From: Mike Rapoport <rppt@kernel.org>
To: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Wupeng Ma <mawupeng1@huawei.com>,
akpm@linux-foundation.org, linux-mm@kvack.org
Subject: Re: [PATCH] mm: disable kernelcore=mirror when no mirror memory
Date: Sun, 30 Jul 2023 09:53:53 +0300 [thread overview]
Message-ID: <20230730065353.GJ1901145@kernel.org> (raw)
In-Reply-To: <eb6eb25c-8e9c-123a-d6bc-4a69e99adbe1@huawei.com>
On Sat, Jul 29, 2023 at 04:57:17PM +0800, Kefeng Wang wrote:
>
>
> On 2023/7/29 16:12, Mike Rapoport wrote:
> > On Fri, Jul 28, 2023 at 12:01:24PM +0800, Wupeng Ma wrote:
> > > From: Ma Wupeng <mawupeng1@huawei.com>
> > >
> > > For system with kernelcore=mirror enabled while no mirrored memory is
> > > reported by efi. This could lead to kernel OOM during startup since
> > > all memory beside zone DMA are in the movable zone and this prevents
> > > the kernel to use it.
> > >
> > > Zone DMA/DMA32 initialization is independent of mirrored memory and
> > > their max pfn is set in zone_sizes_init(). Since kernel can fallback
> > > to zone DMA/DMA32 if there is no memory in zone Normal, these zones
> > > are seen as mirrored memory no mather their memory attributes are.
> >
> > Using kernelcore= and movablecore= always come with the risk there will be
> > to little memory for the kernel to use. Even if EFI reports mirrored memory
> > it's possible to have OOM with kernelcore=mirror because there could be
> > just not enough mirrored memory.
>
> Yes, this is a big problem, could we add an option to move some
> ZONE_MOVABLE pages into ZONE_NORMAL(MIGRATE_MOVABLE) when low free
> memory?>
> > > To solve this problem, disable kernelcore=mirror when there is no real
> > > mirrored memory exists.
> > >
> > > Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
> > > ---
> > > mm/internal.h | 2 ++
> > > mm/memblock.c | 2 +-
> > > mm/mm_init.c | 6 +++++-
> > > 3 files changed, 8 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/mm/internal.h b/mm/internal.h
> > > index a7d9e980429a..98a03ac74ca7 100644
> > > --- a/mm/internal.h
> > > +++ b/mm/internal.h
> > > @@ -374,6 +374,8 @@ static inline void clear_zone_contiguous(struct zone *zone)
> > > zone->contiguous = false;
> > > }
> > > +extern bool system_has_some_mirror;
> > > +
> > > extern int __isolate_free_page(struct page *page, unsigned int order);
> > > extern void __putback_isolated_page(struct page *page, unsigned int order,
> > > int mt);
> > > diff --git a/mm/memblock.c b/mm/memblock.c
> > > index f9e61e565a53..e7a7a65415fb 100644
> > > --- a/mm/memblock.c
> > > +++ b/mm/memblock.c
> > > @@ -156,10 +156,10 @@ static __refdata struct memblock_type *memblock_memory = &memblock.memory;
> > > } while (0)
> > > static int memblock_debug __initdata_memblock;
> > > -static bool system_has_some_mirror __initdata_memblock;
> > > static int memblock_can_resize __initdata_memblock;
> > > static int memblock_memory_in_slab __initdata_memblock;
> > > static int memblock_reserved_in_slab __initdata_memblock;
> > > +bool system_has_some_mirror __initdata_memblock;
> > > static enum memblock_flags __init_memblock choose_memblock_flags(void)
> > > {
> > > diff --git a/mm/mm_init.c b/mm/mm_init.c
> > > index a1963c3322af..6267b9f75927 100644
> > > --- a/mm/mm_init.c
> > > +++ b/mm/mm_init.c
> > > @@ -269,7 +269,11 @@ static int __init cmdline_parse_kernelcore(char *p)
> > > {
> > > /* parse kernelcore=mirror */
> > > if (parse_option_str(p, "mirror")) {
> > > - mirrored_kernelcore = true;
> > > + if (system_has_some_mirror)
> > > + mirrored_kernelcore = true;
> >
> > On many architectures early parameters are parsed before memblock is setup,
> > so system_has_some_mirror will always be true.
>
> Only x86/arm64 support kernelcore=mirror, system_has_some_mirror is
> false by default, so it should no issue for now, but it is better to
> move this check into find_zone_movable_pfns_for_nodes().
Sorry, I meant that system_has_some_mirror is false by default, and both
x86/arm64 parse early parameters before they set up memblock, so
system_has_some_mirror will be always false at this point.
> > > + else
> > > + pr_warn("The system has no mirror memory, disable kernelcore=mirror.\n");
> > > +
> > > return 0;
> > > }
> > > --
> > > 2.25.1
> > >
> >
--
Sincerely yours,
Mike.
next prev parent reply other threads:[~2023-07-30 6:54 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-28 4:01 [PATCH] mm: disable kernelcore=mirror when no mirror memory Wupeng Ma
2023-07-29 8:12 ` Mike Rapoport
2023-07-29 8:57 ` Kefeng Wang
2023-07-30 6:53 ` Mike Rapoport [this message]
2023-07-31 1:39 ` Kefeng Wang
2023-07-31 2:06 ` mawupeng
2023-08-01 14:05 ` Mike Rapoport
2023-07-31 1:39 ` mawupeng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230730065353.GJ1901145@kernel.org \
--to=rppt@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=linux-mm@kvack.org \
--cc=mawupeng1@huawei.com \
--cc=wangkefeng.wang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).