linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Peter Collingbourne <pcc@google.com>
To: Andrey Konovalov <andreyknvl@gmail.com>,
	Hyeonggon Yoo <42.hyeyoo@gmail.com>,
	 Andrew Morton <akpm@linux-foundation.org>,
	Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Collingbourne <pcc@google.com>,
	Linux ARM <linux-arm-kernel@lists.infradead.org>,
	 Linux Memory Management List <linux-mm@kvack.org>,
	 Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	vbabka@suse.cz, penberg@kernel.org,  roman.gushchin@linux.dev,
	iamjoonsoo.kim@lge.com, rientjes@google.com,
	 Herbert Xu <herbert@gondor.apana.org.au>,
	Andrey Ryabinin <ryabinin.a.a@gmail.com>,
	 Alexander Potapenko <glider@google.com>,
	Dmitry Vyukov <dvyukov@google.com>,
	 kasan-dev <kasan-dev@googlegroups.com>,
	Eric Biederman <ebiederm@xmission.com>,
	 Kees Cook <keescook@chromium.org>
Subject: [PATCH v4 2/2] mm: make minimum slab alignment a runtime property
Date: Tue, 26 Apr 2022 13:32:31 -0700	[thread overview]
Message-ID: <20220426203231.2107365-2-pcc@google.com> (raw)
In-Reply-To: <20220426203231.2107365-1-pcc@google.com>

When CONFIG_KASAN_HW_TAGS is enabled we currently increase the minimum
slab alignment to 16. This happens even if MTE is not supported in
hardware or disabled via kasan=off, which creates an unnecessary
memory overhead in those cases. Eliminate this overhead by making
the minimum slab alignment a runtime property and only aligning to
16 if KASAN is enabled at runtime.

On a DragonBoard 845c (non-MTE hardware) with a kernel built with
CONFIG_KASAN_HW_TAGS, waiting for quiescence after a full Android
boot I see the following Slab measurements in /proc/meminfo (median
of 3 reboots):

Before: 169020 kB
After:  167304 kB

Link: https://linux-review.googlesource.com/id/I752e725179b43b144153f4b6f584ceb646473ead
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
---
v4:
- add a dependent patch to fix the build with CONFIG_JUMP_LABEL disabled

v3:
- go back to ARCH_SLAB_MINALIGN
- revert changes to fs/binfmt_flat.c
- update arch_slab_minalign() comment to say that it must be a power of two

v2:
- use max instead of max_t in flat_stack_align()

 arch/arm64/include/asm/cache.h | 17 ++++++++++++-----
 include/linux/slab.h           | 12 ++++++++++++
 mm/slab.c                      |  7 +++----
 mm/slab_common.c               |  3 +--
 mm/slob.c                      |  6 +++---
 5 files changed, 31 insertions(+), 14 deletions(-)

diff --git a/arch/arm64/include/asm/cache.h b/arch/arm64/include/asm/cache.h
index a074459f8f2f..22b22dc1b1b5 100644
--- a/arch/arm64/include/asm/cache.h
+++ b/arch/arm64/include/asm/cache.h
@@ -6,6 +6,7 @@
 #define __ASM_CACHE_H
 
 #include <asm/cputype.h>
+#include <asm/mte-def.h>
 
 #define CTR_L1IP_SHIFT		14
 #define CTR_L1IP_MASK		3
@@ -49,16 +50,22 @@
  */
 #define ARCH_DMA_MINALIGN	(128)
 
+#ifndef __ASSEMBLY__
+
+#include <linux/bitops.h>
+#include <linux/kasan-enabled.h>
+
 #ifdef CONFIG_KASAN_SW_TAGS
 #define ARCH_SLAB_MINALIGN	(1ULL << KASAN_SHADOW_SCALE_SHIFT)
 #elif defined(CONFIG_KASAN_HW_TAGS)
-#define ARCH_SLAB_MINALIGN	MTE_GRANULE_SIZE
+static inline size_t arch_slab_minalign(void)
+{
+	return kasan_hw_tags_enabled() ? MTE_GRANULE_SIZE :
+					 __alignof__(unsigned long long);
+}
+#define arch_slab_minalign() arch_slab_minalign()
 #endif
 
-#ifndef __ASSEMBLY__
-
-#include <linux/bitops.h>
-
 #define ICACHEF_ALIASING	0
 #define ICACHEF_VPIPT		1
 extern unsigned long __icache_flags;
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 373b3ef99f4e..2c7190db4cc0 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -209,6 +209,18 @@ void kmem_dump_obj(void *object);
 #define ARCH_SLAB_MINALIGN __alignof__(unsigned long long)
 #endif
 
