From: Zhang Zhen <zhenzhang.zhang@huawei.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Dave Hansen <dave.hansen@intel.com>,
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>,
Toshi Kani <toshi.kani@hp.com>,
David Rientjes <rientjes@google.com>
Cc: wangnan0@huawei.com, linux-kernel@vger.kernel.org,
Linux MM <linux-mm@kvack.org>
Subject: [PATCH] memory-hotplug: fix not enough check of valid_zones
Date: Tue, 26 Aug 2014 17:57:24 +0800 [thread overview]
Message-ID: <53FC5A04.9070300@huawei.com> (raw)
In-Reply-To: <1409046575-11025-1-git-send-email-zhenzhang.zhang@huawei.com>
As Yasuaki Ishimatsu described the check here is not enough
if memory has hole as follows:
PFN 0x00 0xd0 0xe0 0xf0
+-------------+-------------+-------------+
zone type | Normal | hole | Normal |
+-------------+-------------+-------------+
In this case, the check can't guarantee that this is "the last
block of memory".
The check of ZONE_MOVABLE has the same problem.
Change the interface name to valid_zones according to most pepole's
suggestion.
Sample output of the sysfs files:
memory0/valid_zones: none
memory1/valid_zones: DMA32
memory2/valid_zones: DMA32
memory3/valid_zones: DMA32
memory4/valid_zones: Normal
memory5/valid_zones: Normal
memory6/valid_zones: Normal Movable
memory7/valid_zones: Movable Normal
memory8/valid_zones: Movable
Signed-off-by: Zhang Zhen <zhenzhang.zhang@huawei.com>
---
Documentation/ABI/testing/sysfs-devices-memory | 8 ++---
Documentation/memory-hotplug.txt | 4 +--
drivers/base/memory.c | 42 ++++++--------------------
3 files changed, 15 insertions(+), 39 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-devices-memory b/Documentation/ABI/testing/sysfs-devices-memory
index 2b2a1d7..deef3b5 100644
--- a/Documentation/ABI/testing/sysfs-devices-memory
+++ b/Documentation/ABI/testing/sysfs-devices-memory
@@ -61,13 +61,13 @@ Users: hotplug memory remove tools
http://www.ibm.com/developerworks/wikis/display/LinuxP/powerpc-utils
-What: /sys/devices/system/memory/memoryX/zones_online_to
+What: /sys/devices/system/memory/memoryX/valid_zones
Date: July 2014
Contact: Zhang Zhen <zhenzhang.zhang@huawei.com>
Description:
- The file /sys/devices/system/memory/memoryX/zones_online_to
- is read-only and is designed to show which zone this memory block can
- be onlined to.
+ The file /sys/devices/system/memory/memoryX/valid_zones is
+ read-only and is designed to show which zone this memory
+ block can be onlined to.
What: /sys/devices/system/memoryX/nodeY
Date: October 2009
diff --git a/Documentation/memory-hotplug.txt b/Documentation/memory-hotplug.txt
index 5b34e33..947229c 100644
--- a/Documentation/memory-hotplug.txt
+++ b/Documentation/memory-hotplug.txt
@@ -155,7 +155,7 @@ Under each memory block, you can see 4 files:
/sys/devices/system/memory/memoryXXX/phys_device
/sys/devices/system/memory/memoryXXX/state
/sys/devices/system/memory/memoryXXX/removable
-/sys/devices/system/memory/memoryXXX/zones_online_to
+/sys/devices/system/memory/memoryXXX/valid_zones
'phys_index' : read-only and contains memory block id, same as XXX.
'state' : read-write
@@ -171,7 +171,7 @@ Under each memory block, you can see 4 files:
block is removable and a value of 0 indicates that
it is not removable. A memory block is removable only if
every section in the block is removable.
-'zones_online_to' : read-only: designed to show which zone this memory block
+'valid_zones' : read-only: designed to show which zone this memory block
can be onlined to.
