From: Eric DeVolder <eric.devolder@oracle.com>
To: linux-kernel@vger.kernel.org, david@redhat.com,
osalvador@suse.de, corbet@lwn.net, tglx@linutronix.de,
mingo@redhat.com, bp@alien8.de, dave.hansen@linux.intel.com,
x86@kernel.org, bhe@redhat.com, ebiederm@xmission.com,
kexec@lists.infradead.org
Cc: hpa@zytor.com, gregkh@linuxfoundation.org, rafael@kernel.org,
vgoyal@redhat.com, dyoung@redhat.com, lf32.dev@gmail.com,
akpm@linux-foundation.org, naveen.n.rao@linux.vnet.ibm.com,
zohar@linux.ibm.com, bhelgaas@google.com, vbabka@suse.cz,
tiwai@suse.de, seanjc@google.com, linux@weissschuh.net,
vschneid@redhat.com, linux-mm@kvack.org,
linux-doc@vger.kernel.org, sourabhjain@linux.ibm.com,
konrad.wilk@oracle.com, boris.ostrovsky@oracle.com,
eric.devolder@oracle.com
Subject: [PATCH v25 07/10] x86/crash: add x86 crash hotplug support
Date: Thu, 29 Jun 2023 15:21:16 -0400 [thread overview]
Message-ID: <20230629192119.6613-8-eric.devolder@oracle.com> (raw)
In-Reply-To: <20230629192119.6613-1-eric.devolder@oracle.com>
When CPU or memory is hot un/plugged, or off/onlined, the crash
elfcorehdr, which describes the CPUs and memory in the system,
must also be updated.
A new elfcorehdr is generated from the available CPUs and memory
and replaces the existing elfcorehdr. The segment containing the
elfcorehdr is identified at run-time in
crash_core:crash_handle_hotplug_event().
No modifications to purgatory (see 'kexec: exclude elfcorehdr
from the segment digest') or boot_params (as the elfcorehdr=
capture kernel command line parameter pointer remains unchanged
and correct) are needed, just elfcorehdr.
For kexec_file_load(), the elfcorehdr segment size is based on
NR_CPUS and CRASH_MAX_MEMORY_RANGES in order to accommodate a
growing number of CPU and memory resources.
For kexec_load(), the userspace kexec utility needs to size the
elfcorehdr segment in the same/similar manner.
To accommodate kexec_load() syscall in the absence of
kexec_file_load() syscall support, prepare_elf_headers() and
dependents are moved outside of CONFIG_KEXEC_FILE.
Signed-off-by: Eric DeVolder <eric.devolder@oracle.com>
Reviewed-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
---
arch/x86/Kconfig | 3 +
arch/x86/include/asm/kexec.h | 15 +++++
arch/x86/kernel/crash.c | 103 ++++++++++++++++++++++++++++++++---
3 files changed, 114 insertions(+), 7 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 06a4472d0fc0..42c083da7ce4 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2058,6 +2058,9 @@ config ARCH_SUPPORTS_KEXEC_JUMP
config ARCH_SUPPORTS_CRASH_DUMP
def_bool X86_64 || (X86_32 && HIGHMEM)
+config ARCH_SUPPORTS_CRASH_HOTPLUG
+ def_bool y
+
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if (EXPERT || CRASH_DUMP)
default "0x1000000"
diff --git a/arch/x86/include/asm/kexec.h b/arch/x86/include/asm/kexec.h
index 5b77bbc28f96..9143100ea3ea 100644
--- a/arch/x86/include/asm/kexec.h
+++ b/arch/x86/include/asm/kexec.h
@@ -209,6 +209,21 @@ typedef void crash_vmclear_fn(void);
extern crash_vmclear_fn __rcu *crash_vmclear_loaded_vmcss;
extern void kdump_nmi_shootdown_cpus(void);
+#ifdef CONFIG_CRASH_HOTPLUG
+void arch_crash_handle_hotplug_event(struct kimage *image);
+#define arch_crash_handle_hotplug_event arch_crash_handle_hotplug_event
+
+#ifdef CONFIG_HOTPLUG_CPU
+static inline int crash_hotplug_cpu_support(void) { return 1; }
+#define crash_hotplug_cpu_support crash_hotplug_cpu_support
+#endif
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+static inline int crash_hotplug_memory_support(void) { return 1; }
