[PATCH 0/7] Add basic trace events for vmap/vmalloc

linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed

* [PATCH 0/7] Add basic trace events for vmap/vmalloc
@ 2022-10-17 16:02 Uladzislau Rezki (Sony)
  2022-10-17 16:02 ` [PATCH 1/7] mm: vmap: Add alloc_vmap_area trace event Uladzislau Rezki (Sony)
                   ` (8 more replies)
  0 siblings, 9 replies; 16+ messages in thread
From: Uladzislau Rezki (Sony) @ 2022-10-17 16:02 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-mm, LKML, Christoph Hellwig, Matthew Wilcox,
	Nicholas Piggin, Uladzislau Rezki, Oleksiy Avramchenko

1. This small series add some basic trace events for the vmap/vmalloc code. 
Since currently we are lack of any, sometimes it is hard to start debuging
a vmap code if an issue is reported or occured.

For example https://lore.kernel.org/linux-mm/Y0p8BZIiDXLQbde%2F@pc636/T/

2. The latest patch adds two reviewers for vmalloc code.

Uladzislau Rezki (Sony) (7):
  mm: vmap: Add alloc_vmap_area trace event
  mm: vmap: Add purge_vmap_area_lazy trace event
  mm: vmap: Add free_vmap_area_noflush trace event
  mm/vmalloc: Use a trace_alloc_vmap_area event
  mm/vmalloc: Use a trace_purge_vmap_area_lazy event
  mm/vmalloc: Use a trace_free_vmap_area_noflush event
  vmalloc: Add reviewers for vmalloc code

 MAINTAINERS                 |  12 +++-
 include/trace/events/vmap.h | 123 ++++++++++++++++++++++++++++++++++++
 mm/vmalloc.c                |  20 +++++-
 3 files changed, 151 insertions(+), 4 deletions(-)
 create mode 100644 include/trace/events/vmap.h

-- 
2.30.2



^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH 1/7] mm: vmap: Add alloc_vmap_area trace event
  2022-10-17 16:02 [PATCH 0/7] Add basic trace events for vmap/vmalloc Uladzislau Rezki (Sony)
@ 2022-10-17 16:02 ` Uladzislau Rezki (Sony)
  2022-10-18 16:41   ` Steven Rostedt
  2022-10-17 16:02 ` [PATCH 2/7] mm: vmap: Add a purge_vmap_area_lazy " Uladzislau Rezki (Sony)
                   ` (7 subsequent siblings)
  8 siblings, 1 reply; 16+ messages in thread
From: Uladzislau Rezki (Sony) @ 2022-10-17 16:02 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-mm, LKML, Christoph Hellwig, Matthew Wilcox,
	Nicholas Piggin, Uladzislau Rezki, Oleksiy Avramchenko

It is for a debug purpose and for validation of passed parameters.

To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
---
 include/trace/events/vmap.h | 56 +++++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 include/trace/events/vmap.h

diff --git a/include/trace/events/vmap.h b/include/trace/events/vmap.h
new file mode 100644
index 000000000000..504870d95a4e
--- /dev/null
+++ b/include/trace/events/vmap.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM vmap
+
+#if !defined(_TRACE_VMAP_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_VMAP_H
+
+#include <linux/tracepoint.h>
+
+/**
+ * alloc_vmap_area - called when a new vmap allocation occurs
+ * @addr:	an allocated address
+ * @size:	a requested size
+ * @align:	a requested alignment
+ * @vstart:	a requested start range
+ * @vend:	a requested end range
+ * @failed:	an allocation failed or not
+ *
+ * This event is used for a debug purpose, it can give an extra
+ * information for a developer about how often it occurs and which
+ * parameters are passed for further validation.
+ */
+TRACE_EVENT(alloc_vmap_area,
+
+	TP_PROTO(unsigned long addr, unsigned long size, unsigned long align,
+		unsigned long vstart, unsigned long vend, int failed),
+
+	TP_ARGS(addr, size, align, vstart, vend, failed),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, addr)
+		__field(unsigned long, size)
+		__field(unsigned long, align)
+		__field(unsigned long, vstart)
+		__field(unsigned long, vend)
+		__field(int, failed)
+	),
+
+	TP_fast_assign(
+		__entry->addr = addr;
+		__entry->size = size;
+		__entry->align = align;
+		__entry->vstart = vstart;
+		__entry->vend = vend;
+		__entry->failed = failed;
+	),
+
+	TP_printk("va_start: %lu size=%lu align=%lu vstart=0x%lx vend=0x%lx failed=%d",
+		__entry->addr, __entry->size, __entry->align,
+		__entry->vstart, __entry->vend, __entry->failed)
+);
+
+#endif /*  _TRACE_VMAP_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
-- 
2.30.2



^ permalink raw reply related	[flat|nested] 16+ messages in thread

* Re: [PATCH 1/7] mm: vmap: Add alloc_vmap_area trace event
  2022-10-17 16:02 ` [PATCH 1/7] mm: vmap: Add alloc_vmap_area trace event Uladzislau Rezki (Sony)
@ 2022-10-18 16:41   ` Steven Rostedt
  2022-10-18 16:57     ` Uladzislau Rezki
  0 siblings, 1 reply; 16+ messages in thread
From: Steven Rostedt @ 2022-10-18 16:41 UTC (permalink / raw)
  To: Uladzislau Rezki (Sony)
  Cc: Andrew Morton, linux-mm, LKML, Christoph Hellwig, Matthew Wilcox,
	Nicholas Piggin, Oleksiy Avramchenko

On Mon, 17 Oct 2022 18:02:25 +0200
"Uladzislau Rezki (Sony)" <urezki@gmail.com> wrote:

> It is for a debug purpose and for validation of passed parameters.
> 
> To: Steven Rostedt <rostedt@goodmis.org>

FYI, it's "Cc:" not "To:" as I did not receive this email (nor patches 2 or 3).

> Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>

-- Steve


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 1/7] mm: vmap: Add alloc_vmap_area trace event
  2022-10-18 16:41   ` Steven Rostedt
@ 2022-10-18 16:57     ` Uladzislau Rezki
  0 siblings, 0 replies; 16+ messages in thread
From: Uladzislau Rezki @ 2022-10-18 16:57 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Uladzislau Rezki (Sony), Andrew Morton, linux-mm, LKML,
	Christoph Hellwig, Matthew Wilcox, Nicholas Piggin,
	Oleksiy Avramchenko

On Tue, Oct 18, 2022 at 12:41:27PM -0400, Steven Rostedt wrote:
> On Mon, 17 Oct 2022 18:02:25 +0200
> "Uladzislau Rezki (Sony)" <urezki@gmail.com> wrote:
> 
> > It is for a debug purpose and for validation of passed parameters.
> > 
> > To: Steven Rostedt <rostedt@goodmis.org>
> 
> FYI, it's "Cc:" not "To:" as I did not receive this email (nor patches 2 or 3).
> 
OK. I will resend it anyway and just put you in Cc instead.

Thanks!

--
Uladzislau Rezki


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH 2/7] mm: vmap: Add a purge_vmap_area_lazy trace event
  2022-10-17 16:02 [PATCH 0/7] Add basic trace events for vmap/vmalloc Uladzislau Rezki (Sony)
  2022-10-17 16:02 ` [PATCH 1/7] mm: vmap: Add alloc_vmap_area trace event Uladzislau Rezki (Sony)
@ 2022-10-17 16:02 ` Uladzislau Rezki (Sony)
  2022-10-17 16:02 ` [PATCH 2/7] mm: vmap: Add " Uladzislau Rezki (Sony)
                   ` (6 subsequent siblings)
  8 siblings, 0 replies; 16+ messages in thread
From: Uladzislau Rezki (Sony) @ 2022-10-17 16:02 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-mm, LKML, Christoph Hellwig, Matthew Wilcox,
	Nicholas Piggin, Uladzislau Rezki, Oleksiy Avramchenko

It is for debug purpose to track number of freed vmaps
including a range it occurs on.

