From: "David Hildenbrand (Arm)" <david@kernel.org>
To: Usama Arif <usama.arif@linux.dev>,
Andrew Morton <akpm@linux-foundation.org>,
baohua@kernel.org, baolin.wang@linux.alibaba.com,
dev.jain@arm.com, lance.yang@linux.dev, liam@infradead.org,
linux-kernel@vger.kernel.org, linux-mm@kvack.org, ljs@kernel.org,
nico.pache@linux.dev, ryan.roberts@arm.com, ziy@nvidia.com,
kas@kernel.org, nphamcs@gmail.com, hannes@cmpxchg.org,
riel@surriel.com, shakeel.butt@linux.dev, kernel-team@meta.com
Cc: stable@vger.kernel.org
Subject: Re: [PATCH] mm/huge_memory: transfer the pmd dirty bit to the folio on zap
Date: Wed, 19 Aug 2026 16:13:02 +0200 [thread overview]
Message-ID: <54d45248-1a06-43db-b71b-3d5e0fda9de4@kernel.org> (raw)
In-Reply-To: <20260819101222.3732660-1-usama.arif@linux.dev>
On 8/19/26 12:12, Usama Arif wrote:
> zap_huge_pmd_folio() propagates the pmd young bit to the folio for the
> file case, but not the dirty bit. The pte path does propagate it, in
> zap_present_folio_ptes() and so does the pmd split path, in
> __split_huge_pmd_locked().
>
> For most file mappings the omission is harmless, because writing to a
> shared file mapping goes through page_mkwrite(), which dirties the
> folio. tmpfs is different: it has no page_mkwrite(), and
> vma_wants_writenotify() is false for it, so a *read* fault on a
> MAP_SHARED tmpfs mapping installs a writable pmd via do_read_fault().
> do_read_fault() does not call fault_dirty_shared_page(), so subsequent
> stores through that mapping set only the hardware dirty bit in the pmd
> and never call folio_mark_dirty(). A shmem folio allocated by a fault
> is marked uptodate but not dirty (see the clear: block in
> shmem_get_folio_gfp()), so PG_dirty is never set at all.
>
> Unmapping such a folio - munmap(), or exit_mmap() when the process dies
> - then loses the only record that it was written, because zap_huge_pmd()
> drops the pmd without transferring the dirty bit. Reclaim afterwards
> sees a clean shmem folio: the whole swap-out block in
> shrink_folio_list() is inside "if (folio_test_dirty(folio))", so
> pageout() is skipped and the folio falls into __remove_mapping().
> There, folio_is_file_lru() is false for a swapbacked folio, so no shadow
> entry is created and __filemap_remove_folio(folio, NULL) simply empties
> the i_pages slot. The data is freed without ever being written to swap,
> and the next fault on that index returns a freshly zeroed folio.
>
> This is silent data loss for any process that keeps state in a
> MAP_SHARED tmpfs segment across an unmap - for example a cache handed
> from one process generation to the next through /dev/shm. It requires
> the folio to be PMD-mapped, so it only shows up once shmem THP is
> enabled (which is what we did in Meta fleet and started noticing crashes);
> with THP off the pte path transfers the dirty bit correctly.
> It also only becomes visible when swap is enabled, because with no swap
> device shmem folios (which are on the anon LRU) are not scanned by
> reclaim at all, so the clean folio is never dropped.
>
> Reproduced on x86_64 with a tmpfs mounted huge=within_size: read-fault a
> 2MB-backed region, write a known pattern through the resulting mapping,
> munmap, force reclaim of the cgroup, then re-map and read back. Without
> this patch the region reads back as zeros and vmstat shows zswpout 0 -
> the data was discarded rather than swapped. With this patch the region
> reads back correctly and the pages are swapped out as expected. With
> huge=never, or when the first touch is a write, the test passes either
> way.
>
> Fixes: 800d8c63b2e9 ("shmem: add huge pages support")
> Cc: <stable@vger.kernel.org>
> Signed-off-by: Usama Arif <usama.arif@linux.dev>
> ---
> mm/huge_memory.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> index ced400f72d43a..afbb5974bd225 100644
> --- a/mm/huge_memory.c
> +++ b/mm/huge_memory.c
> @@ -2449,6 +2449,8 @@ static void zap_huge_pmd_folio(struct mm_struct *mm, struct vm_area_struct *vma,
> add_mm_counter(mm, mm_counter_file(folio),
> -HPAGE_PMD_NR);
>
> + if (is_present && pmd_dirty(pmdval))
> + folio_mark_dirty(folio);
We don't need that for anon folios, though. So best to just resemble
zap_present_folio_ptes() logic and do it only for !anon folios?
--
Cheers,
David
next prev parent reply other threads:[~2026-08-19 14:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-19 10:12 [PATCH] mm/huge_memory: transfer the pmd dirty bit to the folio on zap Usama Arif
2026-08-19 14:13 ` David Hildenbrand (Arm) [this message]
2026-08-19 14:13 ` David Hildenbrand (Arm)
2026-08-19 14:31 ` Kiryl Shutsemau
2026-08-19 16:17 ` Lance Yang
2026-08-19 16:32 ` Usama Arif
2026-08-19 16:35 ` Pedro Falcato
2026-08-19 20:33 ` Hugh Dickins
2026-08-19 15:10 ` Lance Yang
2026-08-19 15:31 ` Zi Yan
2026-08-19 16:09 ` Lorenzo Stoakes (ARM)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=54d45248-1a06-43db-b71b-3d5e0fda9de4@kernel.org \
--to=david@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=baohua@kernel.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=dev.jain@arm.com \
--cc=hannes@cmpxchg.org \
--cc=kas@kernel.org \
--cc=kernel-team@meta.com \
--cc=lance.yang@linux.dev \
--cc=liam@infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=ljs@kernel.org \
--cc=nico.pache@linux.dev \
--cc=nphamcs@gmail.com \
--cc=riel@surriel.com \
--cc=ryan.roberts@arm.com \
--cc=shakeel.butt@linux.dev \
--cc=stable@vger.kernel.org \
--cc=usama.arif@linux.dev \
--cc=ziy@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox