From: Hush Bensen <hush.bensen@gmail.com>
To: Jianguo Wu <wujianguo@huawei.com>,
linux-mm@kvack.org,
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
Hugh Dickins <hughd@google.com>, Dave Hansen <dave@sr71.net>,
Andi Kleen <ak@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>, qiuxishi <qiuxishi@huawei.com>
Subject: Re: Transparent Hugepage impact on memcpy
Date: Tue, 04 Jun 2013 22:10:51 +0800 [thread overview]
Message-ID: <51ADF56B.2060407@gmail.com> (raw)
In-Reply-To: <51ADAC15.1050103@huawei.com>
Cc thp guys.
ao? 2013/6/4 16:57, Jianguo Wu a??e??:
> Hi all,
>
> I tested memcpy with perf bench, and found that in prefault case, When Transparent Hugepage is on,
> memcpy has worse performance.
>
> When THP on is 3.672879 GB/Sec (with prefault), while THP off is 6.190187 GB/Sec (with prefault).
>
> I think THP will improve performance, but the test result obviously not the case.
> Andrea mentioned THP cause "clear_page/copy_page less cache friendly" in
> http://events.linuxfoundation.org/slides/2011/lfcs/lfcs2011_hpc_arcangeli.pdf.
>
> I am not quite understand this, could you please give me some comments, Thanks!
>
> I test in Linux-3.4-stable, and my machine info is:
> Intel(R) Xeon(R) CPU E5520 @ 2.27GHz
>
> available: 2 nodes (0-1)
> node 0 cpus: 0 1 2 3 8 9 10 11
> node 0 size: 24567 MB
> node 0 free: 23550 MB
> node 1 cpus: 4 5 6 7 12 13 14 15
> node 1 size: 24576 MB
> node 1 free: 23767 MB
> node distances:
> node 0 1
> 0: 10 20
> 1: 20 10
>
> Below is test result:
> ---with THP---
> #cat /sys/kernel/mm/transparent_hugepage/enabled
> [always] madvise never
> #./perf bench mem memcpy -l 1gb -o
> # Running mem/memcpy benchmark...
> # Copying 1gb Bytes ...
>
> 3.672879 GB/Sec (with prefault)
>
> #./perf stat ...
> Performance counter stats for './perf bench mem memcpy -l 1gb -o':
>
> 35455940 cache-misses # 53.504 % of all cache refs [49.45%]
> 66267785 cache-references [49.78%]
> 2409 page-faults
> 450768651 dTLB-loads
> [50.78%]
> 24580 dTLB-misses
> # 0.01% of all dTLB cache hits [51.01%]
> 1338974202 dTLB-stores
> [50.63%]
> 77943 dTLB-misses
> [50.24%]
> 697404997 iTLB-loads
> [49.77%]
> 274 iTLB-misses
> # 0.00% of all iTLB cache hits [49.30%]
>
> 0.855041819 seconds time elapsed
>
> ---no THP---
> #cat /sys/kernel/mm/transparent_hugepage/enabled
> always madvise [never]
>
> #./perf bench mem memcpy -l 1gb -o
> # Running mem/memcpy benchmark...
> # Copying 1gb Bytes ...
>
> 6.190187 GB/Sec (with prefault)
>
> #./perf stat ...
> Performance counter stats for './perf bench mem memcpy -l 1gb -o':
>
> 16920763 cache-misses # 98.377 % of all cache refs [50.01%]
> 17200000 cache-references [50.04%]
> 524652 page-faults
> 734365659 dTLB-loads
> [50.04%]
> 4986387 dTLB-misses
> # 0.68% of all dTLB cache hits [50.04%]
> 1013408298 dTLB-stores
> [50.04%]
> 8180817 dTLB-misses
> [49.97%]
> 1526642351 iTLB-loads
> [50.41%]
> 56 iTLB-misses
> # 0.00% of all iTLB cache hits [50.21%]
>
> 1.025425847 seconds time elapsed
>
> Thanks,
> Jianguo Wu.
>
> --
> To unsubscribe, send a message with 'unsubscribe linux-mm' in
> the body to majordomo@kvack.org. For more info on Linux MM,
> see: http://www.linux-mm.org/ .
> Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2013-06-04 14:12 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-04 8:57 Transparent Hugepage impact on memcpy Jianguo Wu
2013-06-04 12:30 ` Wanpeng Li
2013-06-04 20:20 ` Andrea Arcangeli
2013-06-05 2:49 ` Jianguo Wu
2013-06-04 12:30 ` Wanpeng Li
[not found] ` <51adde12.e6b2320a.610d.ffff96f3SMTPIN_ADDED_BROKEN@mx.google.com>
2013-06-04 12:55 ` Jianguo Wu
2013-06-04 14:10 ` Hush Bensen [this message]
2013-06-05 3:26 ` Jianguo Wu
2013-06-06 13:54 ` Hitoshi Mitake
2013-06-07 1:26 ` Jianguo Wu
2013-06-07 13:50 ` Hitoshi Mitake
2013-06-08 1:13 ` Jianguo Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51ADF56B.2060407@gmail.com \
--to=hush.bensen@gmail.com \
--cc=aarcange@redhat.com \
--cc=ak@linux.intel.com \
--cc=dave@sr71.net \
--cc=hughd@google.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-mm@kvack.org \
--cc=qiuxishi@huawei.com \
--cc=wujianguo@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).