To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
---
 include/trace/events/vmap.h | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/include/trace/events/vmap.h b/include/trace/events/vmap.h
index 504870d95a4e..2af2b84c6eb7 100644
--- a/include/trace/events/vmap.h
+++ b/include/trace/events/vmap.h
@@ -50,6 +50,39 @@ TRACE_EVENT(alloc_vmap_area,
 		__entry->vstart, __entry->vend, __entry->failed)
 );
 
+/**
+ * purge_vmap_area_lazy - called when vmap areas were lazily freed
+ * @start:		purging start address
+ * @end:		purging end address
+ * @npurged:	numbed of purged vmap areas
+ *
+ * This event is used for a debug purpose. It gives some
+ * indication about start:end range and how many objects
+ * are released.
+ */
+TRACE_EVENT(purge_vmap_area_lazy,
+
+	TP_PROTO(unsigned long start, unsigned long end,
+		unsigned int npurged),
+
+	TP_ARGS(start, end, npurged),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, start)
+		__field(unsigned long, end)
+		__field(unsigned int, npurged)
+	),
+
+	TP_fast_assign(
+		__entry->start = start;
+		__entry->end = end;
+		__entry->npurged = npurged;
+	),
+
+	TP_printk("start=0x%lx end=0x%lx num_purged=%u",
+		__entry->start, __entry->end, __entry->npurged)
+);
+
 #endif /*  _TRACE_VMAP_H */
 
 /* This part must be outside protection */
-- 
2.30.2



^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 2/7] mm: vmap: Add purge_vmap_area_lazy trace event
  2022-10-17 16:02 [PATCH 0/7] Add basic trace events for vmap/vmalloc Uladzislau Rezki (Sony)
  2022-10-17 16:02 ` [PATCH 1/7] mm: vmap: Add alloc_vmap_area trace event Uladzislau Rezki (Sony)
  2022-10-17 16:02 ` [PATCH 2/7] mm: vmap: Add a purge_vmap_area_lazy " Uladzislau Rezki (Sony)
@ 2022-10-17 16:02 ` Uladzislau Rezki (Sony)
  2022-10-17 16:02 ` [PATCH 3/7] mm: vmap: Add a free_vmap_area_noflush " Uladzislau Rezki (Sony)
                   ` (5 subsequent siblings)
  8 siblings, 0 replies; 16+ messages in thread
From: Uladzislau Rezki (Sony) @ 2022-10-17 16:02 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-mm, LKML, Christoph Hellwig, Matthew Wilcox,
	Nicholas Piggin, Uladzislau Rezki, Oleksiy Avramchenko

It is for debug purpose to track number of freed vmaps
including a range it occurs on.

To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
---
 include/trace/events/vmap.h | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/include/trace/events/vmap.h b/include/trace/events/vmap.h
index 504870d95a4e..2af2b84c6eb7 100644
--- a/include/trace/events/vmap.h
+++ b/include/trace/events/vmap.h
@@ -50,6 +50,39 @@ TRACE_EVENT(alloc_vmap_area,
 		__entry->vstart, __entry->vend, __entry->failed)
 );
 
+/**
+ * purge_vmap_area_lazy - called when vmap areas were lazily freed
+ * @start:		purging start address
+ * @end:		purging end address
+ * @npurged:	numbed of purged vmap areas
+ *
+ * This event is used for a debug purpose. It gives some
+ * indication about start:end range and how many objects
+ * are released.
+ */
+TRACE_EVENT(purge_vmap_area_lazy,
+
+	TP_PROTO(unsigned long start, unsigned long end,
+		unsigned int npurged),
+
+	TP_ARGS(start, end, npurged),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, start)
+		__field(unsigned long, end)
+		__field(unsigned int, npurged)
+	),
+
+	TP_fast_assign(
+		__entry->start = start;
+		__entry->end = end;
+		__entry->npurged = npurged;
+	),
+
+	TP_printk("start=0x%lx end=0x%lx num_purged=%u",
+		__entry->start, __entry->end, __entry->npurged)
+);
+
 #endif /*  _TRACE_VMAP_H */
 
 /* This part must be outside protection */
-- 
2.30.2



^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 3/7] mm: vmap: Add a free_vmap_area_noflush trace event
  2022-10-17 16:02 [PATCH 0/7] Add basic trace events for vmap/vmalloc Uladzislau Rezki (Sony)
                   ` (2 preceding siblings ...)
  2022-10-17 16:02 ` [PATCH 2/7] mm: vmap: Add " Uladzislau Rezki (Sony)
@ 2022-10-17 16:02 ` Uladzislau Rezki (Sony)
  2022-10-17 16:02 ` [PATCH 3/7] mm: vmap: Add " Uladzislau Rezki (Sony)
                   ` (4 subsequent siblings)
  8 siblings, 0 replies; 16+ messages in thread
From: Uladzislau Rezki (Sony) @ 2022-10-17 16:02 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-mm, LKML, Christoph Hellwig, Matthew Wilcox,
	Nicholas Piggin, Uladzislau Rezki, Oleksiy Avramchenko

This event is used in order to validate/debug a start address
of freed VA, number of currently outstanding and maximum allowed
areas.

To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
---
 include/trace/events/vmap.h | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/include/trace/events/vmap.h b/include/trace/events/vmap.h
index 2af2b84c6eb7..5ba9bf58772a 100644
--- a/include/trace/events/vmap.h
+++ b/include/trace/events/vmap.h
@@ -83,6 +83,40 @@ TRACE_EVENT(purge_vmap_area_lazy,
 		__entry->start, __entry->end, __entry->npurged)
 );
 
+/**
+ * free_vmap_area_noflush - called when a vmap area is freed
+ * @va_start:		a start address of VA
+ * @nr_lazy:		number of current lazy pages
+ * @nr_lazy_max:	number of maximum lazy pages
+ *
+ * This event is used for a debug purpose. It gives some
+ * indication about a VA that is released, number of current
+ * outstanding areas and a maximum allowed threshold before
+ * dropping all of them.
+ */
+TRACE_EVENT(free_vmap_area_noflush,
+
+	TP_PROTO(unsigned long va_start, unsigned long nr_lazy,
+		unsigned long nr_lazy_max),
+
+	TP_ARGS(va_start, nr_lazy, nr_lazy_max),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, va_start)
+		__field(unsigned long, nr_lazy)
+		__field(unsigned long, nr_lazy_max)
+	),
+
+	TP_fast_assign(
+		__entry->va_start = va_start;
+		__entry->nr_lazy = nr_lazy;
+		__entry->nr_lazy_max = nr_lazy_max;
+	),
+
+	TP_printk("va_start=0x%lx nr_lazy=%lu nr_lazy_max=%lu",
+		__entry->va_start, __entry->nr_lazy, __entry->nr_lazy_max)
+);
+
 #endif /*  _TRACE_VMAP_H */
 
 /* This part must be outside protection */
-- 
2.30.2



^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 3/7] mm: vmap: Add free_vmap_area_noflush trace event
  2022-10-17 16:02 [PATCH 0/7] Add basic trace events for vmap/vmalloc Uladzislau Rezki (Sony)
                   ` (3 preceding siblings ...)
  2022-10-17 16:02 ` [PATCH 3/7] mm: vmap: Add a free_vmap_area_noflush " Uladzislau Rezki (Sony)
@ 2022-10-17 16:02 ` Uladzislau Rezki (Sony)
  2022-10-17 16:02 ` [PATCH 4/7] mm/vmalloc: Use a trace_alloc_vmap_area event Uladzislau Rezki (Sony)
                   ` (3 subsequent siblings)
  8 siblings, 0 replies; 16+ messages in thread
From: Uladzislau Rezki (Sony) @ 2022-10-17 16:02 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-mm, LKML, Christoph Hellwig, Matthew Wilcox,
	Nicholas Piggin, Uladzislau Rezki, Oleksiy Avramchenko

This event is used in order to validate/debug a start address
of freed VA, number of currently outstanding and maximum allowed
areas.