+/*
+ * Arches can define this function if they want to decide the minimum slab
+ * alignment at runtime. The value returned by the function must be a power
+ * of two and >= ARCH_SLAB_MINALIGN.
+ */
+#ifndef arch_slab_minalign
+static inline size_t arch_slab_minalign(void)
+{
+	return ARCH_SLAB_MINALIGN;
+}
+#endif
+
 /*
  * kmalloc and friends return ARCH_KMALLOC_MINALIGN aligned
  * pointers. kmem_cache_alloc and friends return ARCH_SLAB_MINALIGN
diff --git a/mm/slab.c b/mm/slab.c
index 0edb474edef1..97b756976c8b 100644
--- a/mm/slab.c
+++ b/mm/slab.c
@@ -3009,10 +3009,9 @@ static void *cache_alloc_debugcheck_after(struct kmem_cache *cachep,
 	objp += obj_offset(cachep);
 	if (cachep->ctor && cachep->flags & SLAB_POISON)
 		cachep->ctor(objp);
-	if (ARCH_SLAB_MINALIGN &&
-	    ((unsigned long)objp & (ARCH_SLAB_MINALIGN-1))) {
-		pr_err("0x%px: not aligned to ARCH_SLAB_MINALIGN=%d\n",
-		       objp, (int)ARCH_SLAB_MINALIGN);
+	if ((unsigned long)objp & (arch_slab_minalign() - 1)) {
+		pr_err("0x%px: not aligned to arch_slab_minalign()=%d\n", objp,
+		       (int)arch_slab_minalign());
 	}
 	return objp;
 }
diff --git a/mm/slab_common.c b/mm/slab_common.c
index 2b3206a2c3b5..33cc49810a54 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -154,8 +154,7 @@ static unsigned int calculate_alignment(slab_flags_t flags,
 		align = max(align, ralign);
 	}
 
-	if (align < ARCH_SLAB_MINALIGN)
-		align = ARCH_SLAB_MINALIGN;
+	align = max_t(size_t, align, arch_slab_minalign());
 
 	return ALIGN(align, sizeof(void *));
 }
diff --git a/mm/slob.c b/mm/slob.c
index 40ea6e2d4ccd..3bd2669bd690 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -478,7 +478,7 @@ static __always_inline void *
 __do_kmalloc_node(size_t size, gfp_t gfp, int node, unsigned long caller)
 {
 	unsigned int *m;
-	int minalign = max_t(size_t, ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN);
+	int minalign = max_t(size_t, ARCH_KMALLOC_MINALIGN, arch_slab_minalign());
 	void *ret;
 
 	gfp &= gfp_allowed_mask;
@@ -555,7 +555,7 @@ void kfree(const void *block)
 
 	sp = virt_to_folio(block);
 	if (folio_test_slab(sp)) {
-		int align = max_t(size_t, ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN);
+		int align = max_t(size_t, ARCH_KMALLOC_MINALIGN, arch_slab_minalign());
 		unsigned int *m = (unsigned int *)(block - align);
 		slob_free(m, *m + align);
 	} else {
@@ -584,7 +584,7 @@ size_t __ksize(const void *block)
 	if (unlikely(!folio_test_slab(folio)))
 		return folio_size(folio);
 
-	align = max_t(size_t, ARCH_KMALLOC_MINALIGN, ARCH_SLAB_MINALIGN);
+	align = max_t(size_t, ARCH_KMALLOC_MINALIGN, arch_slab_minalign());
 	m = (unsigned int *)(block - align);
 	return SLOB_UNITS(*m) * SLOB_UNIT;
 }
-- 
2.36.0.rc2.479.g8af0fa9b8e-goog



  reply	other threads:[~2022-04-26 20:32 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-26 20:32 [PATCH v4 1/2] printk: stop including cache.h from printk.h Peter Collingbourne
2022-04-26 20:32 ` Peter Collingbourne [this message]
2022-04-27  3:25 ` kernel test robot
2022-04-27  9:25 ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220426203231.2107365-2-pcc@google.com \
    --to=pcc@google.com \
    --cc=42.hyeyoo@gmail.com \
    --cc=akpm@linux-foundation.org \
    --cc=andreyknvl@gmail.com \
    --cc=catalin.marinas@arm.com \
    --cc=dvyukov@google.com \
    --cc=ebiederm@xmission.com \
    --cc=glider@google.com \
    --cc=herbert@gondor.apana.org.au \
    --cc=iamjoonsoo.kim@lge.com \
    --cc=kasan-dev@googlegroups.com \
    --cc=keescook@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=penberg@kernel.org \
    --cc=rientjes@google.com \
    --cc=roman.gushchin@linux.dev \
    --cc=ryabinin.a.a@gmail.com \
    --cc=vbabka@suse.cz \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).