Re: [PATCH 1/1] ARM: tegra: bus_notifier registers IOMMU devices(was: How to specify IOMMU'able devices in DT)

[Mark Zhang <nvmarkzhang@gmail.com>]

On 11/28/2012 09:48 PM, Hiroshi Doyu wrote:
> Hiroshi Doyu <hdoyu@nvidia.com> wrote @ Mon, 24 Sep 2012 14:50:14 +0300 (EEST):
> ...
>>>>> On Mon, 2012-09-24 at 12:04 +0300, Hiroshi Doyu wrote:
>>>>>> diff --git a/drivers/base/platform.c b/drivers/base/platform.c
>>>>>> index a1a7225..9eae3be 100644
>>>>>> --- a/drivers/base/platform.c
>>>>>> +++ b/drivers/base/platform.c
>>>>>> @@ -21,6 +21,8 @@
>>>>>>  #include <linux/slab.h>
>>>>>>  #include <linux/pm_runtime.h>
>>>>>>
>>>>>> +#include <asm/dma-iommu.h>
>>>>>> +
>>>>>>  #include "base.h"
>>>>>>
>>>>>>  #define to_platform_driver(drv)        (container_of((drv), struct
>>>>>> platform_driver, \
>>>>>> @@ -305,8 +307,19 @@ int platform_device_add(struct platform_device
>>>>>> *pdev)
>>>>>>                  dev_name(&pdev->dev), dev_name(pdev->dev.parent));
>>>>>>
>>>>>>         ret = device_add(&pdev->dev);
>>>>>> -       if (ret == 0)
>>>>>> -               return ret;
>>>>>> +       if (ret)
>>>>>> +               goto failed;
>>>>>> +
>>>>>> +#ifdef CONFIG_PLATFORM_ENABLE_IOMMU
>>>>>> +       if (platform_bus_type.map && !pdev->dev.archdata.mapping) {
>>>>>> +               ret = arm_iommu_attach_device(&pdev->dev,
>>>>>> +                                             platform_bus_type.map);
>>>>>> +               if (ret)
>>>>>> +                       goto failed;
>>>>>
>>>>> This is horrible ... you're adding an architecture specific callback
>>>>> into our generic code; that's really a no-no.  If the concept of
>>>>> CONFIG_PLATFORM_ENABE_IOMMU is useful to more than just arm, then this
>>>>> could become a generic callback.
>>>>
>>>> As mentioned in the original, this is a heck to explain what is
>>>> needed. I am looking for some generic solution for how to specify
>>>> IOMMU info for each platform devices. I'm guessing that some other SoC
>>>> may have the similar requirements on the above. As you mentioned, this
>>>> solution should be a generic, not arch specific.
>>>
>>> Please read more about bus notifiers. IMHO a good example is provided in 
>>> the following thread:
>>> http://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg12238.html
>>
>> This bus notifier seems enough flexible to afford the variation of
>> IOMMU map info, like Tegra ASID, which could be platform-specific, and
>> the other could be common too. There's already iommu_bus_notifier
>> too. I'll try to implement something base on this.
> 
> Experimentally implemented as below. With the followig patch, each
> device could specify its own map in DT, and automatically the device
> would be attached to the map.
> 
> There is a case that some devices share a map. This patch doesn't
> suppor such case yet.
> 
> From 8cb75bb6f3a8535a077e0e85265f87c1f1289bfd Mon Sep 17 00:00:00 2001
> From: Hiroshi Doyu <hdoyu@nvidia.com>
> Date: Wed, 28 Nov 2012 14:47:04 +0200
> Subject: [PATCH 1/1] ARM: tegra: bus_notifier registers IOMMU devices
> 
> platform_bus notifier registers IOMMU devices if dma-window is
> specified.
> 
> Its format is:
>   dma-window = <"start" "size">;
> ex)
>   dma-window = <0x12345000 0x8000>;
> 
> Signed-off-by: Hiroshi Doyu <hdoyu@nvidia.com>
> ---
>  arch/arm/mach-tegra/board-dt-tegra30.c |   40 ++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm/mach-tegra/board-dt-tegra30.c b/arch/arm/mach-tegra/board-dt-tegra30.c
> index a2b6cf1..570d718 100644
> --- a/arch/arm/mach-tegra/board-dt-tegra30.c
> +++ b/arch/arm/mach-tegra/board-dt-tegra30.c
> @@ -30,9 +30,11 @@
>  #include <linux/of_fdt.h>
>  #include <linux/of_irq.h>
>  #include <linux/of_platform.h>
> +#include <linux/of_iommu.h>
>  
>  #include <asm/mach/arch.h>
>  #include <asm/hardware/gic.h>
> +#include <asm/dma-iommu.h>
>  
>  #include "board.h"
>  #include "clock.h"
> @@ -86,10 +88,48 @@ static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = {
>  	{ NULL,		NULL,		0,		0},
>  };
>  
> +#ifdef CONFIG_ARM_DMA_USE_IOMMU
> +static int tegra_iommu_device_notifier(struct notifier_block *nb,
> +				       unsigned long event, void *_dev)
> +{
> +	struct dma_iommu_mapping *map = NULL;
> +	struct device *dev = _dev;
> +	dma_addr_t base;
> +	size_t size;
> +	int err;
> +
> +	switch (event) {
> +	case BUS_NOTIFY_ADD_DEVICE:
> +		err = of_get_dma_window(dev->of_node, NULL, 0, NULL, &base,
> +					&size);
> +		if (!err)
> +			map = arm_iommu_create_mapping(&platform_bus_type,
> +						       base, size, 0);
> +		if (IS_ERR_OR_NULL(map))
> +			break;
> +		if (arm_iommu_attach_device(dev, map))

Add "arm_iommu_release_mapping" here.

And finally we see this patch, that's great. :)

> +			dev_err(dev, "Failed to attach %s\n", dev_name(dev));
> +		dev_dbg(dev, "Attached %s to map %p\n", dev_name(dev), map);
> +		break;
> +	}
> +	return NOTIFY_DONE;
> +}
> +#else
> +#define tegra_iommu_device_notifier NULL
> +#endif
> +
> +static struct notifier_block tegra_iommu_device_nb = {
> +	.notifier_call = tegra_iommu_device_notifier,
> +};
> +
>  static void __init tegra30_dt_init(void)
>  {
>  	tegra_clk_init_from_table(tegra_dt_clk_init_table);
>  
> +	if (IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU))
> +		bus_register_notifier(&platform_bus_type,
> +				      &tegra_iommu_device_nb);
> +
>  	of_platform_populate(NULL, of_default_bus_match_table,
>  				tegra30_auxdata_lookup, NULL);
>  }
> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>