Linux-mm Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Jiayuan Chen <jiayuan.chen@linux.dev>
To: damon@lists.linux.dev
Cc: jiayuan.chen@shopee.com, Jiayuan Chen <jiayuan.chen@linux.dev>,
	SeongJae Park <sj@kernel.org>,
	Andrew Morton <akpm@linux-foundation.org>,
	Shu Anzai <shu17az@gmail.com>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/2] mm/damon/core: split a fraction of regions when nr_regions exceeds max/2
Date: Fri, 26 Jun 2026 16:58:37 +0800	[thread overview]
Message-ID: <20260626085851.70754-2-jiayuan.chen@linux.dev> (raw)
In-Reply-To: <20260626085851.70754-1-jiayuan.chen@linux.dev>

From: Jiayuan Chen <jiayuan.chen@shopee.com>

kdamond_split_regions() returns early when nr_regions is above
max_nr_regions / 2, leaving internal access variation inside a large
region undetected.

Such a layout is common with damon-paddr on hugepage workloads or
damon-vaddr on processes with a large anonymous mmap.

For example, with max_nr_regions == 1500, a target may end up with
799 small alternating-temperature regions plus one large region that
absorbed a uniformly-accessed range during an earlier merge:

H:hot
C:cold

      r1     r2     r3                 r800
    HHHHHH|CCCCCC|HHHHHH|...|HHHHHH..........................|

    nr_regions = 800  >  max_nr_regions / 2 = 750

If a cold subarea later emerges inside r800:

      r1     r2     r3                 r800
    HHHHHH|CCCCCC|HHHHHH|...|HHHHHH........CCCCCC.............|

The small regions cannot merge with each other (different access
counts), so the budget stays full.  r800 cannot be split because
nr_regions > max_nr_regions / 2 causes an early return.  The cold
subarea is never discovered.

When nr_regions is above max_nr_regions / 2 but still under the
maximum, split only a fraction of the regions instead of returning.
One region in every 'max_nr_regions / budget' regions is split, where
budget is the remaining room (max_nr_regions - nr_regions), starting
from a rotating offset so different regions get picked over time.  The
fraction shrinks as the budget shrinks, so the region count keeps
refining while approaching max_nr_regions smoothly rather than
overshooting it.  An unnecessary split is reverted by the next
kdamond_merge_regions().

Cc: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
---
 mm/damon/core.c | 49 ++++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 44 insertions(+), 5 deletions(-)

diff --git a/mm/damon/core.c b/mm/damon/core.c
index d0cbfb6d1e4c..26a2cdb935f5 100644
--- a/mm/damon/core.c
+++ b/mm/damon/core.c
@@ -3712,6 +3712,37 @@ static void damon_split_regions_of(struct damon_ctx *ctx,
 	}
 }
 
+/* Split one in every @split_step regions into two, from a rotating offset */
+static void damon_split_some_regions(struct damon_ctx *ctx,
+				     unsigned long split_step)
+{
+	static unsigned long rotation;
+	struct damon_target *t;
+	struct damon_region *r, *next;
+	unsigned long offset = rotation++ % split_step;
+	unsigned long idx = 0;
+
+	damon_for_each_target(t, ctx) {
+		damon_for_each_region_safe(r, next, t) {
+			unsigned long sz_region, sz_sub;
+
+			if (idx++ % split_step != offset)
+				continue;
+			sz_region = damon_sz_region(r);
+			if (sz_region < 2 * ctx->min_region_sz)
+				continue;
+
+			sz_sub = ALIGN_DOWN(damon_rand(ctx, 1, 10) *
+					sz_region / 10, ctx->min_region_sz);
+			/* Do not allow blank region */
+			if (sz_sub == 0 || sz_sub >= sz_region)
+				continue;
+
+			damon_split_region_at(t, r, sz_sub);
+		}
+	}
+}
+
 /*
  * Split every target region into randomly-sized small regions
  *
@@ -3725,25 +3756,33 @@ static void damon_split_regions_of(struct damon_ctx *ctx,
 static void kdamond_split_regions(struct damon_ctx *ctx)
 {
 	struct damon_target *t;
-	unsigned int nr_regions = 0;
-	static unsigned int last_nr_regions;
+	unsigned long nr_regions = 0;
+	unsigned long max_nr_regions = ctx->attrs.max_nr_regions;
+	static unsigned long last_nr_regions;
 	int nr_subregions = 2;
 
 	damon_for_each_target(t, ctx)
 		nr_regions += damon_nr_regions(t);
 
-	if (nr_regions > ctx->attrs.max_nr_regions / 2)
-		return;
+	if (nr_regions >= max_nr_regions)
+		goto done;
+
+	if (nr_regions > max_nr_regions / 2) {
+		damon_split_some_regions(ctx,
+			max_nr_regions / (max_nr_regions - nr_regions));
+		goto done;
+	}
 
 	/* Maybe the middle of the region has different access frequency */
 	if (last_nr_regions == nr_regions &&
-			nr_regions < ctx->attrs.max_nr_regions / 3)
+			nr_regions < max_nr_regions / 3)
 		nr_subregions = 3;
 
 	damon_for_each_target(t, ctx)
 		damon_split_regions_of(ctx, t, nr_subregions,
 				       ctx->min_region_sz);
 
+done:
 	last_nr_regions = nr_regions;
 }
 
-- 
2.43.0



  reply	other threads:[~2026-06-26  8:59 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-26  8:58 [PATCH v2 0/2] mm/damon/core: detect internal variation above max_nr_regions/2 Jiayuan Chen
2026-06-26  8:58 ` Jiayuan Chen [this message]
2026-06-26 14:46   ` [PATCH v2 1/2] mm/damon/core: split a fraction of regions when nr_regions exceeds max/2 SeongJae Park
2026-06-26  8:58 ` [PATCH v2 2/2] mm/damon/tests/core-kunit: test split above max_nr_regions/2 Jiayuan Chen
2026-06-26 14:54   ` SeongJae Park
2026-06-26 14:59 ` [PATCH v2 0/2] mm/damon/core: detect internal variation " SeongJae Park

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260626085851.70754-2-jiayuan.chen@linux.dev \
    --to=jiayuan.chen@linux.dev \
    --cc=akpm@linux-foundation.org \
    --cc=damon@lists.linux.dev \
    --cc=jiayuan.chen@shopee.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=shu17az@gmail.com \
    --cc=sj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox