linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Patrick Wang <patrick.wang.shcn@gmail.com>
To: catalin.marinas@arm.com, akpm@linux-foundation.org
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	patrick.wang.shcn@gmail.com
Subject: [PATCH] mm: kmemleak: take a full lowmem check in kmemleak_*_phys()
Date: Wed, 13 Apr 2022 20:29:25 +0800	[thread overview]
Message-ID: <20220413122925.33856-1-patrick.wang.shcn@gmail.com> (raw)

The kmemleak_*_phys() apis do not check the address for lowmem's min
boundary, while the caller may pass an address below lowmem, which
will trigger an oops:

# echo scan > /sys/kernel/debug/kmemleak
[   54.888353] Unable to handle kernel paging request at virtual address ff5fffffffe00000
[   54.888932] Oops [#1]
[   54.889102] Modules linked in:
[   54.889326] CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-20220407 #33
[   54.889620] Hardware name: riscv-virtio,qemu (DT)
[   54.889901] epc : scan_block+0x74/0x15c
[   54.890215]  ra : scan_block+0x72/0x15c
[   54.890390] epc : ffffffff801e5806 ra : ffffffff801e5804 sp : ff200000104abc30
[   54.890607]  gp : ffffffff815cd4e8 tp : ff60000004cfa340 t0 : 0000000000000200
[   54.890835]  t1 : 00aaaaaac23954cc t2 : 00000000000003ff s0 : ff200000104abc90
[   54.891024]  s1 : ffffffff81b0ff28 a0 : 0000000000000000 a1 : ff5fffffffe01000
[   54.891201]  a2 : ffffffff81b0ff28 a3 : 0000000000000002 a4 : 0000000000000001
[   54.891377]  a5 : 0000000000000000 a6 : ff200000104abd7c a7 : 0000000000000005
[   54.891552]  s2 : ff5fffffffe00ff9 s3 : ffffffff815cd998 s4 : ffffffff815d0e90
[   54.891727]  s5 : ffffffff81b0ff28 s6 : 0000000000000020 s7 : ffffffff815d0eb0
[   54.891903]  s8 : ffffffffffffffff s9 : ff5fffffffe00000 s10: ff5fffffffe01000
[   54.892078]  s11: 0000000000000022 t3 : 00ffffffaa17db4c t4 : 000000000000000f
[   54.892271]  t5 : 0000000000000001 t6 : 0000000000000000
[   54.892408] status: 0000000000000100 badaddr: ff5fffffffe00000 cause: 000000000000000d
[   54.892643] [<ffffffff801e5a1c>] scan_gray_list+0x12e/0x1a6
[   54.892824] [<ffffffff801e5d3e>] kmemleak_scan+0x2aa/0x57e
[   54.892961] [<ffffffff801e633c>] kmemleak_write+0x32a/0x40c
[   54.893096] [<ffffffff803915ac>] full_proxy_write+0x56/0x82
[   54.893235] [<ffffffff801ef456>] vfs_write+0xa6/0x2a6
[   54.893362] [<ffffffff801ef880>] ksys_write+0x6c/0xe2
[   54.893487] [<ffffffff801ef918>] sys_write+0x22/0x2a
[   54.893609] [<ffffffff8000397c>] ret_from_syscall+0x0/0x2
[   54.894183] ---[ end trace 0000000000000000 ]---

So check the address for lowmem's min boundary.

Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com>
---
 mm/kmemleak.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index acd7cbb82..a182f5dda 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1132,7 +1132,7 @@ EXPORT_SYMBOL(kmemleak_no_scan);
 void __ref kmemleak_alloc_phys(phys_addr_t phys, size_t size, int min_count,
 			       gfp_t gfp)
 {
-	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
+	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_alloc(__va(phys), size, min_count, gfp);
 }
 EXPORT_SYMBOL(kmemleak_alloc_phys);
@@ -1146,7 +1146,7 @@ EXPORT_SYMBOL(kmemleak_alloc_phys);
  */
 void __ref kmemleak_free_part_phys(phys_addr_t phys, size_t size)
 {
-	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
+	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_free_part(__va(phys), size);
 }
 EXPORT_SYMBOL(kmemleak_free_part_phys);
@@ -1158,7 +1158,7 @@ EXPORT_SYMBOL(kmemleak_free_part_phys);
  */
 void __ref kmemleak_not_leak_phys(phys_addr_t phys)
 {
-	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
+	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_not_leak(__va(phys));
 }
 EXPORT_SYMBOL(kmemleak_not_leak_phys);
@@ -1170,7 +1170,7 @@ EXPORT_SYMBOL(kmemleak_not_leak_phys);
  */
 void __ref kmemleak_ignore_phys(phys_addr_t phys)
 {
-	if (!IS_ENABLED(CONFIG_HIGHMEM) || PHYS_PFN(phys) < max_low_pfn)
+	if (PHYS_PFN(phys) >= min_low_pfn && PHYS_PFN(phys) < max_low_pfn)
 		kmemleak_ignore(__va(phys));
 }
 EXPORT_SYMBOL(kmemleak_ignore_phys);
-- 
2.25.1



             reply	other threads:[~2022-04-13 12:29 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-13 12:29 Patrick Wang [this message]
2022-04-13 19:28 ` [PATCH] mm: kmemleak: take a full lowmem check in kmemleak_*_phys() Andrew Morton
2022-04-14  2:40   ` patrick wang
2022-04-14 17:26 ` Catalin Marinas
2022-05-27  4:00 ` Yee Lee

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220413122925.33856-1-patrick.wang.shcn@gmail.com \
    --to=patrick.wang.shcn@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=catalin.marinas@arm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).