Linux-mm Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Song Hu <husong@kylinos.cn>
To: akpm@linux-foundation.org, usama.anjum@arm.com
Cc: linux-mm@kvack.org, shuah@kernel.org, david@kernel.org,
	ljs@kernel.org, liam@infradead.org, vbabka@kernel.org,
	rppt@kernel.org, surenb@google.com, mhocko@suse.com,
	peterx@redhat.com, sarthak.sharma@arm.com,
	linux-kselftest@vger.kernel.org, linux-kernel@vger.kernel.org,
	Song Hu <husong@kylinos.cn>
Subject: [PATCH v4 2/3] selftests/mm: emit TAP header and use TAP skip in mremap_test
Date: Tue, 25 Aug 2026 16:57:55 +0800	[thread overview]
Message-ID: <20260825085756.63030-3-husong@kylinos.cn> (raw)
In-Reply-To: <20260825085756.63030-1-husong@kylinos.cn>

mremap_test calls ksft_set_plan() without ksft_print_header(), and its
get_mmap_min_addr() skip path uses a bare exit(KSFT_SKIP) that prints no
TAP line, so its output is not valid KTAP.  Add the header and switch
the skip to ksft_exit_skip().

Also fix two more KTAP compliance issues spotted in review:

- get_mmap_min_addr() calls strerror(errno) after fclose(), which may
  clobber errno; save errno before fclose() instead.

- Some ksft_*() messages embed "\n\t", so the text after each embedded
  newline is printed without the "# " prefix.  Split those into separate
  messages.

And cache mmap_min_addr in main() before ksft_set_plan(), so that the
skip paths in get_mmap_min_addr() are taken before the plan is set; a
skip after the plan leaves the run with fewer tests than planned.

Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Sarthak Sharma <sarthak.sharma@arm.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@arm.com>
Tested-by: Muhammad Usama Anjum <usama.anjum@arm.com>
Acked-by: Lorenzo Stoakes (ARM) <ljs@kernel.org>
Signed-off-by: Song Hu <husong@kylinos.cn>
---
 tools/testing/selftests/mm/mremap_test.c | 43 ++++++++++++++----------
 1 file changed, 25 insertions(+), 18 deletions(-)

diff --git a/tools/testing/selftests/mm/mremap_test.c b/tools/testing/selftests/mm/mremap_test.c
index 131d9d6db867..ab5420f2e875 100644
--- a/tools/testing/selftests/mm/mremap_test.c
+++ b/tools/testing/selftests/mm/mremap_test.c
@@ -111,18 +111,17 @@ static unsigned long long get_mmap_min_addr(void)
 		return addr;
 
 	fp = fopen("/proc/sys/vm/mmap_min_addr", "r");
-	if (fp == NULL) {
-		ksft_print_msg("Failed to open /proc/sys/vm/mmap_min_addr: %s\n",
-			strerror(errno));
-		exit(KSFT_SKIP);
-	}
+	if (!fp)
+		ksft_exit_skip("Failed to open /proc/sys/vm/mmap_min_addr: %s\n",
+			       strerror(errno));
 
 	n_matched = fscanf(fp, "%llu", &addr);
 	if (n_matched != 1) {
-		ksft_print_msg("Failed to read /proc/sys/vm/mmap_min_addr: %s\n",
-			strerror(errno));
+		int err = errno;
+
 		fclose(fp);
-		exit(KSFT_SKIP);
+		ksft_exit_skip("Failed to read /proc/sys/vm/mmap_min_addr: %s\n",
+			       strerror(err));
 	}
 
 	fclose(fp);
@@ -1164,10 +1163,11 @@ static void run_mremap_test_case(struct test test_case, int *failures,
 					    rand_addr);
 
 	if (remap_time < 0) {
-		if (test_case.expect_failure)
-			ksft_test_result_xfail("%s\n\tExpected mremap failure\n",
-					      test_case.name);
-		else {
+		if (test_case.expect_failure) {
+			ksft_print_msg("%s: expected mremap failure\n",
+				       test_case.name);
+			ksft_test_result_xfail("%s\n", test_case.name);
+		} else {
 			ksft_test_result_fail("%s\n", test_case.name);
 			*failures += 1;
 		}
@@ -1177,11 +1177,13 @@ static void run_mremap_test_case(struct test test_case, int *failures,
 		 * was faulted in.
 		 */
 		if (threshold_mb == VALIDATION_NO_THRESHOLD ||
-		    test_case.config.region_size <= threshold_mb * _1MB)
-			ksft_test_result_pass("%s\n\tmremap time: %12lldns\n",
-					      test_case.name, remap_time);
-		else
+		    test_case.config.region_size <= threshold_mb * _1MB) {
+			ksft_print_msg("%s: mremap time: %12lldns\n",
+				       test_case.name, remap_time);
 			ksft_test_result_pass("%s\n", test_case.name);
+		} else {
+			ksft_test_result_pass("%s\n", test_case.name);
+		}
 	}
 }
 
@@ -1250,13 +1252,18 @@ int main(int argc, char **argv)
 	time_t t;
 	FILE *maps_fp;
 
+	ksft_print_header();
+
+	get_mmap_min_addr();
+
 	pattern_seed = (unsigned int) time(&t);
 
 	if (parse_args(argc, argv, &threshold_mb, &pattern_seed) < 0)
 		exit(EXIT_FAILURE);
 
-	ksft_print_msg("Test configs:\n\tthreshold_mb=%u\n\tpattern_seed=%u\n\n",
-		       threshold_mb, pattern_seed);
+	ksft_print_msg("Test configs:\n");
+	ksft_print_msg("threshold_mb=%u\n", threshold_mb);
+	ksft_print_msg("pattern_seed=%u\n", pattern_seed);
 
 	/*
 	 * set preallocated random array according to test configs; see the
-- 
2.43.0



  parent reply	other threads:[~2026-08-25  8:59 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-25  8:57 [PATCH v4 0/3] selftests/mm: TAP output and global-state fixes Song Hu
2026-08-25  8:57 ` [PATCH v4 1/3] selftests/mm: emit TAP header in uffd-wp-mremap Song Hu
2026-09-10  9:28   ` David Hildenbrand (Arm)
2026-08-25  8:57 ` Song Hu [this message]
2026-09-10  9:33   ` [PATCH v4 2/3] selftests/mm: emit TAP header and use TAP skip in mremap_test David Hildenbrand (Arm)
2026-08-25  8:57 ` [PATCH v4 3/3] selftests/mm: restore enable_soft_offline in hugetlb-soft-offline Song Hu
2026-08-25  9:06   ` Song Hu
2026-08-25  9:24   ` Muhammad Usama Anjum
2026-09-10  9:36   ` David Hildenbrand (Arm)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260825085756.63030-3-husong@kylinos.cn \
    --to=husong@kylinos.cn \
    --cc=akpm@linux-foundation.org \
    --cc=david@kernel.org \
    --cc=liam@infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-kselftest@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=ljs@kernel.org \
    --cc=mhocko@suse.com \
    --cc=peterx@redhat.com \
    --cc=rppt@kernel.org \
    --cc=sarthak.sharma@arm.com \
    --cc=shuah@kernel.org \
    --cc=surenb@google.com \
    --cc=usama.anjum@arm.com \
    --cc=vbabka@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox