From: Daehyeon Ko <4ncienth@gmail.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Suren Baghdasaryan <surenb@google.com>,
"Liam R . Howlett" <liam@infradead.org>,
Lorenzo Stoakes <ljs@kernel.org>,
David Hildenbrand <david@kernel.org>
Cc: Vlastimil Babka <vbabka@kernel.org>,
Mike Rapoport <rppt@kernel.org>, Jann Horn <jannh@google.com>,
Michal Hocko <mhocko@suse.com>,
Shakeel Butt <shakeel.butt@linux.dev>,
Pedro Falcato <pfalcato@suse.de>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Daehyeon Ko <4ncienth@gmail.com>
Subject: [PATCH] mm: prevent VMA generation reuse from skipping readers
Date: Thu, 15 Oct 2026 23:37:35 +0900 [thread overview]
Message-ID: <20261015143735.1630957-1-4ncienth@gmail.com> (raw)
Per-VMA write locking treats equality between vm_lock_seq and the current
mm_lock_seq as proof that the active mmap writer already excluded readers.
Both values are 32-bit. After 2^31 complete mmap write-lock acquisitions,
an old VMA stamp can alias the live odd generation. vma_start_write() then
returns without waiting for an existing reader.
A capability-free reproducer uses brk(0) to recycle the generation, then
races an anonymous fault with MREMAP_DONTUNMAP. The stale equality lets
mremap move and tear down a PMD table while the fault retains vmf->pmd.
Unmodified kernels panic in folio_add_new_anon_rmap(), while diagnostic
runs show a freed PMD access and a writable mapping created in another
PROT_NONE VMA.
Add an epoch that advances whenever mm_lock_seq wraps. Stamp it with the
sequence after excluding readers, and require both fields to match before a
writer takes the already-locked fast path. Reader checks remain unchanged;
reused sequence values only cause a pessimistic fallback there.
The fixed KASAN kernel completed the real-wrap THP schedule on three fresh
boots without KASAN, warnings, oopses or panics. Kernels before v6.15 use
the older rwsem-based per-VMA locking and need an adapted backport.
Fixes: 5e31275cc997 ("mm: add per-VMA lock and helper functions to control it")
Link: https://lore.kernel.org/r/20241010205644.3831427-3-andrii@kernel.org
Cc: stable@vger.kernel.org
Assisted-by: LLM
Signed-off-by: Daehyeon Ko <4ncienth@gmail.com>
---
include/linux/mm_types.h | 10 +++++++---
include/linux/mmap_lock.h | 14 +++++++++++---
mm/mmap_lock.c | 2 ++
tools/testing/vma/include/dup.h | 10 ++++++----
4 files changed, 26 insertions(+), 10 deletions(-)
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index f3e5a2fadbe5b7..309a278e552451 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -961,9 +961,9 @@ struct vm_area_struct {
* Can be read unreliably (using READ_ONCE()) for pessimistic bailout
* while holding nothing (except RCU to keep the VMA struct allocated).
*
- * This sequence counter is explicitly allowed to overflow; sequence
- * counter reuse can only lead to occasional unnecessary use of the
- * slowpath.
+ * This sequence counter is explicitly allowed to overflow. Readers can
+ * treat a reused value as a pessimistic false positive. Writers also
+ * compare vm_lock_seq_epoch so reuse cannot skip reader exclusion.
*/
unsigned int vm_lock_seq;
#endif
@@ -1004,6 +1004,8 @@ struct vm_area_struct {
struct vma_numab_state *numab_state; /* NUMA Balancing state */
#endif
#ifdef CONFIG_PER_VMA_LOCK
+ /* Extends vm_lock_seq without moving the hot VMA header fields. */
+ unsigned int vm_lock_seq_epoch;
/*
* Used to keep track of firstly, whether the VMA is attached, secondly,
* if attached, how many read locks are taken, and thirdly, if the
@@ -1274,6 +1276,8 @@ struct mm_struct {
* mmap_lock.
*/
seqcount_t mm_lock_seq;
+ /* Extends the VMA writer generation across sequence wrap. */
+ unsigned int mm_lock_seq_epoch;
#endif
struct futex_mm_data futex;
diff --git a/include/linux/mmap_lock.h b/include/linux/mmap_lock.h
index b8a13b8d36a45b..27caf8818e0b75 100644
--- a/include/linux/mmap_lock.h
+++ b/include/linux/mmap_lock.h
@@ -118,6 +118,7 @@ static inline void mmap_assert_write_locked(const struct mm_struct *mm)
static inline void mm_lock_seqcount_init(struct mm_struct *mm)
{
seqcount_init(&mm->mm_lock_seq);
+ mm->mm_lock_seq_epoch = 0;
}
static inline void mm_lock_seqcount_begin(struct mm_struct *mm)
@@ -128,6 +129,8 @@ static inline void mm_lock_seqcount_begin(struct mm_struct *mm)
static inline void mm_lock_seqcount_end(struct mm_struct *mm)
{
ASSERT_EXCLUSIVE_WRITER(mm->mm_lock_seq);
+ if (unlikely(mm->mm_lock_seq.sequence == UINT_MAX))
+ mm->mm_lock_seq_epoch++;
do_raw_write_seqcount_end(&mm->mm_lock_seq);
}
@@ -157,6 +160,7 @@ static inline void vma_lock_init(struct vm_area_struct *vma, bool reset_refcnt)
if (reset_refcnt)
refcount_set(&vma->vm_refcnt, 0);
vma->vm_lock_seq = UINT_MAX;
+ vma->vm_lock_seq_epoch = UINT_MAX;
}
/*
@@ -281,11 +285,15 @@ static inline unsigned int __vma_raw_mm_seqnum(struct vm_area_struct *vma)
*/
static inline bool __is_vma_write_locked(struct vm_area_struct *vma)
{
+ const struct mm_struct *mm = vma->vm_mm;
+
/*
- * current task is holding mmap_write_lock, both vma->vm_lock_seq and
- * mm->mm_lock_seq can't be concurrently modified.
