linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Mike Snitzer <snitzer@kernel.org>
To: Chuck Lever <chuck.lever@oracle.com>,
	Jeff Layton <jlayton@kernel.org>, NeilBrown <neil@brown.name>,
	Olga Kornievskaia <okorniev@redhat.com>,
	Dai Ngo <Dai.Ngo@oracle.com>, Tom Talpey <tom@talpey.com>,
	Trond Myklebust <trondmy@kernel.org>,
	Anna Schumaker <anna@kernel.org>
Cc: linux-nfs@vger.kernel.org, linus-fsdevel@vger.kernel.org,
	linux-mm@kvack.org, snitzer@kernel.org
Subject: [RFC PATCH v2 6/8] NFSD: add io_cache_read controls to debugfs interface
Date: Tue,  8 Jul 2025 12:06:17 -0400	[thread overview]
Message-ID: <20250708160619.64800-7-snitzer@kernel.org> (raw)
In-Reply-To: <20250708160619.64800-1-snitzer@kernel.org>

Add 'io_cache_read' to NFSD's debugfs interface so that: Any data
read by NFSD will either be:
- cached using page cache (NFSD_IO_BUFFERED=0)
- cached but removed from the page cache upon completion
  (NFSD_IO_DONTCACHE=1).
- not cached (NFSD_IO_DIRECT=2)

io_cache_read is 0 by default.  It may be set by writing to:
  /sys/kernel/debug/nfsd/io_cache_read

If NFSD_IO_DONTCACHE is specified using 1, FOP_DONTCACHE must be
advertised as supported by the underlying filesystem (e.g. XFS),
otherwise all IO flagged with RWF_DONTCACHE will fail with
-EOPNOTSUPP.

If NFSD_IO_DIRECT is specified using 2, the IO must be aligned
relative to the underlying block device's logical_block_size. Also the
memory buffer used to store the read must be aligned relative to the
underlying block device's dma_alignment.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
---
 fs/nfsd/debugfs.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++
 fs/nfsd/nfsd.h    |  8 +++++++
 fs/nfsd/vfs.c     | 15 ++++++++++++++
 3 files changed, 76 insertions(+)

diff --git a/fs/nfsd/debugfs.c b/fs/nfsd/debugfs.c
index 84b0c8b559dc..709646af797a 100644
--- a/fs/nfsd/debugfs.c
+++ b/fs/nfsd/debugfs.c
@@ -27,11 +27,61 @@ static int nfsd_dsr_get(void *data, u64 *val)
 static int nfsd_dsr_set(void *data, u64 val)
 {
 	nfsd_disable_splice_read = (val > 0) ? true : false;
+	if (!nfsd_disable_splice_read) {
+		/*
+		 * Cannot use NFSD_IO_DONTCACHE or NFSD_IO_DIRECT
+		 * if splice_read is enabled.
+		 */
+		nfsd_io_cache_read = NFSD_IO_BUFFERED;
+	}
 	return 0;
 }
 
 DEFINE_DEBUGFS_ATTRIBUTE(nfsd_dsr_fops, nfsd_dsr_get, nfsd_dsr_set, "%llu\n");
 
+/*
+ * /sys/kernel/debug/nfsd/io_cache_read
+ *
+ * Contents:
+ *   %0: NFS READ will use buffered IO (default)
+ *   %1: NFS READ will use dontcache (buffered IO w/ dropbehind)
+ *   %2: NFS READ will use direct IO
+ *
+ * The default value of this setting is zero (buffered IO is
+ * used). This setting takes immediate effect for all NFS
+ * versions, all exports, and in all NFSD net namespaces.
+ */
+
+static int nfsd_io_cache_read_get(void *data, u64 *val)
+{
+	*val = nfsd_io_cache_read;
+	return 0;
+}
+
+static int nfsd_io_cache_read_set(void *data, u64 val)
+{
+	switch (val) {
+	case NFSD_IO_DONTCACHE:
+	case NFSD_IO_DIRECT:
+		/*
+		 * Must disable splice_read when enabling
+		 * NFSD_IO_DONTCACHE or NFSD_IO_DIRECT.
+		 */
+		nfsd_disable_splice_read = true;
+		nfsd_io_cache_read = val;
+		break;
+	case NFSD_IO_BUFFERED:
+	default:
+		nfsd_io_cache_read = NFSD_IO_BUFFERED;
+		break;
+	}
+
+	return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(nfsd_io_cache_read_fops, nfsd_io_cache_read_get,
+			 nfsd_io_cache_read_set, "%llu\n");
+
 void nfsd_debugfs_exit(void)
 {
 	debugfs_remove_recursive(nfsd_top_dir);
@@ -44,4 +94,7 @@ void nfsd_debugfs_init(void)
 
 	debugfs_create_file("disable-splice-read", S_IWUSR | S_IRUGO,
 			    nfsd_top_dir, NULL, &nfsd_dsr_fops);
+
+	debugfs_create_file("io_cache_read", S_IWUSR | S_IRUGO,
+			    nfsd_top_dir, NULL, &nfsd_io_cache_read_fops);
 }
diff --git a/fs/nfsd/nfsd.h b/fs/nfsd/nfsd.h
index 1cd0bed57bc2..4740567f4e7e 100644
--- a/fs/nfsd/nfsd.h
+++ b/fs/nfsd/nfsd.h
@@ -153,6 +153,14 @@ static inline void nfsd_debugfs_exit(void) {}
 
 extern bool nfsd_disable_splice_read __read_mostly;
 
+enum {
+	NFSD_IO_BUFFERED = 0,
+	NFSD_IO_DONTCACHE,
+	NFSD_IO_DIRECT
+};
+
+extern u64 nfsd_io_cache_read __read_mostly;
+
 extern int nfsd_max_blksize;
 
 static inline int nfsd_v4client(struct svc_rqst *rq)
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index 845c212ad10b..632ce417f4ef 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -49,6 +49,7 @@
 #define NFSDDBG_FACILITY		NFSDDBG_FILEOP
 
 bool nfsd_disable_splice_read __read_mostly;
+u64 nfsd_io_cache_read __read_mostly;
 
 /**
  * nfserrno - Map Linux errnos to NFS errnos
@@ -1107,6 +1108,20 @@ __be32 nfsd_iter_read(struct svc_rqst *rqstp, struct svc_fh *fhp,
 
 	trace_nfsd_read_vector(rqstp, fhp, offset, *count);
 	iov_iter_bvec(&iter, ITER_DEST, rqstp->rq_bvec, v, *count);
+
+	switch (nsfd_io_cache_read) {
+	case NFSD_IO_DIRECT:
+		if (iov_iter_is_aligned(&iter, nf->nf_dio_mem_align - 1,
+					nf->nf_dio_read_offset_align - 1))
+			kiocb.ki_flags = IOCB_DIRECT;
+		break;
+	case NFSD_IO_DONTCACHE:
+		kiocb.ki_flags = IOCB_DONTCACHE;
+		break;
+	case NFSD_IO_BUFFERED:
+		break;
+	}
+
 	host_err = vfs_iocb_iter_read(file, &kiocb, &iter);
 	return nfsd_finish_read(rqstp, fhp, file, offset, count, eof, host_err);
 }
-- 
2.44.0



  parent reply	other threads:[~2025-07-08 16:06 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-07-08 16:06 [RFC PATCH v2 0/8] NFSD: support DIO Mike Snitzer
2025-07-08 16:06 ` [RFC PATCH v2 1/8] NFSD: Relocate the fh_want_write() and fh_drop_write() helpers Mike Snitzer
2025-07-10 13:59   ` Jeff Layton
2025-07-08 16:06 ` [RFC PATCH v2 2/8] NFSD: Move the fh_getattr() helper Mike Snitzer
2025-07-10 13:59   ` Jeff Layton
2025-07-08 16:06 ` [RFC PATCH v2 3/8] NFSD: filecache: add STATX_DIOALIGN and STATX_DIO_READ_ALIGN support Mike Snitzer
2025-07-10  7:45   ` Christoph Hellwig
2025-07-14 17:46     ` Mike Snitzer
2025-07-08 16:06 ` [RFC PATCH v2 4/8] lib/iov_iter: remove piecewise bvec length checking in iov_iter_aligned_bvec Mike Snitzer
2025-07-10  7:24   ` Christoph Hellwig
2025-07-10  7:32     ` Mike Snitzer
2025-07-10  7:44       ` Christoph Hellwig
2025-07-10 13:52   ` Jeff Layton
2025-07-10 14:48     ` Keith Busch
2025-07-10 16:12       ` Mike Snitzer
2025-07-10 16:29         ` Keith Busch
2025-07-10 17:22           ` Mike Snitzer
2025-07-10 19:51             ` Keith Busch
2025-07-10 19:57             ` Keith Busch
2025-08-01 15:23         ` Keith Busch
2025-08-01 16:10           ` Mike Snitzer
2025-07-08 16:06 ` [RFC PATCH v2 5/8] NFSD: pass nfsd_file to nfsd_iter_read() Mike Snitzer
2025-07-08 16:06 ` Mike Snitzer [this message]
2025-07-10  7:47   ` [RFC PATCH v2 6/8] NFSD: add io_cache_read controls to debugfs interface Christoph Hellwig
2025-07-14 17:33     ` Mike Snitzer
2025-07-10 14:06   ` Jeff Layton
2025-07-10 22:46     ` Chuck Lever
2025-07-14 16:47       ` Mike Snitzer
2025-07-15 11:57         ` Jeff Layton
2025-07-08 16:06 ` [RFC PATCH v2 7/8] NFSD: add io_cache_write " Mike Snitzer
2025-07-08 16:06 ` [RFC PATCH v2 8/8] NFSD: issue READs using O_DIRECT even if IO is misaligned Mike Snitzer
2025-07-08 21:22   ` Mike Snitzer
2025-07-10  7:51   ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250708160619.64800-7-snitzer@kernel.org \
    --to=snitzer@kernel.org \
    --cc=Dai.Ngo@oracle.com \
    --cc=anna@kernel.org \
    --cc=chuck.lever@oracle.com \
    --cc=jlayton@kernel.org \
    --cc=linus-fsdevel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-nfs@vger.kernel.org \
    --cc=neil@brown.name \
    --cc=okorniev@redhat.com \
    --cc=tom@talpey.com \
    --cc=trondmy@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).