To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
---
 include/trace/events/vmap.h | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/include/trace/events/vmap.h b/include/trace/events/vmap.h
index 2af2b84c6eb7..5ba9bf58772a 100644
--- a/include/trace/events/vmap.h
+++ b/include/trace/events/vmap.h
@@ -83,6 +83,40 @@ TRACE_EVENT(purge_vmap_area_lazy,
 		__entry->start, __entry->end, __entry->npurged)
 );
 
+/**
+ * free_vmap_area_noflush - called when a vmap area is freed
+ * @va_start:		a start address of VA
+ * @nr_lazy:		number of current lazy pages
+ * @nr_lazy_max:	number of maximum lazy pages
+ *
+ * This event is used for a debug purpose. It gives some
+ * indication about a VA that is released, number of current
+ * outstanding areas and a maximum allowed threshold before
+ * dropping all of them.
+ */
+TRACE_EVENT(free_vmap_area_noflush,
+
+	TP_PROTO(unsigned long va_start, unsigned long nr_lazy,
+		unsigned long nr_lazy_max),
+
+	TP_ARGS(va_start, nr_lazy, nr_lazy_max),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, va_start)
+		__field(unsigned long, nr_lazy)
+		__field(unsigned long, nr_lazy_max)
+	),
+
+	TP_fast_assign(
+		__entry->va_start = va_start;
+		__entry->nr_lazy = nr_lazy;
+		__entry->nr_lazy_max = nr_lazy_max;
+	),
+
+	TP_printk("va_start=0x%lx nr_lazy=%lu nr_lazy_max=%lu",
+		__entry->va_start, __entry->nr_lazy, __entry->nr_lazy_max)
+);
+
 #endif /*  _TRACE_VMAP_H */
 
 /* This part must be outside protection */
-- 
2.30.2



^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 4/7] mm/vmalloc: Use a trace_alloc_vmap_area event
  2022-10-17 16:02 [PATCH 0/7] Add basic trace events for vmap/vmalloc Uladzislau Rezki (Sony)
                   ` (4 preceding siblings ...)
  2022-10-17 16:02 ` [PATCH 3/7] mm: vmap: Add " Uladzislau Rezki (Sony)
@ 2022-10-17 16:02 ` Uladzislau Rezki (Sony)
  2022-10-17 19:12   ` kernel test robot
  2022-10-17 16:02 ` [PATCH 5/7] mm/vmalloc: Use a trace_purge_vmap_area_lazy event Uladzislau Rezki (Sony)
                   ` (2 subsequent siblings)
  8 siblings, 1 reply; 16+ messages in thread
From: Uladzislau Rezki (Sony) @ 2022-10-17 16:02 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-mm, LKML, Christoph Hellwig, Matthew Wilcox,
	Nicholas Piggin, Uladzislau Rezki, Oleksiy Avramchenko,
	Steven Rostedt

This is for debug purpose and is called when an allocation
attempt occurs. This event gives some information about:
- a start address of allocated area;
- a size that is requested;
- an align that is required;
- vstart/vend restriction;
- if an allocation fails.

Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
---
 mm/vmalloc.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 83b54beb12fa..f4397817ccd7 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -43,6 +43,9 @@
 #include <asm/tlbflush.h>
 #include <asm/shmparam.h>
 
+#define CREATE_TRACE_POINTS
+#include <trace/events/vmap.h>
+
 #include "internal.h"
 #include "pgalloc-track.h"
 
@@ -1621,6 +1624,8 @@ static struct vmap_area *alloc_vmap_area(unsigned long size,
 		size, align, vstart, vend);
 	spin_unlock(&free_vmap_area_lock);
 
+	trace_alloc_vmap_area(addr, size, align, vstart, vend, addr == vend);
+
 	/*
 	 * If an allocation fails, the "vend" address is
 	 * returned. Therefore trigger the overflow path.
-- 
2.30.2



^ permalink raw reply related	[flat|nested] 16+ messages in thread

* Re: [PATCH 4/7] mm/vmalloc: Use a trace_alloc_vmap_area event
  2022-10-17 16:02 ` [PATCH 4/7] mm/vmalloc: Use a trace_alloc_vmap_area event Uladzislau Rezki (Sony)
@ 2022-10-17 19:12   ` kernel test robot
  2022-10-18 16:17     ` Uladzislau Rezki
  0 siblings, 1 reply; 16+ messages in thread
From: kernel test robot @ 2022-10-17 19:12 UTC (permalink / raw)
  To: Uladzislau Rezki (Sony), Andrew Morton
  Cc: kbuild-all, Linux Memory Management List, LKML, Christoph Hellwig,
	Matthew Wilcox, Nicholas Piggin, Uladzislau Rezki,
	Oleksiy Avramchenko, Steven Rostedt

[-- Attachment #1: Type: text/plain, Size: 2536 bytes --]

Hi Uladzislau,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on akpm-mm/mm-everything]
[also build test ERROR on linus/master v6.1-rc1 next-20221017]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Uladzislau-Rezki-Sony/Add-basic-trace-events-for-vmap-vmalloc/20221018-000544
base:   https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-everything
patch link:    https://lore.kernel.org/r/20221017160233.16582-7-urezki%40gmail.com
patch subject: [PATCH 4/7] mm/vmalloc: Use a trace_alloc_vmap_area event
config: um-i386_defconfig
compiler: gcc-11 (Debian 11.3.0-8) 11.3.0
reproduce (this is a W=1 build):
        # https://github.com/intel-lab-lkp/linux/commit/fbc853c689b29d3bb9fe250b2653fd2dd8046fc7
        git remote add linux-review https://github.com/intel-lab-lkp/linux
        git fetch --no-tags linux-review Uladzislau-Rezki-Sony/Add-basic-trace-events-for-vmap-vmalloc/20221018-000544
        git checkout fbc853c689b29d3bb9fe250b2653fd2dd8046fc7
        # save the config file
        mkdir build_dir && cp config build_dir/.config
        make W=1 O=build_dir ARCH=um SUBARCH=i386 SHELL=/bin/bash

If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   In file included from include/trace/events/vmap.h:123,
                    from mm/vmalloc.c:47:
>> include/trace/define_trace.h:84:34: fatal error: trace/events/kernel_vmap.h: No such file or directory
      84 | # define __TRACE_INCLUDE(system) <trace/events/system.h>
         |                                  ^
   compilation terminated.


vim +84 include/trace/define_trace.h

a8d154b0091683 Steven Rostedt 2009-04-10  82  
a8d154b0091683 Steven Rostedt 2009-04-10  83  #ifndef TRACE_INCLUDE_PATH
ad8d75fff811a6 Steven Rostedt 2009-04-14 @84  # define __TRACE_INCLUDE(system) <trace/events/system.h>
c2518c4366f087 Steven Rostedt 2009-04-23  85  # define UNDEF_TRACE_INCLUDE_PATH
a8d154b0091683 Steven Rostedt 2009-04-10  86  #else
a8d154b0091683 Steven Rostedt 2009-04-10  87  # define __TRACE_INCLUDE(system) __stringify(TRACE_INCLUDE_PATH/system.h)
a8d154b0091683 Steven Rostedt 2009-04-10  88  #endif
a8d154b0091683 Steven Rostedt 2009-04-10  89  

-- 
0-DAY CI Kernel Test Service
https://01.org/lkp

[-- Attachment #2: config --]
[-- Type: text/plain, Size: 42255 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/um 6.1.0-rc1 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="gcc-11 (Debian 11.3.0-8) 11.3.0"
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=110300
CONFIG_CLANG_VERSION=0
CONFIG_AS_IS_GNU=y
CONFIG_AS_VERSION=23900
CONFIG_LD_IS_BFD=y
CONFIG_LD_VERSION=23900
CONFIG_LLD_VERSION=0
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=123
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=128
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BUILD_SALT=""
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_WATCH_QUEUE is not set
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_SHOW=y
# end of IRQ subsystem

CONFIG_GENERIC_CLOCKEVENTS=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# end of Timers subsystem

CONFIG_BPF=y

#
# BPF subsystem
#
# CONFIG_BPF_SYSCALL is not set
# end of BPF subsystem

CONFIG_PREEMPT_NONE_BUILD=y
CONFIG_PREEMPT_NONE=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

#
# RCU Subsystem
#
CONFIG_TINY_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TINY_SRCU=y
# end of RCU Subsystem

CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13

#
# Scheduler features
#
# end of Scheduler features

CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
# CONFIG_MEMCG is not set
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
# CONFIG_SCHED_AUTOGROUP is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
# CONFIG_EXPERT is not set
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SYSFS_SYSCALL=y
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_EMBEDDED is not set

#
# Kernel Performance Events And Counters
#
# end of Kernel Performance Events And Counters

# CONFIG_PROFILING is not set
# end of General setup

#
# UML-specific options
#
CONFIG_UML=y
CONFIG_MMU=y
CONFIG_NO_IOMEM=y
CONFIG_NO_IOPORT_MAP=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HZ=100
CONFIG_NR_CPUS=1
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y

#
# Host processor type and features
#
# CONFIG_M486SX is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=5
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=6
CONFIG_IA32_FEAT_CTL=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_ZHAOXIN=y
CONFIG_CPU_SUP_VORTEX_32=y
# end of Host processor type and features

CONFIG_UML_X86=y
CONFIG_X86_32=y
CONFIG_3_LEVEL_PGTABLES=y
CONFIG_ARCH_HAS_SC_SIGNALS=y
CONFIG_ARCH_REUSE_HOST_VSYSCALL_AREA=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_STATIC_LINK is not set
CONFIG_LD_SCRIPT_DYN=y
CONFIG_LD_SCRIPT_DYN_RPATH=y
CONFIG_HOSTFS=y
CONFIG_MCONSOLE=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_KERNEL_STACK_ORDER=1
# CONFIG_MMAPPER is not set
CONFIG_PGTABLE_LEVELS=3
# CONFIG_UML_TIME_TRAVEL_SUPPORT is not set
# end of UML-specific options

#
# UML Character Devices
#
CONFIG_STDERR_CONSOLE=y
CONFIG_SSL=y
CONFIG_NULL_CHAN=y
CONFIG_PORT_CHAN=y
CONFIG_PTY_CHAN=y
CONFIG_TTY_CHAN=y
CONFIG_XTERM_CHAN=y
CONFIG_XTERM_CHAN_DEFAULT_EMULATOR="xterm"
CONFIG_CON_ZERO_CHAN="fd:0,fd:1"
CONFIG_CON_CHAN="pts"
CONFIG_SSL_CHAN="pts"
CONFIG_UML_SOUND=m
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_HOSTAUDIO=m
# end of UML Character Devices

#
# UML Network Devices
#
CONFIG_UML_NET=y
CONFIG_UML_NET_ETHERTAP=y
CONFIG_UML_NET_TUNTAP=y
CONFIG_UML_NET_SLIP=y
CONFIG_UML_NET_DAEMON=y
CONFIG_UML_NET_DAEMON_DEFAULT_SOCK="/tmp/uml.ctl"
# CONFIG_UML_NET_VECTOR is not set
# CONFIG_UML_NET_VDE is not set
CONFIG_UML_NET_MCAST=y
# CONFIG_UML_NET_PCAP is not set
CONFIG_UML_NET_SLIRP=y
# end of UML Network Devices

# CONFIG_VIRTIO_UML is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_PM_SLEEP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_USERSPACE_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_LTO_NONE=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_NO_PREEMPT=y
CONFIG_ARCH_EPHEMERAL_INODES=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y

#
# GCOV-based kernel profiling
#
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_GCC_PLUGINS=y
# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
CONFIG_BLOCK=y
CONFIG_BLOCK_LEGACY_AUTOLOAD=y
CONFIG_BLK_ICQ=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_DEV_ZONED is not set
# CONFIG_BLK_DEV_THROTTLING is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_EFI_PARTITION=y
# end of Partition Types

CONFIG_BLK_PM=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
CONFIG_IOSCHED_BFQ=m
# CONFIG_BFQ_GROUP_IOSCHED is not set
# end of IO Schedulers

CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_SWAP=y
# CONFIG_ZSWAP is not set

#
# SLAB allocator options
#
CONFIG_SLAB=y
# CONFIG_SLUB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
# CONFIG_SLAB_FREELIST_HARDENED is not set
# end of SLAB allocator options

# CONFIG_SHUFFLE_PAGE_ALLOCATOR is not set
CONFIG_COMPAT_BRK=y
CONFIG_FLATMEM=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_COMPACTION is not set
# CONFIG_PAGE_REPORTING is not set
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_NEED_PER_CPU_KM=y
# CONFIG_CMA is not set
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set

#
# GUP_TEST needs to have DEBUG_FS enabled
#
# CONFIG_ANON_VMA_NAME is not set
# CONFIG_USERFAULTFD is not set
# CONFIG_LRU_GEN is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
# CONFIG_UNIX_DIAG is not set
# CONFIG_TLS is not set
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_FOU is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_MPTCP is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
# CONFIG_MCTP is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
# CONFIG_FAILOVER is not set
CONFIG_ETHTOOL_NETLINK=y

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_DEVTMPFS_SAFE is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER is not set
# CONFIG_FW_LOADER_COMPRESS is not set
CONFIG_FW_CACHE=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_DEVICES=y
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

# CONFIG_CONNECTOR is not set

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

# CONFIG_GOOGLE_FIRMWARE is not set

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_BLK_DEV_UBD=y
# CONFIG_BLK_DEV_UBD_SYNC is not set
CONFIG_BLK_DEV_COW_COMMON=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
# CONFIG_NVME_TCP is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_DUMMY_IRQ is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
# end of EEPROM support

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

#
# Altera FPGA firmware download module (requires I2C)
#
# CONFIG_ECHO is not set
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# end of SCSI device support

# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=m
# CONFIG_WIREGUARD is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
# CONFIG_NETCONSOLE is not set
CONFIG_TUN=m
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_ALACRITECH=y
CONFIG_NET_VENDOR_AMAZON=y
CONFIG_NET_VENDOR_AQUANTIA=y
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ASIX=y
CONFIG_NET_VENDOR_CAVIUM=y
CONFIG_NET_VENDOR_CORTINA=y
CONFIG_NET_VENDOR_DAVICOM=y
CONFIG_NET_VENDOR_ENGLEDER=y
CONFIG_NET_VENDOR_EZCHIP=y
CONFIG_NET_VENDOR_FUNGIBLE=y
CONFIG_NET_VENDOR_GOOGLE=y
CONFIG_NET_VENDOR_HUAWEI=y
CONFIG_NET_VENDOR_I825XX=y
CONFIG_NET_VENDOR_INTEL=y
CONFIG_NET_VENDOR_WANGXUN=y
CONFIG_NET_VENDOR_LITEX=y
CONFIG_NET_VENDOR_MARVELL=y
CONFIG_NET_VENDOR_MICROCHIP=y
CONFIG_NET_VENDOR_MICROSEMI=y
CONFIG_NET_VENDOR_MICROSOFT=y
CONFIG_NET_VENDOR_NI=y
CONFIG_NET_VENDOR_NATSEMI=y
CONFIG_NET_VENDOR_NETRONOME=y
CONFIG_NET_VENDOR_8390=y
CONFIG_NET_VENDOR_PENSANDO=y
CONFIG_NET_VENDOR_QUALCOMM=y
# CONFIG_RMNET is not set
CONFIG_NET_VENDOR_RENESAS=y
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
CONFIG_NET_VENDOR_SOLARFLARE=y
CONFIG_NET_VENDOR_SOCIONEXT=y
CONFIG_NET_VENDOR_SYNOPSYS=y
CONFIG_NET_VENDOR_VERTEXCOM=y
CONFIG_NET_VENDOR_VIA=y
CONFIG_NET_VENDOR_XILINX=y
# CONFIG_PHYLIB is not set
# CONFIG_PSE_CONTROLLER is not set
# CONFIG_MDIO_DEVICE is not set

#
# PCS device drivers
#
# end of PCS device drivers

CONFIG_PPP=m
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_PPP_DEFLATE is not set
# CONFIG_PPP_FILTER is not set
# CONFIG_PPP_MPPE is not set
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPPOE is not set
# CONFIG_PPP_ASYNC is not set
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_SLIP=m
CONFIG_SLHC=m
# CONFIG_SLIP_COMPRESSED is not set
# CONFIG_SLIP_SMART is not set
# CONFIG_SLIP_MODE_SLIP6 is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_WLAN=y
CONFIG_WLAN_VENDOR_ADMTEK=y
CONFIG_WLAN_VENDOR_ATH=y
# CONFIG_ATH_DEBUG is not set
CONFIG_WLAN_VENDOR_ATMEL=y
CONFIG_WLAN_VENDOR_BROADCOM=y
CONFIG_WLAN_VENDOR_CISCO=y
CONFIG_WLAN_VENDOR_INTEL=y
CONFIG_WLAN_VENDOR_INTERSIL=y
# CONFIG_HOSTAP is not set
CONFIG_WLAN_VENDOR_MARVELL=y
CONFIG_WLAN_VENDOR_MEDIATEK=y
CONFIG_WLAN_VENDOR_MICROCHIP=y
CONFIG_WLAN_VENDOR_PURELIFI=y
CONFIG_WLAN_VENDOR_RALINK=y
CONFIG_WLAN_VENDOR_REALTEK=y
CONFIG_WLAN_VENDOR_RSI=y
CONFIG_WLAN_VENDOR_SILABS=y
CONFIG_WLAN_VENDOR_ST=y
CONFIG_WLAN_VENDOR_TI=y
CONFIG_WLAN_VENDOR_ZYDAS=y
CONFIG_WLAN_VENDOR_QUANTENNA=y
# CONFIG_WAN is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

# CONFIG_NET_FAILOVER is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
CONFIG_INPUT_VIVALDIFMAP=y

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_USERIO is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=32
CONFIG_LDISC_AUTOLOAD=y
# CONFIG_N_GSM is not set
# CONFIG_NULL_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_HW_RANDOM=y
CONFIG_UML_RANDOM=y
# CONFIG_NSC_GPIO is not set
CONFIG_DEVMEM=y
CONFIG_RANDOM_TRUST_CPU=y
CONFIG_RANDOM_TRUST_BOOTLOADER=y
# end of Character devices

#
# I2C support
#
# CONFIG_I2C is not set
# end of I2C support

# CONFIG_I3C is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set

#
# CEC support
#
# CONFIG_MEDIA_CEC_SUPPORT is not set
# end of CEC support

#
# Graphics support
#
# end of Graphics support

CONFIG_SOUND_OSS_CORE_PRECLAIM=y

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_CMEDIA is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
CONFIG_HID_ITE=y
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
CONFIG_HID_REDRAGON=y
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_ALPS is not set
# end of Special HID drivers
# end of HID support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set

#
# DMABUF options
#
# CONFIG_SYNC_FILE is not set
# CONFIG_DMABUF_HEAPS is not set
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
CONFIG_VIRTIO_MENU=y
# CONFIG_VDPA is not set
CONFIG_VHOST_MENU=y
# CONFIG_VHOST_NET is not set
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_COMMON_CLK is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
# end of Clock Source drivers

# CONFIG_MAILBOX is not set
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# end of Generic IOMMU Pagetable Support

#
# Remoteproc drivers
#
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# end of Rpmsg drivers

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
# end of IRQ chip support

# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# end of PHY drivers for Broadcom platforms
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_RAS is not set

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

# CONFIG_DAX is not set
# CONFIG_NVMEM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
# CONFIG_F2FS_FS is not set
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_AUTOFS_FS=m
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
# CONFIG_UDF_FS is not set
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EXFAT_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS3_FS is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
# CONFIG_PROC_CHILDREN is not set
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_MEMFD_CREATE=y
# CONFIG_CONFIGFS_FS is not set
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
# CONFIG_CIFS is not set
# CONFIG_SMB_SERVER is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
# CONFIG_HARDENED_USERCOPY is not set
# CONFIG_FORTIFY_SOURCE is not set
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="landlock,lockdown,yama,loadpin,safesetid,integrity,bpf"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_INIT_STACK_NONE=y
# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
# CONFIG_ZERO_CALL_USED_REGS is not set
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# CONFIG_RANDSTRUCT_FULL is not set
# CONFIG_RANDSTRUCT_PERFORMANCE is not set
# end of Kernel hardening options
# end of Security options

CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# end of Crypto core or helper

#
# Public-key cryptography
#
# CONFIG_CRYPTO_RSA is not set
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography

#
# Block ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
# CONFIG_CRYPTO_ADIANTUM is not set
# CONFIG_CRYPTO_CHACHA20 is not set
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CFB is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_ECHAINIV is not set
# CONFIG_CRYPTO_ESSIV is not set
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
# CONFIG_CRYPTO_BLAKE2B is not set
# CONFIG_CRYPTO_CMAC is not set
# CONFIG_CRYPTO_GHASH is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_POLY1305 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_VMAC is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_XXHASH is not set
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
# CONFIG_CRYPTO_CRCT10DIF is not set
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set
# end of Compression

#
# Random number generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_DRBG_MENU is not set
# CONFIG_CRYPTO_JITTERENTROPY is not set
# end of Random number generation

#
# Userspace interface
#
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
# end of Userspace interface

CONFIG_CRYPTO_HW=y

#
# Certificates for signature checking
#
# end of Certificates for signature checking

#
# Library routines
#
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_ARCH_HAS_STRNCPY_FROM_USER=y
CONFIG_ARCH_HAS_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
# CONFIG_CRYPTO_LIB_CHACHA is not set
# CONFIG_CRYPTO_LIB_CURVE25519 is not set
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=1
# CONFIG_CRYPTO_LIB_POLY1305 is not set
# CONFIG_CRYPTO_LIB_CHACHA20POLY1305 is not set
CONFIG_CRYPTO_LIB_SHA1=y
# end of Crypto library routines

# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=y
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC64_ROCKSOFT is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC64 is not set
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_CRC8 is not set
# CONFIG_RANDOM32_SELFTEST is not set
# CONFIG_XZ_DEC is not set
CONFIG_NO_DMA=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_DQL=y
CONFIG_NLATTR=y
# CONFIG_IRQ_POLL is not set
CONFIG_SBITMAP=y
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_MISC=y

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_INFO_COMPRESSED is not set
# CONFIG_DEBUG_INFO_SPLIT is not set
CONFIG_PAHOLE_HAS_SPLIT_BTF=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=1024
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
# CONFIG_DEBUG_FS is not set
# CONFIG_UBSAN is not set
CONFIG_HAVE_KCSAN_COMPILER=y
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# end of Memory Debugging

# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
# CONFIG_SOFTLOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
# end of Lock Debugging (spinlocks, mutexes, etc...)

