From: Xishi Qiu <qiuxishi@huawei.com>
To: Andrew Morton <akpm@linux-foundation.org>,
"H. Peter Anvin" <hpa@zytor.com>, Ingo Molnar <mingo@kernel.org>,
"Luck, Tony" <tony.luck@intel.com>,
Hanjun Guo <guohanjun@huawei.com>, Xiexiuqi <xiexiuqi@huawei.com>,
leon@leon.nu, Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>,
Dave Hansen <dave.hansen@intel.com>,
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>,
Vlastimil Babka <vbabka@suse.cz>, Mel Gorman <mgorman@suse.de>
Cc: Xishi Qiu <qiuxishi@huawei.com>, Linux MM <linux-mm@kvack.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: [RFC v2 PATCH 4/8] mm: add mirrored memory to buddy system
Date: Sat, 27 Jun 2015 10:25:37 +0800 [thread overview]
Message-ID: <558E09A1.2090102@huawei.com> (raw)
In-Reply-To: <558E084A.60900@huawei.com>
Before free bootmem, set mirrored pageblock's migratetype to MIGRATE_MIRROR, so
they could free to buddy system's MIGRATE_MIRROR list.
When set reserved memory, skip the mirrored memory.
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
---
include/linux/memblock.h | 3 +++
mm/memblock.c | 21 +++++++++++++++++++++
mm/nobootmem.c | 3 +++
mm/page_alloc.c | 3 +++
4 files changed, 30 insertions(+)
diff --git a/include/linux/memblock.h b/include/linux/memblock.h
index 97f71ca..53be030 100644
--- a/include/linux/memblock.h
+++ b/include/linux/memblock.h
@@ -81,6 +81,9 @@ int memblock_mark_hotplug(phys_addr_t base, phys_addr_t size);
int memblock_clear_hotplug(phys_addr_t base, phys_addr_t size);
int memblock_mark_mirror(phys_addr_t base, phys_addr_t size);
ulong choose_memblock_flags(void);
+#ifdef CONFIG_MEMORY_MIRROR
+void memblock_mark_migratemirror(void);
+#endif
/* Low level functions */
int memblock_add_range(struct memblock_type *type,
diff --git a/mm/memblock.c b/mm/memblock.c
index 7612876..0d0b210 100644
--- a/mm/memblock.c
+++ b/mm/memblock.c
@@ -19,6 +19,7 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
#include <linux/memblock.h>
+#include <linux/page-isolation.h>
#include <asm-generic/sections.h>
#include <linux/io.h>
@@ -818,6 +819,26 @@ int __init_memblock memblock_mark_mirror(phys_addr_t base, phys_addr_t size)
return memblock_setclr_flag(base, size, 1, MEMBLOCK_MIRROR);
}
+#ifdef CONFIG_MEMORY_MIRROR
+void __init_memblock memblock_mark_migratemirror(void)
+{
+ unsigned long start_pfn, end_pfn, pfn;
+ int i, node;
+ struct page *page;
+
+ printk(KERN_DEBUG "Mirrored memory:\n");
+ for_each_mirror_pfn_range(i, MAX_NUMNODES, &start_pfn, &end_pfn,
+ &node) {
+ printk(KERN_DEBUG " node %3d: [mem %#010llx-%#010llx]\n",
+ node, PFN_PHYS(start_pfn), PFN_PHYS(end_pfn) - 1);
+ for (pfn = start_pfn; pfn < end_pfn;
+ pfn += pageblock_nr_pages) {
+ page = pfn_to_page(pfn);
+ set_pageblock_migratetype(page, MIGRATE_MIRROR);
+ }
+ }
+}
+#endif
/**
* __next__mem_range - next function for for_each_free_mem_range() etc.
