Linux-mm Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Hao Ge <hao.ge@linux.dev>
To: Suren Baghdasaryan <surenb@google.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	Luis Chamberlain <mcgrof@kernel.org>,
	Petr Pavlu <petr.pavlu@suse.com>,
	Daniel Gomez <da.gomez@kernel.org>,
	Sami Tolvanen <samitolvanen@google.com>,
	Aaron Tomlin <atomlin@atomlin.com>
Cc: linux-modules@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-mm@kvack.org, Hao Ge <hao.ge@linux.dev>,
	stable@vger.kernel.org
Subject: [PATCH v5 2/2] alloc_tag: fix undetected compressed tag overflow when profiling is disabled
Date: Wed, 12 Aug 2026 13:41:05 +0800	[thread overview]
Message-ID: <20260812054105.102637-3-hao.ge@linux.dev> (raw)
In-Reply-To: <20260812054105.102637-1-hao.ge@linux.dev>

In reserve_module_tags(), the tag overflow check is gated on
mem_alloc_profiling_enabled():

    if (mem_alloc_profiling_enabled() && !tags_addressable())

If profiling is toggled off at runtime and a module is loaded whose
tags exceed the compressed-mode limit, shutdown_mem_profiling() is
skipped. vm_module_tags_populate() still maps memory for the tags and
the module loads successfully, but the total tag count now exceeds what
NR_UNUSED_PAGEFLAG_BITS can address.

Once profiling is re-enabled, ref_to_idx() computes each tag's index
as its position in the alloc_tag array. update_page_tag_ref() masks
it to alloc_tag_ref_mask before storing in page->flags. Indices
beyond the mask are truncated and idx_to_ref() resolves them to wrong
tags.

This silently corrupts /proc/allocinfo: allocated pages get attributed
to the wrong call sites, so the statistics it reports are wrong.

mem_alloc_profiling_enabled() and mem_profiling_compressed are
independent. Once compressed mode is established at boot, it stays
active regardless of runtime toggles of mem_profiling.

Remove the mem_alloc_profiling_enabled() guard. On overflow, shut down
profiling, release the reservation, and return -EAGAIN so that
layout_and_allocate() retries with profiling disabled: codetag sections
are then placed as regular module data and the module loads without
profiling rather than being rejected entirely.

Fixes: 4835f747d3ed ("alloc_tag: support for page allocation tag compression")
Cc: stable@vger.kernel.org
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Hao Ge <hao.ge@linux.dev>
---
 kernel/module/main.c | 25 +++++++++++++++++++++++--
 mm/alloc_tag.c       |  8 +++++---
 2 files changed, 28 insertions(+), 5 deletions(-)

diff --git a/kernel/module/main.c b/kernel/module/main.c
index 46dd8d25a605..ed26f167be84 100644
--- a/kernel/module/main.c
+++ b/kernel/module/main.c
@@ -2944,6 +2944,7 @@ static struct module *layout_and_allocate(struct load_info *info, int flags)
 {
 	struct module *mod;
 	int err;
+	unsigned long frob_size[MOD_MEM_NUM_TYPES];
 
 	/* Allow arches to frob section contents and sizes.  */
 	err = module_frob_arch_sections(info->hdr, info->sechdrs,
@@ -2966,18 +2967,38 @@ static struct module *layout_and_allocate(struct load_info *info, int flags)
 	 */
 	module_mark_ro_after_init(info->hdr, info->sechdrs, info->secstrings);
 
+	/*
+	 * Save the sizes reserved by module_frob_arch_sections() so they can
+	 * be restored if we retry below.
+	 */
+	for_each_mod_mem_type(type)
+		frob_size[type] = info->mod->mem[type].size;
+
 	/*
 	 * Determine total sizes, and put offsets in sh_entsize.  For now
 	 * this is done generically; there doesn't appear to be any
 	 * special cases for the architectures.
 	 */
+retry:
 	layout_sections(info->mod, info);
 	layout_symtab(info->mod, info);
 
 	/* Allocate and move to the final place */
 	err = move_module(info->mod, info);
-	if (err)
-		return ERR_PTR(err);
+	if (err) {
+		if (err != -EAGAIN)
+			return ERR_PTR(err);
+		/*
+		 * -EAGAIN means profiling was disabled but the module
+		 * can still load without it. Reset state and retry.
+		 */
+		rewrite_section_headers(info, flags);
+		for_each_mod_mem_type(type)
+			info->mod->mem[type].size = frob_size[type];
+		info->sechdrs[info->index.sym].sh_flags &= ~(unsigned long)SHF_ALLOC;
+		info->sechdrs[info->index.str].sh_flags &= ~(unsigned long)SHF_ALLOC;
+		goto retry;
+	}
 
 	/* Module has been copied to its final place now: return it. */
 	mod = (void *)info->sechdrs[info->index.mod].sh_addr;
diff --git a/mm/alloc_tag.c b/mm/alloc_tag.c
index af44f90379f2..0a7b657fe2de 100644
--- a/mm/alloc_tag.c
+++ b/mm/alloc_tag.c
@@ -950,10 +950,12 @@ static void *reserve_module_tags(struct module *mod, unsigned long size,
 		int grow_res;
 
 		module_tags.size = offset + size;
-		if (mem_alloc_profiling_enabled() && !tags_addressable()) {
+		if (!tags_addressable()) {
 			shutdown_mem_profiling(true);
-			pr_warn("With module %s there are too many tags to fit in %d page flag bits. Memory allocation profiling is disabled!\n",
-				mod->name, NR_UNUSED_PAGEFLAG_BITS);
+			pr_warn_once("With module %s there are too many tags to fit in %d page flag bits. Memory allocation profiling is disabled!\n",
+				     mod->name, NR_UNUSED_PAGEFLAG_BITS);
+			release_module_tags(mod, false);
+			return ERR_PTR(-EAGAIN);
 		}
 
 		grow_res = vm_module_tags_populate();
-- 
2.25.1



      parent reply	other threads:[~2026-08-12  5:41 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-12  5:41 [PATCH v5 0/2] alloc_tag: fix undetected compressed tag overflow when profiling is disabled Hao Ge
2026-08-12  5:41 ` [PATCH v5 1/2] alloc_tag: move release_module_tags() above reserve_module_tags() Hao Ge
2026-08-12  5:41 ` Hao Ge [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260812054105.102637-3-hao.ge@linux.dev \
    --to=hao.ge@linux.dev \
    --cc=akpm@linux-foundation.org \
    --cc=atomlin@atomlin.com \
    --cc=da.gomez@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux-modules@vger.kernel.org \
    --cc=mcgrof@kernel.org \
    --cc=petr.pavlu@suse.com \
    --cc=samitolvanen@google.com \
    --cc=stable@vger.kernel.org \
    --cc=surenb@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox