mm_struct *dst_mm,
err = mfill_zeropage_pte(dst_mm, dst_pmd,
dst_vma, dst_addr);
} else {
- VM_WARN_ON_ONCE(wp_copy);
err = shmem_mfill_atomic_pte(dst_mm, dst_pmd, dst_vma,
dst_addr, src_addr,
mode != MCOPY_ATOMIC_NORMAL,
- page);
+ wp_copy, page);
}
return err;
--
2.32.0
next prev parent reply other threads:[~2021-11-15 7:56 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-15 7:54 [PATCH v6 00/23] userfaultfd-wp: Support shmem and hugetlbfs Peter Xu
2021-11-15 7:55 ` [PATCH v6 01/23] mm: Introduce PTE_MARKER swap entry Peter Xu
2021-12-03 3:30 ` Alistair Popple
2021-12-03 4:21 ` Peter Xu
2021-12-03 5:35 ` Alistair Popple
2021-12-03 6:45 ` Peter Xu
2021-12-07 2:12 ` Alistair Popple
2021-12-07 2:30 ` Peter Xu
2021-11-15 7:55 ` [PATCH v6 02/23] mm: Teach core mm about pte markers Peter Xu
2021-11-15 7:55 ` [PATCH v6 03/23] mm: Check against orig_pte for finish_fault() Peter Xu
2021-12-16 5:01 ` Alistair Popple
2021-12-16 5:38 ` Peter Xu
2021-12-16 5:50 ` Peter Xu
2021-12-16 6:23 ` Alistair Popple
2021-12-16 7:06 ` Peter Xu
2021-12-16 7:45 ` Alistair Popple
2021-12-16 8:04 ` Peter Xu
2021-11-15 7:55 ` [PATCH v6 04/23] mm/uffd: PTE_MARKER_UFFD_WP Peter Xu
2021-12-16 5:18 ` Alistair Popple
2021-12-16 5:45 ` Peter Xu
2021-11-15 7:55 ` Peter Xu [this message]
2021-11-15 7:55 ` [PATCH v6 06/23] mm/shmem: Handle uffd-wp special pte in page fault handler Peter Xu
2021-12-16 5:56 ` Alistair Popple
2021-12-16 6:17 ` Peter Xu
2021-12-16 6:30 ` Alistair Popple
2021-11-15 7:55 ` [PATCH v6 07/23] mm/shmem: Persist uffd-wp bit across zapping for file-backed Peter Xu
2021-11-15 8:00 ` [PATCH v6 08/23] mm/shmem: Allow uffd wr-protect none pte for file-backed mem Peter Xu
2021-11-15 8:00 ` [PATCH v6 09/23] mm/shmem: Allows file-back mem to be uffd wr-protected on thps Peter Xu
2021-11-15 8:01 ` [PATCH v6 10/23] mm/shmem: Handle uffd-wp during fork() Peter Xu
2021-11-15 8:01 ` [PATCH v6 11/23] mm/hugetlb: Introduce huge pte version of uffd-wp helpers Peter Xu
2021-11-15 8:01 ` [PATCH v6 12/23] mm/hugetlb: Hook page faults for uffd write protection Peter Xu
2021-11-15 8:01 ` [PATCH v6 13/23] mm/hugetlb: Take care of UFFDIO_COPY_MODE_WP Peter Xu
2021-11-15 8:02 ` [PATCH v6 14/23] mm/hugetlb: Handle UFFDIO_WRITEPROTECT Peter Xu
2021-11-15 8:02 ` [PATCH v6 15/23] mm/hugetlb: Handle pte markers in page faults Peter Xu
2021-11-15 8:02 ` [PATCH v6 16/23] mm/hugetlb: Allow uffd wr-protect none ptes Peter Xu
2021-11-15 8:02 ` [PATCH v6 17/23] mm/hugetlb: Only drop uffd-wp special pte if required Peter Xu
2021-11-15 8:02 ` [PATCH v6 18/23] mm/hugetlb: Handle uffd-wp during fork() Peter Xu
2021-11-15 8:03 ` [PATCH v6 19/23] mm/khugepaged: Don't recycle vma pgtable if uffd-wp registered Peter Xu
2021-11-15 8:03 ` [PATCH v6 20/23] mm/pagemap: Recognize uffd-wp bit for shmem/hugetlbfs Peter Xu
2021-11-15 8:03 ` [PATCH v6 21/23] mm/uffd: Enable write protection for shmem & hugetlbfs Peter Xu
2021-11-15 8:03 ` [PATCH v6 22/23] mm: Enable PTE markers by default Peter Xu
2021-11-15 8:04 ` [PATCH v6 23/23] selftests/uffd: Enable uffd-wp for shmem/hugetlbfs Peter Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211115075522.73795-6-peterx@redhat.com \
--to=peterx@redhat.com \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=apopple@nvidia.com \
--cc=axelrasmussen@google.com \
--cc=david@redhat.com \
--cc=hughd@google.com \
--cc=jglisse@redhat.com \
--cc=kirill@shutemov.name \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mike.kravetz@oracle.com \
--cc=nadav.amit@gmail.com \
--cc=rppt@linux.vnet.ibm.com \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).