+#define crash_hotplug_memory_support crash_hotplug_memory_support
+#endif
+#endif
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_X86_KEXEC_H */
diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c
index cdd92ab43cda..c70a111c44fa 100644
--- a/arch/x86/kernel/crash.c
+++ b/arch/x86/kernel/crash.c
@@ -158,8 +158,6 @@ void native_machine_crash_shutdown(struct pt_regs *regs)
crash_save_cpu(regs, safe_smp_processor_id());
}
-#ifdef CONFIG_KEXEC_FILE
-
static int get_nr_ram_ranges_callback(struct resource *res, void *arg)
{
unsigned int *nr_ranges = arg;
@@ -231,7 +229,7 @@ static int prepare_elf64_ram_headers_callback(struct resource *res, void *arg)
/* Prepare elf headers. Return addr and size */
static int prepare_elf_headers(struct kimage *image, void **addr,
- unsigned long *sz)
+ unsigned long *sz, unsigned long *nr_mem_ranges)
{
struct crash_mem *cmem;
int ret;
@@ -249,6 +247,9 @@ static int prepare_elf_headers(struct kimage *image, void **addr,
if (ret)
goto out;
+ /* Return the computed number of memory ranges, for hotplug usage */
+ *nr_mem_ranges = cmem->nr_ranges;
+
/* By default prepare 64bit headers */
ret = crash_prepare_elf64_headers(cmem, IS_ENABLED(CONFIG_X86_64), addr, sz);
@@ -257,6 +258,7 @@ static int prepare_elf_headers(struct kimage *image, void **addr,
return ret;
}
+#ifdef CONFIG_KEXEC_FILE
static int add_e820_entry(struct boot_params *params, struct e820_entry *entry)
{
unsigned int nr_e820_entries;
@@ -371,18 +373,42 @@ int crash_setup_memmap_entries(struct kimage *image, struct boot_params *params)
int crash_load_segments(struct kimage *image)
{
int ret;
+ unsigned long pnum = 0;
struct kexec_buf kbuf = { .image = image, .buf_min = 0,
.buf_max = ULONG_MAX, .top_down = false };
/* Prepare elf headers and add a segment */
- ret = prepare_elf_headers(image, &kbuf.buffer, &kbuf.bufsz);
+ ret = prepare_elf_headers(image, &kbuf.buffer, &kbuf.bufsz, &pnum);
if (ret)
return ret;
- image->elf_headers = kbuf.buffer;
- image->elf_headers_sz = kbuf.bufsz;
+ image->elf_headers = kbuf.buffer;
+ image->elf_headers_sz = kbuf.bufsz;
+ kbuf.memsz = kbuf.bufsz;
+
+#ifdef CONFIG_CRASH_HOTPLUG
+ /*
+ * The elfcorehdr segment size accounts for VMCOREINFO, kernel_map,
+ * maximum CPUs and maximum memory ranges.
+ */
+ if (IS_ENABLED(CONFIG_MEMORY_HOTPLUG))
+ pnum = 2 + CONFIG_NR_CPUS_DEFAULT + CONFIG_CRASH_MAX_MEMORY_RANGES;
+ else
+ pnum += 2 + CONFIG_NR_CPUS_DEFAULT;
+
+ if (pnum < (unsigned long)PN_XNUM) {
+ kbuf.memsz = pnum * sizeof(Elf64_Phdr);
+ kbuf.memsz += sizeof(Elf64_Ehdr);
+
+ image->elfcorehdr_index = image->nr_segments;
+
+ /* Mark as usable to crash kernel, else crash kernel fails on boot */
+ image->elf_headers_sz = kbuf.memsz;
+ } else {
+ pr_err("number of Phdrs %lu exceeds max\n", pnum);
+ }
+#endif
- kbuf.memsz = kbuf.bufsz;
kbuf.buf_align = ELF_CORE_HEADER_ALIGN;
kbuf.mem = KEXEC_BUF_MEM_UNKNOWN;
ret = kexec_add_buffer(&kbuf);
@@ -395,3 +421,66 @@ int crash_load_segments(struct kimage *image)
return ret;
}
#endif /* CONFIG_KEXEC_FILE */
+
+#ifdef CONFIG_CRASH_HOTPLUG
+
+#undef pr_fmt
+#define pr_fmt(fmt) "crash hp: " fmt
+
+/**
+ * arch_crash_handle_hotplug_event() - Handle hotplug elfcorehdr changes
+ * @image: a pointer to kexec_crash_image
+ *
+ * Prepare the new elfcorehdr and replace the existing elfcorehdr.
+ */
+void arch_crash_handle_hotplug_event(struct kimage *image)
+{
+ void *elfbuf = NULL, *old_elfcorehdr;
+ unsigned long nr_mem_ranges;
+ unsigned long mem, memsz;
+ unsigned long elfsz = 0;
+
+ /*
+ * Create the new elfcorehdr reflecting the changes to CPU and/or
+ * memory resources.
+ */
+ if (prepare_elf_headers(image, &elfbuf, &elfsz, &nr_mem_ranges)) {
+ pr_err("unable to create new elfcorehdr");
+ goto out;
+ }
+
+ /*
+ * Obtain address and size of the elfcorehdr segment, and
+ * check it against the new elfcorehdr buffer.
+ */
+ mem = image->segment[image->elfcorehdr_index].mem;
+ memsz = image->segment[image->elfcorehdr_index].memsz;
+ if (elfsz > memsz) {
+ pr_err("update elfcorehdr elfsz %lu > memsz %lu",
+ elfsz, memsz);
+ goto out;
+ }
+
+ /*
+ * Copy new elfcorehdr over the old elfcorehdr at destination.
+ */
+ old_elfcorehdr = kmap_local_page(pfn_to_page(mem >> PAGE_SHIFT));
+ if (!old_elfcorehdr) {
+ pr_err("mapping elfcorehdr segment failed\n");
+ goto out;
+ }
+
+ /*
+ * Temporarily invalidate the crash image while the
+ * elfcorehdr is updated.
+ */
+ xchg(&kexec_crash_image, NULL);
+ memcpy_flushcache(old_elfcorehdr, elfbuf, elfsz);
+ xchg(&kexec_crash_image, image);
+ kunmap_local(old_elfcorehdr);
+ pr_debug("updated elfcorehdr\n");
+
+out:
+ vfree(elfbuf);
+}
+#endif
--
2.31.1
next prev parent reply other threads:[~2023-06-29 19:22 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-29 19:21 [PATCH v25 00/10] crash: Kernel handling of CPU and memory hot un/plug Eric DeVolder
2023-06-29 19:21 ` [PATCH v25 01/10] drivers/base: refactor cpu.c to use .is_visible() Eric DeVolder
2023-07-03 13:05 ` Greg KH
2023-07-03 16:53 ` Eric DeVolder
2023-07-21 16:32 ` Eric DeVolder
2023-08-03 18:20 ` Eric DeVolder
2023-08-03 18:36 ` Greg KH
2023-06-29 19:21 ` [PATCH v25 02/10] drivers/base: refactor memory.c " Eric DeVolder
2023-06-29 19:21 ` [PATCH v25 03/10] crash: move a few code bits to setup support of crash hotplug Eric DeVolder
2023-06-29 19:21 ` [PATCH v25 04/10] crash: add generic infrastructure for crash hotplug support Eric DeVolder
2023-06-29 19:21 ` [PATCH v25 05/10] kexec: exclude elfcorehdr from the segment digest Eric DeVolder
2023-06-29 19:21 ` [PATCH v25 06/10] crash: memory and CPU hotplug sysfs attributes Eric DeVolder
2023-06-29 20:59 ` Randy Dunlap
2023-06-29 22:31 ` Eric DeVolder
2023-06-29 23:20 ` Randy Dunlap
2023-07-03 13:07 ` Greg KH
2023-07-03 16:57 ` Eric DeVolder
2023-06-29 19:21 ` Eric DeVolder [this message]
2023-06-29 19:21 ` [PATCH v25 08/10] crash: hotplug support for kexec_load() Eric DeVolder
2023-06-29 19:21 ` [PATCH v25 09/10] crash: change crash_prepare_elf64_headers() to for_each_possible_cpu() Eric DeVolder
2023-06-29 19:21 ` [PATCH v25 10/10] x86/crash: optimize CPU changes Eric DeVolder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230629192119.6613-8-eric.devolder@oracle.com \
--to=eric.devolder@oracle.com \
--cc=akpm@linux-foundation.org \
--cc=bhe@redhat.com \
--cc=bhelgaas@google.com \
--cc=boris.ostrovsky@oracle.com \
--cc=bp@alien8.de \
--cc=corbet@lwn.net \
--cc=dave.hansen@linux.intel.com \
--cc=david@redhat.com \
--cc=dyoung@redhat.com \
--cc=ebiederm@xmission.com \
--cc=gregkh@linuxfoundation.org \
--cc=hpa@zytor.com \
--cc=kexec@lists.infradead.org \
--cc=konrad.wilk@oracle.com \
--cc=lf32.dev@gmail.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux@weissschuh.net \
--cc=mingo@redhat.com \
--cc=naveen.n.rao@linux.vnet.ibm.com \
--cc=osalvador@suse.de \
--cc=rafael@kernel.org \
--cc=seanjc@google.com \
--cc=sourabhjain@linux.ibm.com \
--cc=tglx@linutronix.de \
--cc=tiwai@suse.de \
--cc=vbabka@suse.cz \
--cc=vgoyal@redhat.com \
--cc=vschneid@redhat.com \
--cc=x86@kernel.org \
--cc=zohar@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).