From: David Vrabel <david.vrabel@citrix.com>
To: David Vrabel <david.vrabel@citrix.com>,
linux-kernel@vger.kernel.org, xen-devel@lists.xenproject.org
Cc: Daniel Kiper <daniel.kiper@oracle.com>,
linux-mm@kvack.org, Boris Ostrovsky <boris.ostrovsky@oracle.com>,
Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [Xen-devel] [PATCHv3 01/10] mm: memory hotplug with an existing resource
Date: Thu, 13 Aug 2015 11:21:43 +0100 [thread overview]
Message-ID: <55CC6FB7.4080600@citrix.com> (raw)
In-Reply-To: <1438275792-5726-2-git-send-email-david.vrabel@citrix.com>
On 30/07/15 18:03, David Vrabel wrote:
> Add add_memory_resource() to add memory using an existing "System RAM"
> resource. This is useful if the memory region is being located by
> finding a free resource slot with allocate_resource().
>
> Xen guests will make use of this in their balloon driver to hotplug
> arbitrary amounts of memory in response to toolstack requests.
Ping? This enables a useful feature for Xen guests.
> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> ---
> include/linux/memory_hotplug.h | 2 ++
> mm/memory_hotplug.c | 28 +++++++++++++++++++++-------
> 2 files changed, 23 insertions(+), 7 deletions(-)
>
> diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
> index 6ffa0ac..c76d371 100644
> --- a/include/linux/memory_hotplug.h
> +++ b/include/linux/memory_hotplug.h
> @@ -11,6 +11,7 @@ struct zone;
> struct pglist_data;
> struct mem_section;
> struct memory_block;
> +struct resource;
>
> #ifdef CONFIG_MEMORY_HOTPLUG
>
> @@ -266,6 +267,7 @@ static inline void remove_memory(int nid, u64 start, u64 size) {}
> extern int walk_memory_range(unsigned long start_pfn, unsigned long end_pfn,
> void *arg, int (*func)(struct memory_block *, void *));
> extern int add_memory(int nid, u64 start, u64 size);
> +extern int add_memory_resource(int nid, struct resource *resource);
> extern int zone_for_memory(int nid, u64 start, u64 size, int zone_default);
> extern int arch_add_memory(int nid, u64 start, u64 size);
> extern int offline_pages(unsigned long start_pfn, unsigned long nr_pages);
> diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
> index 003dbe4..169770a 100644
> --- a/mm/memory_hotplug.c
> +++ b/mm/memory_hotplug.c
> @@ -1224,23 +1224,21 @@ int zone_for_memory(int nid, u64 start, u64 size, int zone_default)
> }
>
> /* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
> -int __ref add_memory(int nid, u64 start, u64 size)
> +int __ref add_memory_resource(int nid, struct resource *res)
> {
> + u64 start, size;
> pg_data_t *pgdat = NULL;
> bool new_pgdat;
> bool new_node;
> - struct resource *res;
> int ret;
>
> + start = res->start;
> + size = resource_size(res);
> +
> ret = check_hotplug_memory_range(start, size);
> if (ret)
> return ret;
>
> - res = register_memory_resource(start, size);
> - ret = -EEXIST;
> - if (!res)
> - return ret;
> -
> { /* Stupid hack to suppress address-never-null warning */
> void *p = NODE_DATA(nid);
> new_pgdat = !p;
> @@ -1290,6 +1288,22 @@ out:
> mem_hotplug_done();
> return ret;
> }
> +EXPORT_SYMBOL_GPL(add_memory_resource);
> +
> +int __ref add_memory(int nid, u64 start, u64 size)
> +{
> + struct resource *res;
> + int ret;
> +
> + res = register_memory_resource(start, size);
> + if (!res)
> + return -EEXIST;
> +
> + ret = add_memory_resource(nid, res);
> + if (ret < 0)
> + release_memory_resource(res);
> + return ret;
> +}
> EXPORT_SYMBOL_GPL(add_memory);
>
> #ifdef CONFIG_MEMORY_HOTREMOVE
>
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2015-08-13 10:22 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-30 17:03 [PATCHv3 00/10] mm, xen/balloon: memory hotplug improvements David Vrabel
2015-07-30 17:03 ` [PATCHv3 01/10] mm: memory hotplug with an existing resource David Vrabel
2015-07-31 23:15 ` Daniel Kiper
2015-08-13 10:21 ` David Vrabel [this message]
2015-08-13 20:40 ` [Xen-devel] " Andrew Morton
2015-08-16 11:41 ` Tang Chen
2015-07-30 17:03 ` [PATCHv3 02/10] xen/balloon: remove scratch page left overs David Vrabel
2015-07-30 17:03 ` [PATCHv3 03/10] x86/xen: discard RAM regions above the maximum reservation David Vrabel
2015-07-30 17:03 ` [PATCHv3 04/10] xen/balloon: find non-conflicting regions to place hotplugged memory David Vrabel
2015-07-30 17:03 ` [PATCHv3 05/10] xen/balloon: rationalize memory hotplug stats David Vrabel
2015-07-30 17:03 ` [PATCHv3 06/10] xen/balloon: only hotplug additional memory if required David Vrabel
2015-07-31 23:18 ` Daniel Kiper
2015-07-30 17:03 ` [PATCHv3 07/10] xen/balloon: make alloc_xenballoon_pages() always allocate low pages David Vrabel
2015-07-30 17:03 ` [PATCHv3 08/10] xen/balloon: use hotplugged pages for foreign mappings etc David Vrabel
2015-07-31 23:20 ` Daniel Kiper
2015-07-30 17:03 ` [PATCHv3 09/10] x86/xen: export xen_alloc_p2m_entry() David Vrabel
2015-07-31 23:22 ` Daniel Kiper
2015-07-30 17:03 ` [PATCHv3 10/10] xen/balloon: pre-allocate p2m entries for ballooned pages David Vrabel
2015-07-31 23:23 ` Daniel Kiper
2015-09-29 16:24 ` [Xen-devel] [PATCHv3 00/10] mm, xen/balloon: memory hotplug improvements David Vrabel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55CC6FB7.4080600@citrix.com \
--to=david.vrabel@citrix.com \
--cc=akpm@linux-foundation.org \
--cc=boris.ostrovsky@oracle.com \
--cc=daniel.kiper@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).