Re: 2.6.1-mm4

Adrian Bunk
2004-01-17T02:22:23Z

On Thu, Jan 15, 2004 at 10:59:48PM -0800, Andrew Morton wrote:
>...
> - There's a patch here which changes the ia32 CPU type selection. Make
> sure you go in there and select the right CPU type(s), else the kernel
> won't compile. We might need to set a default here.
>...

Hi Andrew,

thanks for including my patch to give it further testing, and also
thanks for this suggestion.

The patch below lets all cpu options default to "y".

cu
Adrian

--- linux-2.6.1-mm4/arch/i386/Kconfig.old 2004-01-17 02:13:22.000000000 +0100
+++ linux-2.6.1-mm4/arch/i386/Kconfig 2004-01-17 02:14:51.000000000 +0100
@@ -147,11 +147,13 @@

config CPU_386
bool "386"
+ default y
help
Select this for a 386 series processor.

config CPU_486
bool "486"
+ default y
help
Select this for a 486 series processor, either Intel or one of the
compatible processors from AMD, Cyrix, IBM, or Intel. Includes DX,
@@ -160,6 +162,7 @@

config CPU_586
bool "586/K5/5x86/6x86/6x86MX"
+ default y
help
Select this for a non-Intel 586 or 686 series processor such as
the AMD K5 or the Cyrix 6x86MX.
@@ -173,41 +176,48 @@

config CPU_586TSC
bool "Pentium-Classic"
+ default y
help
Select this for a Pentium Classic processor with the RDTSC (Read
Time Stamp Counter) instruction.

config CPU_586MMX
bool "Pentium-MMX"
+ default y
help
Select this for a Pentium with the MMX graphics/multimedia
extended instructions.

config CPU_686
bool "Pentium-Pro"
+ default y
help
Select this for Intel Pentium Pro chips.

config CPU_PENTIUMII
bool "Pentium-II/Celeron(pre-Coppermine)"
+ default y
help
Select this for Intel chips based on the Pentium-II and
pre-Coppermine Celeron core.

config CPU_PENTIUMIII
bool "Pentium-III/Celeron(Coppermine)/Pentium-III Xeon"
+ default y
help
Select this for Intel chips based on the Pentium-III and
Celeron-Coppermine core.

config CPU_PENTIUMM
bool "Pentium M"
+ default y
help
Select this for Intel Pentium M (not Pentium-4 M)
notebook chips.

config CPU_PENTIUM4
bool "Pentium-4/Celeron(P4-based)/Pentium-4 M/Xeon"
+ default y
help
Select this for Intel Pentium 4 chips. This includes
the Pentium 4, P4-based Celeron and Xeon, and
@@ -215,42 +225,50 @@

config CPU_K6
bool "K6/K6-II/K6-III"
+ default y
help
Select this for an AMD K6, K6-II or K6-III (aka K6-3D).

config CPU_K7
bool "Athlon/Duron/K7"
+ default y
help
Select this for an AMD Athlon K7-family processor.

config CPU_K8
bool "Opteron/Athlon64/Hammer/K8"
+ default y
help
Select this for an AMD Opteron or Athlon64 Hammer-family processor.

config CPU_CRUSOE
bool "Crusoe"
+ default y
help
Select this for a Transmeta Crusoe processor.

config CPU_WINCHIPC6
bool "Winchip-C6"
+ default y
help
Select this for an IDT Winchip C6 chip.

config CPU_WINCHIP2
bool "Winchip-2"
+ default y
help
Select this for an IDT Winchip-2.

config CPU_WINCHIP3D
bool "Winchip-2A/Winchip-3"
+ default y
help
Select this for an IDT Winchip-2A or 3 with 3dNow!
capabilities.

config CPU_CYRIXIII
bool "Cyrix III/VIA C3"
+ default y
help
Select this for a Cyrix III or VIA C3 chip.

@@ -259,6 +277,7 @@

config CPU_VIAC3_2
bool "VIA C3-2 (Nehemiah)"
+ default y
help
Select this for a VIA C3 "Nehemiah" (model 9 and above).