diff --git a/mm/nobootmem.c b/mm/nobootmem.c
index 5258386..31aa6d4 100644
--- a/mm/nobootmem.c
+++ b/mm/nobootmem.c
@@ -129,6 +129,9 @@ static unsigned long __init free_low_memory_core_early(void)
u64 i;
memblock_clear_hotplug(0, -1);
+#ifdef CONFIG_MEMORY_MIRROR
+ memblock_mark_migratemirror();
+#endif
for_each_free_mem_range(i, NUMA_NO_NODE, MEMBLOCK_NONE, &start, &end,
NULL)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index 6e4d79f..aea78a5 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -4118,6 +4118,9 @@ static void setup_zone_migrate_reserve(struct zone *zone)
block_migratetype = get_pageblock_migratetype(page);
+ if (is_migrate_mirror(block_migratetype))
+ continue;
+
/* Only test what is necessary when the reserves are not met */
if (reserve > 0) {
/*
--
2.0.0
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2015-06-27 2:30 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-27 2:19 [RFC v2 PATCH 0/8] mm: mirrored memory support for page buddy allocations Xishi Qiu
2015-06-27 2:23 ` [RFC v2 PATCH 1/8] mm: add a new config to manage the code Xishi Qiu
2015-06-29 6:50 ` Kamezawa Hiroyuki
2015-06-30 2:52 ` Xishi Qiu
2015-06-27 2:24 ` [RFC v2 PATCH 2/8] mm: introduce MIGRATE_MIRROR to manage the mirrored pages Xishi Qiu
2015-06-29 7:32 ` Kamezawa Hiroyuki
2015-06-30 2:45 ` Xishi Qiu
2015-06-30 7:53 ` Kamezawa Hiroyuki
2015-06-30 9:22 ` Xishi Qiu
2015-06-27 2:24 ` [RFC v2 PATCH 3/8] mm: find mirrored memory in memblock Xishi Qiu
2015-06-27 2:25 ` Xishi Qiu [this message]
2015-06-29 7:39 ` [RFC v2 PATCH 4/8] mm: add mirrored memory to buddy system Kamezawa Hiroyuki
2015-06-27 2:26 ` [RFC v2 PATCH 5/8] mm: introduce a new zone_stat_item NR_FREE_MIRROR_PAGES Xishi Qiu
2015-06-27 2:27 ` [RFC v2 PATCH 6/8] mm: add free mirrored pages info Xishi Qiu
2015-06-27 2:27 ` [RFC v2 PATCH 7/8] mm: add the buddy system interface Xishi Qiu
2015-06-29 23:11 ` Luck, Tony
2015-06-30 1:01 ` Kamezawa Hiroyuki
2015-06-30 1:31 ` Xishi Qiu
2015-06-30 2:01 ` Kamezawa Hiroyuki
2015-06-27 2:28 ` [RFC v2 PATCH 8/8] mm: add the PCP interface Xishi Qiu
2015-06-29 15:19 ` [RFC v2 PATCH 0/8] mm: mirrored memory support for page buddy allocations Dave Hansen
2015-06-30 1:26 ` Xishi Qiu
2015-06-30 1:52 ` Dave Hansen
2015-06-30 2:48 ` Xishi Qiu
2015-06-30 9:41 ` Mel Gorman
2015-06-30 10:46 ` Ingo Molnar
2015-06-30 11:53 ` Mel Gorman
2015-06-30 18:12 ` Luck, Tony
2015-07-13 4:56 ` Xishi Qiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=558E09A1.2090102@huawei.com \
--to=qiuxishi@huawei.com \
--cc=akpm@linux-foundation.org \
--cc=dave.hansen@intel.com \
--cc=guohanjun@huawei.com \
--cc=hpa@zytor.com \
--cc=kamezawa.hiroyu@jp.fujitsu.com \
--cc=leon@leon.nu \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mgorman@suse.de \
--cc=mingo@kernel.org \
--cc=n-horiguchi@ah.jp.nec.com \
--cc=tony.luck@intel.com \
--cc=vbabka@suse.cz \
--cc=xiexiuqi@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).