[PATCH 1/2] Add the max_usage member on the res_counter

[PATCH 1/2] Add the max_usage member on the res_counter

[Pavel Emelyanov]

This is a very usefull feature. E.g. one may set the
limit to "unlimited" value and check for the memory
requirements of a new container.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>

---
 include/linux/res_counter.h |    5 +++++
 kernel/res_counter.c        |    4 ++++
 mm/memcontrol.c             |    5 +++++
 3 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index 8cb1ecd..2c4deb5 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -25,6 +25,10 @@ struct res_counter {
 	 */
 	unsigned long long usage;
 	/*
+	 * the maximal value of the usage from the counter creation
+	 */
+	unsigned long long max_usage;
+	/*
 	 * the limit that usage cannot exceed
 	 */
 	unsigned long long limit;
@@ -67,6 +71,7 @@ ssize_t res_counter_write(struct res_counter *counter, int member,
 
 enum {
 	RES_USAGE,
+	RES_MAX_USAGE,
 	RES_LIMIT,
 	RES_FAILCNT,
 };
diff --git a/kernel/res_counter.c b/kernel/res_counter.c
index 791ff2b..f1f20c2 100644
--- a/kernel/res_counter.c
+++ b/kernel/res_counter.c
@@ -27,6 +27,8 @@ int res_counter_charge_locked(struct res_counter *counter, unsigned long val)
 	}
 
 	counter->usage += val;
+	if (counter->usage > counter->max_usage)
+		counter->max_usage = counter->usage;
 	return 0;
 }
 
@@ -65,6 +67,8 @@ res_counter_member(struct res_counter *counter, int member)
 	switch (member) {
 	case RES_USAGE:
 		return &counter->usage;
+	case RES_MAX_USAGE:
+		return &counter->max_usage;
 	case RES_LIMIT:
 		return &counter->limit;
 	case RES_FAILCNT:
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index 2d59163..e5c741a 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -911,6 +911,11 @@ static struct cftype mem_cgroup_files[] = {
 		.read_u64 = mem_cgroup_read,
 	},
 	{
+		.name = "max_usage_in_bytes",
+		.private = RES_MAX_USAGE,
+		.read_u64 = mem_cgroup_read,
+	},
+	{
 		.name = "limit_in_bytes",
 		.private = RES_LIMIT,
 		.write = mem_cgroup_write,
-- 
1.5.3.4

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 1/2] Add the max_usage member on the res_counter

[KAMEZAWA Hiroyuki]

On Fri, 07 Mar 2008 18:30:55 +0300
Pavel Emelyanov <xemul@openvz.org> wrote:

> This is a very usefull feature. E.g. one may set the
> limit to "unlimited" value and check for the memory
> requirements of a new container.
> 
Hm, I like this. Could you add a method to reset this counter ?

Thanks,
-Kame


> Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
> 
> ---
>  include/linux/res_counter.h |    5 +++++
>  kernel/res_counter.c        |    4 ++++
>  mm/memcontrol.c             |    5 +++++
>  3 files changed, 14 insertions(+), 0 deletions(-)
> 
> diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
> index 8cb1ecd..2c4deb5 100644
> --- a/include/linux/res_counter.h
> +++ b/include/linux/res_counter.h
> @@ -25,6 +25,10 @@ struct res_counter {
>  	 */
>  	unsigned long long usage;
>  	/*
> +	 * the maximal value of the usage from the counter creation
> +	 */
> +	unsigned long long max_usage;
> +	/*
>  	 * the limit that usage cannot exceed
>  	 */
>  	unsigned long long limit;
> @@ -67,6 +71,7 @@ ssize_t res_counter_write(struct res_counter *counter, int member,
>  
>  enum {
>  	RES_USAGE,
> +	RES_MAX_USAGE,
>  	RES_LIMIT,
>  	RES_FAILCNT,
>  };
> diff --git a/kernel/res_counter.c b/kernel/res_counter.c
> index 791ff2b..f1f20c2 100644
> --- a/kernel/res_counter.c
> +++ b/kernel/res_counter.c
> @@ -27,6 +27,8 @@ int res_counter_charge_locked(struct res_counter *counter, unsigned long val)
>  	}
>  
>  	counter->usage += val;
> +	if (counter->usage > counter->max_usage)
> +		counter->max_usage = counter->usage;
>  	return 0;
>  }
>  
> @@ -65,6 +67,8 @@ res_counter_member(struct res_counter *counter, int member)
>  	switch (member) {
>  	case RES_USAGE:
>  		return &counter->usage;
> +	case RES_MAX_USAGE:
> +		return &counter->max_usage;
>  	case RES_LIMIT:
>  		return &counter->limit;
>  	case RES_FAILCNT:
> diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> index 2d59163..e5c741a 100644
> --- a/mm/memcontrol.c
> +++ b/mm/memcontrol.c
> @@ -911,6 +911,11 @@ static struct cftype mem_cgroup_files[] = {
>  		.read_u64 = mem_cgroup_read,
>  	},
>  	{
> +		.name = "max_usage_in_bytes",
> +		.private = RES_MAX_USAGE,
> +		.read_u64 = mem_cgroup_read,
> +	},
> +	{
>  		.name = "limit_in_bytes",
>  		.private = RES_LIMIT,
>  		.write = mem_cgroup_write,
> -- 
> 1.5.3.4
> 
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org.  For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 1/2] Add the max_usage member on the res_counter

[Pavel Emelyanov]

KAMEZAWA Hiroyuki wrote:
> On Fri, 07 Mar 2008 18:30:55 +0300
> Pavel Emelyanov <xemul@openvz.org> wrote:
> 
>> This is a very usefull feature. E.g. one may set the
>> limit to "unlimited" value and check for the memory
>> requirements of a new container.
>>
> Hm, I like this. Could you add a method to reset this counter ?

OK. Sounds reasonable.

> How about
> 
> 	counter->max_usage = max(counter->usage, counter->max_usage);

No, I prefer explicit checks :)

> Looks very good,
> 
> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>

OK. I'll push this change the the git at openvz.org then.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

Re: [PATCH 1/2] Add the max_usage member on the res_counter

[Balbir Singh]

Pavel Emelyanov wrote:
> This is a very usefull feature. E.g. one may set the
> limit to "unlimited" value and check for the memory
> requirements of a new container.
> 
> Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
> 
> ---
>  include/linux/res_counter.h |    5 +++++
>  kernel/res_counter.c        |    4 ++++
>  mm/memcontrol.c             |    5 +++++
>  3 files changed, 14 insertions(+), 0 deletions(-)
> 
> diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
> index 8cb1ecd..2c4deb5 100644
> --- a/include/linux/res_counter.h
> +++ b/include/linux/res_counter.h
> @@ -25,6 +25,10 @@ struct res_counter {
>  	 */
>  	unsigned long long usage;
>  	/*
> +	 * the maximal value of the usage from the counter creation
> +	 */
> +	unsigned long long max_usage;
> +	/*
>  	 * the limit that usage cannot exceed
>  	 */
>  	unsigned long long limit;
> @@ -67,6 +71,7 @@ ssize_t res_counter_write(struct res_counter *counter, int member,
> 
>  enum {
>  	RES_USAGE,
> +	RES_MAX_USAGE,
>  	RES_LIMIT,
>  	RES_FAILCNT,
>  };
> diff --git a/kernel/res_counter.c b/kernel/res_counter.c
> index 791ff2b..f1f20c2 100644
> --- a/kernel/res_counter.c
> +++ b/kernel/res_counter.c
> @@ -27,6 +27,8 @@ int res_counter_charge_locked(struct res_counter *counter, unsigned long val)
>  	}
> 
>  	counter->usage += val;
> +	if (counter->usage > counter->max_usage)
> +		counter->max_usage = counter->usage;

How about

	counter->max_usage = max(counter->usage, counter->max_usage);

>  	return 0;
>  }
> 
> @@ -65,6 +67,8 @@ res_counter_member(struct res_counter *counter, int member)
>  	switch (member) {
>  	case RES_USAGE:
>  		return &counter->usage;
> +	case RES_MAX_USAGE:
> +		return &counter->max_usage;
>  	case RES_LIMIT:
>  		return &counter->limit;
>  	case RES_FAILCNT:
> diff --git a/mm/memcontrol.c b/mm/memcontrol.c
> index 2d59163..e5c741a 100644
> --- a/mm/memcontrol.c
> +++ b/mm/memcontrol.c
> @@ -911,6 +911,11 @@ static struct cftype mem_cgroup_files[] = {
>  		.read_u64 = mem_cgroup_read,
>  	},
>  	{
> +		.name = "max_usage_in_bytes",
> +		.private = RES_MAX_USAGE,
> +		.read_u64 = mem_cgroup_read,
> +	},
> +	{
>  		.name = "limit_in_bytes",
>  		.private = RES_LIMIT,
>  		.write = mem_cgroup_write,

Looks very good,

Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>

-- 
	Warm Regards,
	Balbir Singh
	Linux Technology Center
	IBM, ISTL

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>