From: peterx@redhat.com
To: linux-kernel@vger.kernel.org, linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
x86@kernel.org, Muchun Song <muchun.song@linux.dev>,
Mike Rapoport <rppt@kernel.org>,
Matthew Wilcox <willy@infradead.org>,
sparclinux@vger.kernel.org, Jason Gunthorpe <jgg@nvidia.com>,
linuxppc-dev@lists.ozlabs.org,
Christophe Leroy <christophe.leroy@csgroup.eu>,
linux-arm-kernel@lists.infradead.org, peterx@redhat.com,
Russell King <linux@armlinux.org.uk>,
Shawn Guo <shawnguo@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Bjorn Andersson <andersson@kernel.org>,
Arnd Bergmann <arnd@arndb.de>,
Konrad Dybcio <konrad.dybcio@linaro.org>,
Fabio Estevam <festevam@denx.de>
Subject: [PATCH v2 06/14] mm/arm: Use macros to define pmd/pud helpers
Date: Mon, 18 Mar 2024 16:03:56 -0400 [thread overview]
Message-ID: <20240318200404.448346-7-peterx@redhat.com> (raw)
In-Reply-To: <20240318200404.448346-1-peterx@redhat.com>
From: Peter Xu <peterx@redhat.com>
It's already confusing that ARM 2-level v.s. 3-level defines SECT bit
differently on pmd/puds. Always use a macro which is much clearer.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: Fabio Estevam <festevam@denx.de>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Peter Xu <peterx@redhat.com>
---
arch/arm/include/asm/pgtable-2level.h | 4 ++--
arch/arm/include/asm/pgtable-3level-hwdef.h | 1 +
arch/arm/include/asm/pgtable-3level.h | 4 ++--
3 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index b0a262566eb9..4245c2e74720 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -213,8 +213,8 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr)
#define pmd_pfn(pmd) (__phys_to_pfn(pmd_val(pmd) & PHYS_MASK))
-#define pmd_leaf(pmd) (pmd_val(pmd) & 2)
-#define pmd_bad(pmd) (pmd_val(pmd) & 2)
+#define pmd_leaf(pmd) (pmd_val(pmd) & PMD_TYPE_SECT)
+#define pmd_bad(pmd) pmd_leaf(pmd)
#define pmd_present(pmd) (pmd_val(pmd))
#define copy_pmd(pmdpd,pmdps) \
diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h
index 2f35b4eddaa8..e7b666cf0060 100644
--- a/arch/arm/include/asm/pgtable-3level-hwdef.h
+++ b/arch/arm/include/asm/pgtable-3level-hwdef.h
@@ -14,6 +14,7 @@
* + Level 1/2 descriptor
* - common
*/
+#define PUD_TABLE_BIT (_AT(pmdval_t, 1) << 1)
#define PMD_TYPE_MASK (_AT(pmdval_t, 3) << 0)
#define PMD_TYPE_FAULT (_AT(pmdval_t, 0) << 0)
#define PMD_TYPE_TABLE (_AT(pmdval_t, 3) << 0)
diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h
index 4b1d9eb3908a..e7aecbef75c9 100644
--- a/arch/arm/include/asm/pgtable-3level.h
+++ b/arch/arm/include/asm/pgtable-3level.h
@@ -112,7 +112,7 @@
#ifndef __ASSEMBLY__
#define pud_none(pud) (!pud_val(pud))
-#define pud_bad(pud) (!(pud_val(pud) & 2))
+#define pud_bad(pud) (!(pud_val(pud) & PUD_TABLE_BIT))
#define pud_present(pud) (pud_val(pud))
#define pmd_table(pmd) ((pmd_val(pmd) & PMD_TYPE_MASK) == \
PMD_TYPE_TABLE)
@@ -137,7 +137,7 @@ static inline pmd_t *pud_pgtable(pud_t pud)
return __va(pud_val(pud) & PHYS_MASK & (s32)PAGE_MASK);
}
-#define pmd_bad(pmd) (!(pmd_val(pmd) & 2))
+#define pmd_bad(pmd) (!(pmd_val(pmd) & PMD_TABLE_BIT))
#define copy_pmd(pmdpd,pmdps) \
do { \
--
2.44.0
next prev parent reply other threads:[~2024-03-18 20:04 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-03-18 20:03 [PATCH v2 00/14] mm/treewide: Remove pXd_huge() API peterx
2024-03-18 20:03 ` [PATCH v2 01/14] mm/hmm: Process pud swap entry without pud_huge() peterx
2024-03-18 20:03 ` [PATCH v2 02/14] mm/gup: Cache p4d in follow_p4d_mask() peterx
2024-03-18 20:03 ` [PATCH v2 03/14] mm/gup: Check p4d presence before going on peterx
2024-03-18 20:03 ` [PATCH v2 04/14] mm/x86: Change pXd_huge() behavior to exclude swap entries peterx
2024-03-18 20:03 ` peterx [this message]
2024-03-18 20:03 ` [PATCH v2 08/14] mm/arm64: Merge pXd_huge() and pXd_leaf() definitions peterx
2024-03-18 20:03 ` [PATCH v2 09/14] mm/powerpc: Redefine pXd_huge() with pXd_leaf() peterx
2024-03-18 20:04 ` [PATCH v2 10/14] mm/gup: Merge pXd huge mapping checks peterx
2024-03-18 20:04 ` [PATCH v2 11/14] mm/treewide: Replace pXd_huge() with pXd_leaf() peterx
2024-03-18 20:04 ` [PATCH v2 13/14] mm/arm: Remove pmd_thp_or_huge() peterx
[not found] ` <20240318200404.448346-6-peterx@redhat.com>
2024-03-19 4:25 ` [PATCH v2 05/14] mm/sparc: Change pXd_huge() behavior to exclude swap entries Muchun Song
2024-03-19 14:04 ` Peter Xu
[not found] ` <20240318200404.448346-13-peterx@redhat.com>
2024-05-27 6:03 ` [PATCH v2 12/14] mm/treewide: Remove pXd_huge() Christophe Leroy
2024-05-27 15:43 ` Peter Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240318200404.448346-7-peterx@redhat.com \
--to=peterx@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=andersson@kernel.org \
--cc=arnd@arndb.de \
--cc=christophe.leroy@csgroup.eu \
--cc=festevam@denx.de \
--cc=jgg@nvidia.com \
--cc=konrad.dybcio@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linux@armlinux.org.uk \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=muchun.song@linux.dev \
--cc=rppt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=sparclinux@vger.kernel.org \
--cc=willy@infradead.org \
--cc=x86@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).