From: Xishi Qiu <qiuxishi@huawei.com>
To: Tang Chen <tangchen@cn.fujitsu.com>
Cc: akpm@linux-foundation.org, santosh.shilimkar@ti.com,
grygorii.strashko@ti.com, yinghai@kernel.org,
isimatu.yasuaki@jp.fujitsu.co, fabf@skynet.be, nzimmer@sgi.com,
wangnan0@huawei.com, vdavydov@parallels.com, toshi.kani@hp.com,
phacht@linux.vnet.ibm.com, tj@kernel.org,
kirill.shutemov@linux.intel.com, riel@redhat.com,
luto@amacapital.net, hpa@linux.intel.com, aarcange@redhat.com,
mgorman@suse.de, rientjes@google.com, hannes@cmpxchg.org,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Subject: Re: [PATCH 1/2] mem-hotplug: Reset node managed pages when hot-adding a new pgdat.
Date: Tue, 4 Nov 2014 09:50:27 +0800 [thread overview]
Message-ID: <545830E3.1020907@huawei.com> (raw)
In-Reply-To: <1414748812-22610-2-git-send-email-tangchen@cn.fujitsu.com>
On 2014/10/31 17:46, Tang Chen wrote:
> In free_area_init_core(), zone->managed_pages is set to an approximate
> value for lowmem, and will be adjusted when the bootmem allocator frees
> pages into the buddy system. But free_area_init_core() is also called
> by hotadd_new_pgdat() when hot-adding memory. As a result, zone->managed_pages
> of the newly added node's pgdat is set to an approximate value in the
> very beginning. Even if the memory on that node has node been onlined,
> /sys/device/system/node/nodeXXX/meminfo has wrong value.
>
> hot-add node2 (memory not onlined)
> cat /sys/device/system/node/node2/meminfo
> Node 2 MemTotal: 33554432 kB
> Node 2 MemFree: 0 kB
> Node 2 MemUsed: 33554432 kB
> Node 2 Active: 0 kB
>
> This patch fixes this problem by reset node managed pages to 0 after hot-adding
> a new node.
>
> 1. Move reset_managed_pages_done from reset_node_managed_pages() to reset_all_zones_managed_pages()
> 2. Make reset_node_managed_pages() non-static
> 3. Call reset_node_managed_pages() in hotadd_new_pgdat() after pgdat is initialized
>
> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com>
> Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
> ---
> include/linux/bootmem.h | 1 +
> mm/bootmem.c | 9 +++++----
> mm/memory_hotplug.c | 9 +++++++++
> mm/nobootmem.c | 8 +++++---
> 4 files changed, 20 insertions(+), 7 deletions(-)
>
> diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h
> index 4e2bd4c..0995c2d 100644
> --- a/include/linux/bootmem.h
> +++ b/include/linux/bootmem.h
> @@ -46,6 +46,7 @@ extern unsigned long init_bootmem_node(pg_data_t *pgdat,
> extern unsigned long init_bootmem(unsigned long addr, unsigned long memend);
>
> extern unsigned long free_all_bootmem(void);
> +extern void reset_node_managed_pages(pg_data_t *pgdat);
> extern void reset_all_zones_managed_pages(void);
>
> extern void free_bootmem_node(pg_data_t *pgdat,
> diff --git a/mm/bootmem.c b/mm/bootmem.c
> index 8a000ce..477be69 100644
> --- a/mm/bootmem.c
> +++ b/mm/bootmem.c
> @@ -243,13 +243,10 @@ static unsigned long __init free_all_bootmem_core(bootmem_data_t *bdata)
>
> static int reset_managed_pages_done __initdata;
>
> -static inline void __init reset_node_managed_pages(pg_data_t *pgdat)
> +void reset_node_managed_pages(pg_data_t *pgdat)
> {
> struct zone *z;
>
> - if (reset_managed_pages_done)
> - return;
> -
> for (z = pgdat->node_zones; z < pgdat->node_zones + MAX_NR_ZONES; z++)
> z->managed_pages = 0;
> }
> @@ -258,8 +255,12 @@ void __init reset_all_zones_managed_pages(void)
> {
> struct pglist_data *pgdat;
>
> + if (reset_managed_pages_done)
> + return;
> +
> for_each_online_pgdat(pgdat)
> reset_node_managed_pages(pgdat);
> +
> reset_managed_pages_done = 1;
> }
>
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 29d8693..3ab01b2 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -31,6 +31,7 @@
> #include <linux/stop_machine.h>
> #include <linux/hugetlb.h>
> #include <linux/memblock.h>
> +#include <linux/bootmem.h>
>
> #include <asm/tlbflush.h>
>
> @@ -1096,6 +1097,14 @@ static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start)
> build_all_zonelists(pgdat, NULL);
> mutex_unlock(&zonelists_mutex);
>
> + /*
> + * zone->managed_pages is set to an approximate value in
> + * free_area_init_core(), which will cause
> + * /sys/device/system/node/nodeX/meminfo has wrong data.