+ * The current task holds mmap_write_lock, so neither generation can be
+ * concurrently modified. The epoch prevents a wrapped sequence from
+ * making an old VMA stamp look current to a writer.
*/
- return vma->vm_lock_seq == __vma_raw_mm_seqnum(vma);
+ return vma->vm_lock_seq == __vma_raw_mm_seqnum(vma) &&
+ vma->vm_lock_seq_epoch == mm->mm_lock_seq_epoch;
}
int __vma_start_write(struct vm_area_struct *vma, int state);
diff --git a/mm/mmap_lock.c b/mm/mmap_lock.c
index 898c2ef1e95803..281659225b1dbb 100644
--- a/mm/mmap_lock.c
+++ b/mm/mmap_lock.c
@@ -139,6 +139,7 @@ static int __vma_start_exclude_readers(struct vma_exclude_readers_state *ves)
int __vma_start_write(struct vm_area_struct *vma, int state)
{
const unsigned int mm_lock_seq = __vma_raw_mm_seqnum(vma);
+ const unsigned int mm_lock_seq_epoch = vma->vm_mm->mm_lock_seq_epoch;
struct vma_exclude_readers_state ves = {
.vma = vma,
.state = state,
@@ -158,6 +159,7 @@ int __vma_start_write(struct vm_area_struct *vma, int state)
* we should use WRITE_ONCE() for cleanliness and to keep KCSAN happy.
*/
WRITE_ONCE(vma->vm_lock_seq, mm_lock_seq);
+ WRITE_ONCE(vma->vm_lock_seq_epoch, mm_lock_seq_epoch);
if (ves.exclusive) {
__vma_end_exclude_readers(&ves);
diff --git a/tools/testing/vma/include/dup.h b/tools/testing/vma/include/dup.h
index 4c58487b764e9d..211ffbf5850057 100644
--- a/tools/testing/vma/include/dup.h
+++ b/tools/testing/vma/include/dup.h
@@ -571,9 +571,9 @@ struct vm_area_struct {
* Can be read unreliably (using READ_ONCE()) for pessimistic bailout
* while holding nothing (except RCU to keep the VMA struct allocated).
*
- * This sequence counter is explicitly allowed to overflow; sequence
- * counter reuse can only lead to occasional unnecessary use of the
- * slowpath.
+ * This sequence counter is explicitly allowed to overflow. Readers can
+ * treat a reused value as a pessimistic false positive. Writers also
+ * compare vm_lock_seq_epoch so reuse cannot skip reader exclusion.
*/
unsigned int vm_lock_seq;
#endif
@@ -611,7 +611,8 @@ struct vm_area_struct {
struct vma_numab_state *numab_state; /* NUMA Balancing state */
#endif
#ifdef CONFIG_PER_VMA_LOCK
- /* Unstable RCU readers are allowed to read this. */
+ /* Extends vm_lock_seq without moving the hot VMA header fields. */
+ unsigned int vm_lock_seq_epoch;
refcount_t vm_refcnt;
#endif
#ifdef CONFIG_64BIT
@@ -1230,6 +1231,7 @@ static inline void vma_init(struct vm_area_struct *vma, struct mm_struct *mm)
vma->vm_ops = &vma_dummy_vm_ops;
INIT_LIST_HEAD(&vma->anon_vma_chain);
vma->vm_lock_seq = UINT_MAX;
+ vma->vm_lock_seq_epoch = UINT_MAX;
}
/*
base-commit: 0fcb05b72344f40806cbe810de8872f1698bf053
--
2.55.0
next reply other threads:[~2026-10-15 14:37 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-15 14:37 Daehyeon Ko [this message]
2026-10-15 16:28 ` [PATCH] mm: prevent VMA generation reuse from skipping readers Lorenzo Stoakes (ARM)
2026-10-15 18:13 ` Lorenzo Stoakes (ARM)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261015143735.1630957-1-4ncienth@gmail.com \
--to=4ncienth@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=david@kernel.org \
--cc=jannh@google.com \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=mhocko@suse.com \
--cc=pfalcato@suse.de \
--cc=rppt@kernel.org \
--cc=shakeel.butt@linux.dev \
--cc=surenb@google.com \
--cc=vbabka@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox