From: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
To: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
William Irwin <wli@holomorphy.com>,
linux-mm@kvack.org, LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH 5/5] mm: search from free_area_cache for the bigger size
Date: Fri, 13 Jan 2012 19:47:31 +0800 [thread overview]
Message-ID: <4F1019D3.8020709@linux.vnet.ibm.com> (raw)
In-Reply-To: <4F101904.8090405@linux.vnet.ibm.com>
If the required size is bigger than cached_hole_size, we would better search
from free_area_cache, it is more easier to get free region, specifically for
the 64 bit process whose address space is large enough
Do it just as hugetlb_get_unmapped_area_topdown() in arch/x86/mm/hugetlbpage.c
Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
---
arch/x86/kernel/sys_x86_64.c | 34 +++++++++++++++++-----------------
mm/mmap.c | 36 +++++++++++++++++++++---------------
2 files changed, 38 insertions(+), 32 deletions(-)
diff --git a/arch/x86/kernel/sys_x86_64.c b/arch/x86/kernel/sys_x86_64.c
index 0514890..ef59642 100644
--- a/arch/x86/kernel/sys_x86_64.c
+++ b/arch/x86/kernel/sys_x86_64.c
@@ -195,7 +195,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
{
struct vm_area_struct *vma;
struct mm_struct *mm = current->mm;
- unsigned long addr = addr0;
+ unsigned long addr = addr0, start_addr;
/* requested length too big for entire address space */
if (len > TASK_SIZE)
@@ -223,25 +223,14 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
mm->free_area_cache = mm->mmap_base;
}
+try_again:
/* either no address requested or can't fit in requested address hole */
- addr = mm->free_area_cache;
-
- /* make sure it can fit in the remaining address space */
- if (addr > len) {
- unsigned long tmp_addr = align_addr(addr - len, filp,
- ALIGN_TOPDOWN);
-
- vma = find_vma(mm, tmp_addr);
- if (!vma || tmp_addr + len <= vma->vm_start)
- /* remember the address as a hint for next time */
- return mm->free_area_cache = tmp_addr;
- }
-
- if (mm->mmap_base < len)
- goto bottomup;
+ start_addr = addr = mm->free_area_cache;
- addr = mm->mmap_base-len;
+ if (addr < len)
+ goto fail;
+ addr -= len;
do {
addr = align_addr(addr, filp, ALIGN_TOPDOWN);
@@ -263,6 +252,17 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
addr = vma->vm_start-len;
} while (len < vma->vm_start);
+fail:
+ /*
+ * if hint left us with no space for the requested
+ * mapping then try again:
+ */
+ if (start_addr != mm->mmap_base) {
+ mm->free_area_cache = mm->mmap_base;
+ mm->cached_hole_size = 0;
+ goto try_again;
+ }
+
bottomup:
/*
* A failed mmap() very likely causes application failure,
diff --git a/mm/mmap.c b/mm/mmap.c
index 970f572..e3c4b97 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -1439,7 +1439,7 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
{
struct vm_area_struct *vma;
struct mm_struct *mm = current->mm;
- unsigned long addr = addr0;
+ unsigned long addr = addr0, start_addr;
/* requested length too big for entire address space */
if (len > TASK_SIZE)
@@ -1463,22 +1463,14 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
mm->free_area_cache = mm->mmap_base;
}
+try_again:
/* either no address requested or can't fit in requested address hole */
- addr = mm->free_area_cache;
+ start_addr = addr = mm->free_area_cache;
- /* make sure it can fit in the remaining address space */
- if (addr > len) {
- vma = find_vma(mm, addr-len);
- if (!vma || addr <= vma->vm_start)
- /* remember the address as a hint for next time */
- return (mm->free_area_cache = addr-len);
- }
-
- if (mm->mmap_base < len)
- goto bottomup;
-
- addr = mm->mmap_base-len;
+ if (addr < len)
+ goto fail;
+ addr -= len;
do {
/*
* Lookup failure means no vma is above this address,
@@ -1498,7 +1490,21 @@ arch_get_unmapped_area_topdown(struct file *filp, const unsigned long addr0,
addr = vma->vm_start-len;
} while (len < vma->vm_start);
-bottomup:
+fail:
+ /*
+ * if hint left us with no space for the requested
+ * mapping then try again:
+ *
+ * Note: this is different with the case of bottomup
+ * which does the fully line-search, but we use find_vma
+ * here that causes some holes skipped.
+ */
+ if (start_addr != mm->mmap_base) {
+ mm->free_area_cache = mm->mmap_base;
+ mm->cached_hole_size = 0;
+ goto try_again;
+ }
+
/*
* A failed mmap() very likely causes application failure,
* so fall back to the bottom-up function here. This scenario
--
1.7.7.5
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2012-01-13 11:50 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-13 11:44 [PATCH 1/5] hugetlbfs: fix hugetlb_get_unmapped_area Xiao Guangrong
2012-01-13 11:44 ` [PATCH 2/5] hugetlb: drop prev_vma in hugetlb_get_unmapped_area_topdown Xiao Guangrong
2012-03-07 22:01 ` Andrew Morton
2012-03-08 2:28 ` Xiao Guangrong
2012-01-13 11:45 ` [PATCH 3/5] hugetlb: try to search again if it is really needed Xiao Guangrong
2012-02-01 22:43 ` Andrew Morton
2012-02-02 5:19 ` Xiao Guangrong
2012-01-13 11:46 ` [PATCH 4/5] mm: do not reset cached_hole_size when vma is unmapped Xiao Guangrong
2012-01-13 11:47 ` Xiao Guangrong [this message]
2012-02-01 22:44 ` [PATCH 5/5] mm: search from free_area_cache for the bigger size Andrew Morton
2012-02-02 7:07 ` Xiao Guangrong
2012-01-31 6:05 ` [PATCH 1/5] hugetlbfs: fix hugetlb_get_unmapped_area Xiao Guangrong
2012-02-01 22:43 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F1019D3.8020709@linux.vnet.ibm.com \
--to=xiaoguangrong@linux.vnet.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=wli@holomorphy.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).