> + * So reset it to 0 before any memory is onlined.
> + */
> + reset_node_managed_pages(pgdat);
> +
I aggree with you, we should reset it before online pages.
Thanks,
Xishi Qiu
> return pgdat;
> }
>
> diff --git a/mm/nobootmem.c b/mm/nobootmem.c
> index 7c7ab32..90b5046 100644
> --- a/mm/nobootmem.c
> +++ b/mm/nobootmem.c
> @@ -145,12 +145,10 @@ static unsigned long __init free_low_memory_core_early(void)
>
> static int reset_managed_pages_done __initdata;
>
> -static inline void __init reset_node_managed_pages(pg_data_t *pgdat)
> +void reset_node_managed_pages(pg_data_t *pgdat)
> {
> struct zone *z;
>
> - if (reset_managed_pages_done)
> - return;
> for (z = pgdat->node_zones; z < pgdat->node_zones + MAX_NR_ZONES; z++)
> z->managed_pages = 0;
> }
> @@ -159,8 +157,12 @@ void __init reset_all_zones_managed_pages(void)
> {
> struct pglist_data *pgdat;
>
> + if (reset_managed_pages_done)
> + return;
> +
> for_each_online_pgdat(pgdat)
> reset_node_managed_pages(pgdat);
> +
> reset_managed_pages_done = 1;
> }
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2014-11-04 1:53 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-31 9:46 [PATCH 0/2] Fix node meminfo corruption Tang Chen
2014-10-31 9:46 ` [PATCH 1/2] mem-hotplug: Reset node managed pages when hot-adding a new pgdat Tang Chen
2014-11-04 1:50 ` Xishi Qiu [this message]
2014-10-31 9:46 ` [PATCH 2/2] mem-hotplug: Fix wrong check for zone->pageset initialization in online_pages() Tang Chen
2014-11-04 8:10 ` Yasuaki Ishimatsu
2014-11-04 8:46 ` Tang Chen
2014-11-05 1:01 ` Kamezawa Hiroyuki
2014-11-05 2:17 ` Tang Chen
2014-11-04 1:10 ` [PATCH 0/2] Fix node meminfo corruption Tang Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=545830E3.1020907@huawei.com \
--to=qiuxishi@huawei.com \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=fabf@skynet.be \
--cc=grygorii.strashko@ti.com \
--cc=hannes@cmpxchg.org \
--cc=hpa@linux.intel.com \
--cc=isimatu.yasuaki@jp.fujitsu.co \
--cc=isimatu.yasuaki@jp.fujitsu.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=luto@amacapital.net \
--cc=mgorman@suse.de \
--cc=nzimmer@sgi.com \
--cc=phacht@linux.vnet.ibm.com \
--cc=riel@redhat.com \
--cc=rientjes@google.com \
--cc=santosh.shilimkar@ti.com \
--cc=tangchen@cn.fujitsu.com \
--cc=tj@kernel.org \
--cc=toshi.kani@hp.com \
--cc=vdavydov@parallels.com \
--cc=wangnan0@huawei.com \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).