# CONFIG_DEBUG_IRQFLAGS is not set
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_HAVE_DEBUG_BUGVERBOSE=y

#
# Debug kernel data structures
#
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PLIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_DEBUG_MAPLE_TREE is not set
# end of Debug kernel data structures

# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_LATENCYTOP is not set
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_OSNOISE_TRACER is not set
# CONFIG_TIMERLAT_TRACER is not set
# CONFIG_ENABLE_DEFAULT_TRACERS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SYNTH_EVENTS is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_SAMPLES is not set

#
# um Debugging
#
# CONFIG_GPROF is not set
CONFIG_EARLY_PRINTK=y
# end of um Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
CONFIG_RUNTIME_TESTING_MENU=y
# CONFIG_TEST_MIN_HEAP is not set
# CONFIG_TEST_DIV64 is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_TEST_REF_TRACKER is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_REED_SOLOMON_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_HEXDUMP is not set
# CONFIG_STRING_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_STRSCPY is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_PRINTF is not set
# CONFIG_TEST_SCANF is not set
# CONFIG_TEST_BITMAP is not set
# CONFIG_TEST_UUID is not set
# CONFIG_TEST_XARRAY is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_TEST_SIPHASH is not set
# CONFIG_TEST_IDA is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_BITOPS is not set
# CONFIG_TEST_VMALLOC is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_BLACKHOLE_DEV is not set
# CONFIG_FIND_BIT_BENCHMARK is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_SYSCTL is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_TEST_STATIC_KEYS is not set
# CONFIG_TEST_KMOD is not set
# CONFIG_TEST_MEMCAT_P is not set
# CONFIG_TEST_MEMINIT is not set
# CONFIG_TEST_FREE_PAGES is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 4/7] mm/vmalloc: Use a trace_alloc_vmap_area event
  2022-10-17 19:12   ` kernel test robot
@ 2022-10-18 16:17     ` Uladzislau Rezki
  2022-10-18 16:44       ` Steven Rostedt
  0 siblings, 1 reply; 16+ messages in thread
From: Uladzislau Rezki @ 2022-10-18 16:17 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Uladzislau Rezki (Sony), Andrew Morton, kbuild-all,
	Linux Memory Management List, LKML, Christoph Hellwig,
	Matthew Wilcox, Nicholas Piggin, Oleksiy Avramchenko,
	Steven Rostedt

Hello, Steven.

> 
> [auto build test ERROR on akpm-mm/mm-everything]
> [also build test ERROR on linus/master v6.1-rc1 next-20221017]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch#_base_tree_information]
> 
> url:    https://github.com/intel-lab-lkp/linux/commits/Uladzislau-Rezki-Sony/Add-basic-trace-events-for-vmap-vmalloc/20221018-000544
> base:   https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-everything
> patch link:    https://lore.kernel.org/r/20221017160233.16582-7-urezki%40gmail.com
> patch subject: [PATCH 4/7] mm/vmalloc: Use a trace_alloc_vmap_area event
> config: um-i386_defconfig
> compiler: gcc-11 (Debian 11.3.0-8) 11.3.0
> reproduce (this is a W=1 build):
>         # https://github.com/intel-lab-lkp/linux/commit/fbc853c689b29d3bb9fe250b2653fd2dd8046fc7
>         git remote add linux-review https://github.com/intel-lab-lkp/linux
>         git fetch --no-tags linux-review Uladzislau-Rezki-Sony/Add-basic-trace-events-for-vmap-vmalloc/20221018-000544
>         git checkout fbc853c689b29d3bb9fe250b2653fd2dd8046fc7
>         # save the config file
>         mkdir build_dir && cp config build_dir/.config
>         make W=1 O=build_dir ARCH=um SUBARCH=i386 SHELL=/bin/bash
> 
> If you fix the issue, kindly add following tag where applicable
> | Reported-by: kernel test robot <lkp@intel.com>
> 
> All errors (new ones prefixed by >>):
> 
>    In file included from include/trace/events/vmap.h:123,
>                     from mm/vmalloc.c:47:
> >> include/trace/define_trace.h:84:34: fatal error: trace/events/kernel_vmap.h: No such file or directory
>       84 | # define __TRACE_INCLUDE(system) <trace/events/system.h>
>          |                                  ^
>    compilation terminated.
>
I can reproduce it. It seems it happens so far only on the ARCH=um case.
For regular arm/x86 i do not see such build error.

If i rename the TRACE_SYSTEM macro to something different then "vmap"
it compiles fine. In case of:

#define TRACE_SYSTEM vmap

the prefix "kernel_" is added, thus the header name becomes as kernel_vmap.h

Steven can you give some indications? Or any thoughts about it?

Thank you in advance!

--
Uladzislau Rezki


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 4/7] mm/vmalloc: Use a trace_alloc_vmap_area event
  2022-10-18 16:17     ` Uladzislau Rezki
@ 2022-10-18 16:44       ` Steven Rostedt
  2022-10-18 16:55         ` Uladzislau Rezki
  0 siblings, 1 reply; 16+ messages in thread
From: Steven Rostedt @ 2022-10-18 16:44 UTC (permalink / raw)
  To: Uladzislau Rezki
  Cc: Andrew Morton, kbuild-all, Linux Memory Management List, LKML,
	Christoph Hellwig, Matthew Wilcox, Nicholas Piggin,
	Oleksiy Avramchenko

On Tue, 18 Oct 2022 18:17:55 +0200
Uladzislau Rezki <urezki@gmail.com> wrote:

