From: Mel Gorman <mgorman@techsingularity.net>
To: Linux-MM <linux-mm@kvack.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Michal Hocko <mhocko@suse.com>, NeilBrown <neilb@suse.de>,
Thierry Reding <thierry.reding@gmail.com>,
Matthew Wilcox <willy@infradead.org>,
Vlastimil Babka <vbabka@suse.cz>,
LKML <linux-kernel@vger.kernel.org>,
Mel Gorman <mgorman@techsingularity.net>
Subject: [PATCH 3/6] mm/page_alloc: Explicitly record high-order atomic allocations in alloc_flags
Date: Tue, 29 Nov 2022 15:16:58 +0000 [thread overview]
Message-ID: <20221129151701.23261-4-mgorman@techsingularity.net> (raw)
In-Reply-To: <20221129151701.23261-1-mgorman@techsingularity.net>
A high-order ALLOC_HARDER allocation is assumed to be atomic. While that
is accurate, it changes later in the series. In preparation, explicitly
record high-order atomic allocations in gfp_to_alloc_flags().
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
---
mm/internal.h | 1 +
mm/page_alloc.c | 19 +++++++++++++------
2 files changed, 14 insertions(+), 6 deletions(-)
diff --git a/mm/internal.h b/mm/internal.h
index d503e57a57a1..9a9d9b5ee87f 100644
--- a/mm/internal.h
+++ b/mm/internal.h
@@ -754,6 +754,7 @@ unsigned int reclaim_clean_pages_from_list(struct zone *zone,
#else
#define ALLOC_NOFRAGMENT 0x0
#endif
+#define ALLOC_HIGHATOMIC 0x200 /* Allows access to MIGRATE_HIGHATOMIC */
#define ALLOC_KSWAPD 0x800 /* allow waking of kswapd, __GFP_KSWAPD_RECLAIM set */
enum ttu_flags;
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index da746e9eb2cf..e2b65767dda0 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -3710,7 +3710,7 @@ struct page *rmqueue_buddy(struct zone *preferred_zone, struct zone *zone,
* reserved for high-order atomic allocation, so order-0
* request should skip it.
*/
- if (order > 0 && alloc_flags & ALLOC_HARDER)
+ if (alloc_flags & ALLOC_HIGHATOMIC)
page = __rmqueue_smallest(zone, order, MIGRATE_HIGHATOMIC);
if (!page) {
page = __rmqueue(zone, order, migratetype, alloc_flags);
@@ -4028,8 +4028,10 @@ bool __zone_watermark_ok(struct zone *z, unsigned int order, unsigned long mark,
return true;
}
#endif
- if (alloc_harder && !free_area_empty(area, MIGRATE_HIGHATOMIC))
+ if ((alloc_flags & ALLOC_HIGHATOMIC) &&
+ !free_area_empty(area, MIGRATE_HIGHATOMIC)) {
return true;
+ }
}
return false;
}
@@ -4291,7 +4293,7 @@ get_page_from_freelist(gfp_t gfp_mask, unsigned int order, int alloc_flags,
* If this is a high-order atomic allocation then check
* if the pageblock should be reserved for the future
*/
- if (unlikely(order && (alloc_flags & ALLOC_HARDER)))
+ if (unlikely(alloc_flags & ALLOC_HIGHATOMIC))
reserve_highatomic_pageblock(page, zone, order);
return page;
@@ -4818,7 +4820,7 @@ static void wake_all_kswapds(unsigned int order, gfp_t gfp_mask,
}
static inline unsigned int
-gfp_to_alloc_flags(gfp_t gfp_mask)
+gfp_to_alloc_flags(gfp_t gfp_mask, unsigned int order)
{
unsigned int alloc_flags = ALLOC_WMARK_MIN | ALLOC_CPUSET;
@@ -4844,8 +4846,13 @@ gfp_to_alloc_flags(gfp_t gfp_mask)
* Not worth trying to allocate harder for __GFP_NOMEMALLOC even
* if it can't schedule.
*/
- if (!(gfp_mask & __GFP_NOMEMALLOC))
+ if (!(gfp_mask & __GFP_NOMEMALLOC)) {
alloc_flags |= ALLOC_HARDER;
+
+ if (order > 0)
+ alloc_flags |= ALLOC_HIGHATOMIC;
+ }
+
/*
* Ignore cpuset mems for GFP_ATOMIC rather than fail, see the
* comment for __cpuset_node_allowed().
@@ -5053,7 +5060,7 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
* kswapd needs to be woken up, and to avoid the cost of setting up
* alloc_flags precisely. So we do that now.
*/
- alloc_flags = gfp_to_alloc_flags(gfp_mask);
+ alloc_flags = gfp_to_alloc_flags(gfp_mask, order);
/*
* We need to recalculate the starting point for the zonelist iterator
--
2.35.3
next prev parent reply other threads:[~2022-11-29 15:17 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-11-29 15:16 [RFC PATCH 0/6] Discard __GFP_ATOMIC Mel Gorman
2022-11-29 15:16 ` [PATCH 1/6] mm/page_alloc: Rename ALLOC_HIGH to ALLOC_MIN_RESERVE Mel Gorman
2022-12-08 16:12 ` Vlastimil Babka
2022-11-29 15:16 ` [PATCH 2/6] mm/page_alloc: Treat RT tasks similar to GFP_HIGH Mel Gorman
2022-12-08 16:16 ` Vlastimil Babka
2022-11-29 15:16 ` Mel Gorman [this message]
2022-12-05 5:17 ` [PATCH 3/6] mm/page_alloc: Explicitly record high-order atomic allocations in alloc_flags NeilBrown
2022-12-05 10:27 ` Mel Gorman
2022-12-08 16:51 ` Vlastimil Babka
2023-01-04 11:45 ` Mel Gorman
2022-11-29 15:16 ` [PATCH 4/6] mm/page_alloc: Explicitly define what alloc flags deplete min reserves Mel Gorman
2022-12-08 17:55 ` Vlastimil Babka
2023-01-04 12:02 ` Mel Gorman
2022-11-29 15:17 ` [PATCH 5/6] mm/page_alloc: Give GFP_ATOMIC and non-blocking allocations access to reserves Mel Gorman
2022-12-08 18:07 ` Vlastimil Babka
2023-01-04 12:03 ` Mel Gorman
2022-11-29 15:17 ` [PATCH 6/6] mm: discard __GFP_ATOMIC Mel Gorman
2022-12-08 18:17 ` Vlastimil Babka
2023-01-04 12:04 ` Mel Gorman
2023-01-05 13:49 ` Mike Rapoport
2023-01-05 21:53 ` NeilBrown
2023-01-06 9:35 ` Mel Gorman
2023-01-08 9:30 ` Mike Rapoport
-- strict thread matches above, loose matches on Subject: below --
2023-01-13 11:12 [PATCH 0/6 v3] Discard __GFP_ATOMIC Mel Gorman
2023-01-13 11:12 ` [PATCH 3/6] mm/page_alloc: Explicitly record high-order atomic allocations in alloc_flags Mel Gorman
2023-01-13 13:02 ` Michal Hocko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221129151701.23261-4-mgorman@techsingularity.net \
--to=mgorman@techsingularity.net \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mhocko@suse.com \
--cc=neilb@suse.de \
--cc=thierry.reding@gmail.com \
--cc=vbabka@suse.cz \
--cc=willy@infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).