NOTE:
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index ccaf37c..efd456c 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -374,21 +374,7 @@ static ssize_t show_phys_device(struct device *dev,
}
#ifdef CONFIG_MEMORY_HOTREMOVE
-static int __zones_online_to(unsigned long end_pfn,
- struct page *first_page, unsigned long nr_pages)
-{
- struct zone *zone_next;
-
- /* The mem block is the last block of memory. */
- if (!pfn_valid(end_pfn + 1))
- return 1;
- zone_next = page_zone(first_page + nr_pages);
- if (zone_idx(zone_next) == ZONE_MOVABLE)
- return 1;
- return 0;
-}
-
-static ssize_t show_zones_online_to(struct device *dev,
+static ssize_t show_valid_zones(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct memory_block *mem = to_memory_block(dev);
@@ -407,33 +393,23 @@ static ssize_t show_zones_online_to(struct device *dev,
zone = page_zone(first_page);
-#ifdef CONFIG_HIGHMEM
- if (zone_idx(zone) == ZONE_HIGHMEM) {
- if (__zones_online_to(end_pfn, first_page, nr_pages))
+ if (zone_idx(zone) == ZONE_MOVABLE - 1) {
+ /*The mem block is the last memoryblock of this zone.*/
+ if (end_pfn == zone_end_pfn(zone))
return sprintf(buf, "%s %s\n",
zone->name, (zone + 1)->name);
}
-#else
- if (zone_idx(zone) == ZONE_NORMAL) {
- if (__zones_online_to(end_pfn, first_page, nr_pages))
- return sprintf(buf, "%s %s\n",
- zone->name, (zone + 1)->name);
- }
-#endif
if (zone_idx(zone) == ZONE_MOVABLE) {
- if (!pfn_valid(start_pfn - nr_pages))
- return sprintf(buf, "%s %s\n",
- zone->name, (zone - 1)->name);
- zone_prev = page_zone(first_page - nr_pages);
- if (zone_idx(zone_prev) != ZONE_MOVABLE)
+ /*The mem block is the first memoryblock of ZONE_MOVABLE.*/
+ if (start_pfn == zone->zone_start_pfn)
return sprintf(buf, "%s %s\n",
- zone->name, (zone - 1)->name);
+ zone->name, (zone - 1)->name);
}
return sprintf(buf, "%s\n", zone->name);
}
-static DEVICE_ATTR(zones_online_to, 0444, show_zones_online_to, NULL);
+static DEVICE_ATTR(valid_zones, 0444, show_valid_zones, NULL);
#endif
static DEVICE_ATTR(phys_index, 0444, show_mem_start_phys_index, NULL);
@@ -587,7 +563,7 @@ static struct attribute *memory_memblk_attrs[] = {
&dev_attr_phys_device.attr,
&dev_attr_removable.attr,
#ifdef CONFIG_MEMORY_HOTREMOVE
- &dev_attr_zones_online_to.attr,
+ &dev_attr_valid_zones.attr,
#endif
NULL
};
--
1.8.1.4
.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next parent reply other threads:[~2014-08-26 9:59 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <1409046575-11025-1-git-send-email-zhenzhang.zhang@huawei.com>
2014-08-26 9:57 ` Zhang Zhen [this message]
2014-08-26 10:23 ` [PATCH] memory-hotplug: fix not enough check of valid_zones Yasuaki Ishimatsu
2014-08-27 1:55 ` Zhang Zhen
2014-08-27 3:22 ` Yasuaki Ishimatsu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=53FC5A04.9070300@huawei.com \
--to=zhenzhang.zhang@huawei.com \
--cc=akpm@linux-foundation.org \
--cc=dave.hansen@intel.com \
--cc=isimatu.yasuaki@jp.fujitsu.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=rientjes@google.com \
--cc=toshi.kani@hp.com \
--cc=wangnan0@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).