> Hello, Steven.
> 
> > 
> > [auto build test ERROR on akpm-mm/mm-everything]
> > [also build test ERROR on linus/master v6.1-rc1 next-20221017]
> > [If your patch is applied to the wrong git tree, kindly drop us a note.
> > And when submitting patch, we suggest to use '--base' as documented in
> > https://git-scm.com/docs/git-format-patch#_base_tree_information]
> > 
> > url:    https://github.com/intel-lab-lkp/linux/commits/Uladzislau-Rezki-Sony/Add-basic-trace-events-for-vmap-vmalloc/20221018-000544
> > base:   https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-everything
> > patch link:    https://lore.kernel.org/r/20221017160233.16582-7-urezki%40gmail.com
> > patch subject: [PATCH 4/7] mm/vmalloc: Use a trace_alloc_vmap_area event
> > config: um-i386_defconfig
> > compiler: gcc-11 (Debian 11.3.0-8) 11.3.0
> > reproduce (this is a W=1 build):
> >         # https://github.com/intel-lab-lkp/linux/commit/fbc853c689b29d3bb9fe250b2653fd2dd8046fc7
> >         git remote add linux-review https://github.com/intel-lab-lkp/linux
> >         git fetch --no-tags linux-review Uladzislau-Rezki-Sony/Add-basic-trace-events-for-vmap-vmalloc/20221018-000544
> >         git checkout fbc853c689b29d3bb9fe250b2653fd2dd8046fc7
> >         # save the config file
> >         mkdir build_dir && cp config build_dir/.config
> >         make W=1 O=build_dir ARCH=um SUBARCH=i386 SHELL=/bin/bash
> > 
> > If you fix the issue, kindly add following tag where applicable
> > | Reported-by: kernel test robot <lkp@intel.com>
> > 
> > All errors (new ones prefixed by >>):
> > 
> >    In file included from include/trace/events/vmap.h:123,
> >                     from mm/vmalloc.c:47:  
> > >> include/trace/define_trace.h:84:34: fatal error: trace/events/kernel_vmap.h: No such file or directory  
> >       84 | # define __TRACE_INCLUDE(system) <trace/events/system.h>
> >          |                                  ^
> >    compilation terminated.
> >  
> I can reproduce it. It seems it happens so far only on the ARCH=um case.
> For regular arm/x86 i do not see such build error.
> 
> If i rename the TRACE_SYSTEM macro to something different then "vmap"
> it compiles fine. In case of:
> 
> #define TRACE_SYSTEM vmap
> 
> the prefix "kernel_" is added, thus the header name becomes as kernel_vmap.h
> 
> Steven can you give some indications? Or any thoughts about it?
> 
> Thank you in advance!

It comes from this:

   arch/um/Makefile:# -Dvmap=kernel_vmap prevents anything from referencing the libpcap.o symbol so
   arch/um/Makefile:       $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap      \


It defines "vmap" to "kernel_vmap" which will change the above
TRACE_SYSTEM Define to:

  #define TRACE_SYSTEM kernel_vmap

and that will confuse everything else.

-- Steve


> 
> --
> Uladzislau Rezki



^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: [PATCH 4/7] mm/vmalloc: Use a trace_alloc_vmap_area event
  2022-10-18 16:44       ` Steven Rostedt
@ 2022-10-18 16:55         ` Uladzislau Rezki
  0 siblings, 0 replies; 16+ messages in thread
From: Uladzislau Rezki @ 2022-10-18 16:55 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Uladzislau Rezki, Andrew Morton, kbuild-all,
	Linux Memory Management List, LKML, Christoph Hellwig,
	Matthew Wilcox, Nicholas Piggin, Oleksiy Avramchenko

On Tue, Oct 18, 2022 at 12:44:12PM -0400, Steven Rostedt wrote:
> On Tue, 18 Oct 2022 18:17:55 +0200
> Uladzislau Rezki <urezki@gmail.com> wrote:
> 
> > Hello, Steven.
> > 
> > > 
> > > [auto build test ERROR on akpm-mm/mm-everything]
> > > [also build test ERROR on linus/master v6.1-rc1 next-20221017]
> > > [If your patch is applied to the wrong git tree, kindly drop us a note.
> > > And when submitting patch, we suggest to use '--base' as documented in
> > > https://git-scm.com/docs/git-format-patch#_base_tree_information]
> > > 
> > > url:    https://github.com/intel-lab-lkp/linux/commits/Uladzislau-Rezki-Sony/Add-basic-trace-events-for-vmap-vmalloc/20221018-000544
> > > base:   https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-everything
> > > patch link:    https://lore.kernel.org/r/20221017160233.16582-7-urezki%40gmail.com
> > > patch subject: [PATCH 4/7] mm/vmalloc: Use a trace_alloc_vmap_area event
> > > config: um-i386_defconfig
> > > compiler: gcc-11 (Debian 11.3.0-8) 11.3.0
> > > reproduce (this is a W=1 build):
> > >         # https://github.com/intel-lab-lkp/linux/commit/fbc853c689b29d3bb9fe250b2653fd2dd8046fc7
> > >         git remote add linux-review https://github.com/intel-lab-lkp/linux
> > >         git fetch --no-tags linux-review Uladzislau-Rezki-Sony/Add-basic-trace-events-for-vmap-vmalloc/20221018-000544
> > >         git checkout fbc853c689b29d3bb9fe250b2653fd2dd8046fc7
> > >         # save the config file
> > >         mkdir build_dir && cp config build_dir/.config
> > >         make W=1 O=build_dir ARCH=um SUBARCH=i386 SHELL=/bin/bash
> > > 
> > > If you fix the issue, kindly add following tag where applicable
> > > | Reported-by: kernel test robot <lkp@intel.com>
> > > 
> > > All errors (new ones prefixed by >>):
> > > 
> > >    In file included from include/trace/events/vmap.h:123,
> > >                     from mm/vmalloc.c:47:  
> > > >> include/trace/define_trace.h:84:34: fatal error: trace/events/kernel_vmap.h: No such file or directory  
> > >       84 | # define __TRACE_INCLUDE(system) <trace/events/system.h>
> > >          |                                  ^
> > >    compilation terminated.
> > >  
> > I can reproduce it. It seems it happens so far only on the ARCH=um case.
> > For regular arm/x86 i do not see such build error.
> > 
> > If i rename the TRACE_SYSTEM macro to something different then "vmap"
> > it compiles fine. In case of:
> > 
> > #define TRACE_SYSTEM vmap
> > 
> > the prefix "kernel_" is added, thus the header name becomes as kernel_vmap.h
> > 
> > Steven can you give some indications? Or any thoughts about it?
> > 
> > Thank you in advance!
> 
> It comes from this:
> 
>    arch/um/Makefile:# -Dvmap=kernel_vmap prevents anything from referencing the libpcap.o symbol so
>    arch/um/Makefile:       $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap      \
> 
> 
> It defines "vmap" to "kernel_vmap" which will change the above
> TRACE_SYSTEM Define to:
> 
>   #define TRACE_SYSTEM kernel_vmap
> 
> and that will confuse everything else.
> 
Hm... Right then it goes completely crazy. So there is only one option
it is to rename the trace header defined by the TRACE_SYSTEM.

Thank you for your help :)

--
Uladzislau Rezki


^ permalink raw reply	[flat|nested] 16+ messages in thread

* [PATCH 5/7] mm/vmalloc: Use a trace_purge_vmap_area_lazy event
  2022-10-17 16:02 [PATCH 0/7] Add basic trace events for vmap/vmalloc Uladzislau Rezki (Sony)
                   ` (5 preceding siblings ...)
  2022-10-17 16:02 ` [PATCH 4/7] mm/vmalloc: Use a trace_alloc_vmap_area event Uladzislau Rezki (Sony)
@ 2022-10-17 16:02 ` Uladzislau Rezki (Sony)
  2022-10-17 16:02 ` [PATCH 6/7] mm/vmalloc: Use a trace_free_vmap_area_noflush event Uladzislau Rezki (Sony)
  2022-10-17 16:02 ` [PATCH 7/7] vmalloc: Add reviewers for vmalloc code Uladzislau Rezki (Sony)
  8 siblings, 0 replies; 16+ messages in thread
From: Uladzislau Rezki (Sony) @ 2022-10-17 16:02 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-mm, LKML, Christoph Hellwig, Matthew Wilcox,
	Nicholas Piggin, Uladzislau Rezki, Oleksiy Avramchenko,
	Steven Rostedt

This is for debug purpose and is called when all outstanding
areas are removed back to the vmap space. It gives some extra
information about:
- a start:end range where set of vmap ares were freed;
- a number of purged areas which were backed off.

Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
---
 mm/vmalloc.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index f4397817ccd7..912abcd6e8b4 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1731,6 +1731,7 @@ static void purge_fragmented_blocks_allcpus(void);
 static bool __purge_vmap_area_lazy(unsigned long start, unsigned long end)
 {
 	unsigned long resched_threshold;
+	unsigned int num_purged_areas = 0;
 	struct list_head local_purge_list;
 	struct vmap_area *va, *n_va;
 
@@ -1742,7 +1743,7 @@ static bool __purge_vmap_area_lazy(unsigned long start, unsigned long end)
 	spin_unlock(&purge_vmap_area_lock);
 
 	if (unlikely(list_empty(&local_purge_list)))
-		return false;
+		goto out;
 
 	start = min(start,
 		list_first_entry(&local_purge_list,
@@ -1777,12 +1778,16 @@ static bool __purge_vmap_area_lazy(unsigned long start, unsigned long end)
 					      va->va_start, va->va_end);
 
 		atomic_long_sub(nr, &vmap_lazy_nr);
+		num_purged_areas++;
 
 		if (atomic_long_read(&vmap_lazy_nr) < resched_threshold)
 			cond_resched_lock(&free_vmap_area_lock);
 	}
 	spin_unlock(&free_vmap_area_lock);
-	return true;
+
+out:
+	trace_purge_vmap_area_lazy(start, end, num_purged_areas);
+	return num_purged_areas > 0 ? true:false;
 }
 
 /*
-- 
2.30.2



^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 6/7] mm/vmalloc: Use a trace_free_vmap_area_noflush event
  2022-10-17 16:02 [PATCH 0/7] Add basic trace events for vmap/vmalloc Uladzislau Rezki (Sony)
                   ` (6 preceding siblings ...)
  2022-10-17 16:02 ` [PATCH 5/7] mm/vmalloc: Use a trace_purge_vmap_area_lazy event Uladzislau Rezki (Sony)
@ 2022-10-17 16:02 ` Uladzislau Rezki (Sony)
  2022-10-17 16:02 ` [PATCH 7/7] vmalloc: Add reviewers for vmalloc code Uladzislau Rezki (Sony)
  8 siblings, 0 replies; 16+ messages in thread
From: Uladzislau Rezki (Sony) @ 2022-10-17 16:02 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-mm, LKML, Christoph Hellwig, Matthew Wilcox,
	Nicholas Piggin, Uladzislau Rezki, Oleksiy Avramchenko,
	Steven Rostedt

It is for a debug purpose and is called when a vmap area
gets freed. This event gives some indication about:
- a start address of released area;
- a current number of outstanding pages;
- a maximum number of allowed outstanding pages.

Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
---
 mm/vmalloc.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 912abcd6e8b4..df4fd6674ced 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -1822,6 +1822,8 @@ static void drain_vmap_area_work(struct work_struct *work)
  */
 static void free_vmap_area_noflush(struct vmap_area *va)
 {
+	unsigned long nr_lazy_max = lazy_max_pages();
+	unsigned long va_start = va->va_start;
 	unsigned long nr_lazy;
 
 	spin_lock(&vmap_area_lock);
@@ -1839,8 +1841,10 @@ static void free_vmap_area_noflush(struct vmap_area *va)
 		&purge_vmap_area_root, &purge_vmap_area_list);
 	spin_unlock(&purge_vmap_area_lock);
 
+	trace_free_vmap_area_noflush(va_start, nr_lazy, nr_lazy_max);
+
 	/* After this point, we may free va at any time */
-	if (unlikely(nr_lazy > lazy_max_pages()))
+	if (unlikely(nr_lazy > nr_lazy_max))
 		schedule_work(&drain_vmap_work);
 }
 
-- 
2.30.2



^ permalink raw reply related	[flat|nested] 16+ messages in thread

* [PATCH 7/7] vmalloc: Add reviewers for vmalloc code
  2022-10-17 16:02 [PATCH 0/7] Add basic trace events for vmap/vmalloc Uladzislau Rezki (Sony)
                   ` (7 preceding siblings ...)
  2022-10-17 16:02 ` [PATCH 6/7] mm/vmalloc: Use a trace_free_vmap_area_noflush event Uladzislau Rezki (Sony)
@ 2022-10-17 16:02 ` Uladzislau Rezki (Sony)
  8 siblings, 0 replies; 16+ messages in thread
From: Uladzislau Rezki (Sony) @ 2022-10-17 16:02 UTC (permalink / raw)
  To: Andrew Morton
  Cc: linux-mm, LKML, Christoph Hellwig, Matthew Wilcox,
	Nicholas Piggin, Uladzislau Rezki, Oleksiy Avramchenko,
	Steven Rostedt

Add myself and Christoph Hellwig as reviewers for vmalloc.

Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
---
 MAINTAINERS | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 568ad7c5eeb6..a6f4e11755e6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13289,10 +13289,20 @@ F:	include/linux/memory_hotplug.h
 F:	include/linux/mm.h
 F:	include/linux/mmzone.h
 F:	include/linux/pagewalk.h
-F:	include/linux/vmalloc.h
 F:	mm/
 F:	tools/testing/selftests/vm/
 
+VMALLOC
+M:	Andrew Morton <akpm@linux-foundation.org>
+R:	Uladzislau Rezki <urezki@gmail.com>
+R:	Christoph Hellwig <hch@infradead.org>
+L:	linux-mm@kvack.org
+S:	Maintained
+W:	http://www.linux-mm.org
+T:	git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
+F:	mm/vmalloc.c
+F:	include/linux/vmalloc.h
+
 MEMORY HOT(UN)PLUG
 M:	David Hildenbrand <david@redhat.com>
 M:	Oscar Salvador <osalvador@suse.de>
-- 
2.30.2



^ permalink raw reply related	[flat|nested] 16+ messages in thread

end of thread, other threads:[~2022-10-18 16:57 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2022-10-17 16:02 [PATCH 0/7] Add basic trace events for vmap/vmalloc Uladzislau Rezki (Sony)
2022-10-17 16:02 ` [PATCH 1/7] mm: vmap: Add alloc_vmap_area trace event Uladzislau Rezki (Sony)
2022-10-18 16:41   ` Steven Rostedt
2022-10-18 16:57     ` Uladzislau Rezki
2022-10-17 16:02 ` [PATCH 2/7] mm: vmap: Add a purge_vmap_area_lazy " Uladzislau Rezki (Sony)
2022-10-17 16:02 ` [PATCH 2/7] mm: vmap: Add " Uladzislau Rezki (Sony)
2022-10-17 16:02 ` [PATCH 3/7] mm: vmap: Add a free_vmap_area_noflush " Uladzislau Rezki (Sony)
2022-10-17 16:02 ` [PATCH 3/7] mm: vmap: Add " Uladzislau Rezki (Sony)
2022-10-17 16:02 ` [PATCH 4/7] mm/vmalloc: Use a trace_alloc_vmap_area event Uladzislau Rezki (Sony)
2022-10-17 19:12   ` kernel test robot
2022-10-18 16:17     ` Uladzislau Rezki
2022-10-18 16:44       ` Steven Rostedt
2022-10-18 16:55         ` Uladzislau Rezki
2022-10-17 16:02 ` [PATCH 5/7] mm/vmalloc: Use a trace_purge_vmap_area_lazy event Uladzislau Rezki (Sony)
2022-10-17 16:02 ` [PATCH 6/7] mm/vmalloc: Use a trace_free_vmap_area_noflush event Uladzislau Rezki (Sony)
2022-10-17 16:02 ` [PATCH 7/7] vmalloc: Add reviewers for vmalloc code Uladzislau Rezki (Sony)

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).