From: Mike Kravetz <mike.kravetz@oracle.com>
To: Hugh Dickins <hughd@google.com>,
Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Dave Hansen <dave.hansen@linux.intel.com>,
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>,
Davidlohr Bueso <dave@stgolabs.net>,
Andrea Arcangeli <aarcange@redhat.com>
Subject: Re: [PATCH v2 0/4] hugetlbfs fallocate hole punch race with page faults
Date: Wed, 28 Oct 2015 17:21:59 -0700 [thread overview]
Message-ID: <563166A7.4030103@oracle.com> (raw)
In-Reply-To: <56313A7D.4000102@oracle.com>
On 10/28/2015 02:13 PM, Mike Kravetz wrote:
> On 10/28/2015 02:00 PM, Hugh Dickins wrote:
>> On Wed, 28 Oct 2015, Mike Kravetz wrote:
>>> On 10/27/2015 08:34 PM, Hugh Dickins wrote:
>>>
>>> Thanks for the detailed response Hugh. I will try to address your questions
>>> and provide more reasoning behind the use case and need for this code.
>>
>> And thank you for your detailed response, Mike: that helped a lot.
>>
>>> Ok, here is a bit more explanation of the proposed use case. It all
>>> revolves around a DB's use of hugetlbfs and the desire for more control
>>> over the underlying memory. This additional control is achieved by
>>> adding existing fallocate and userfaultfd semantics to hugetlbfs.
>>>
>>> In this use case there is a single process that manages hugetlbfs files
>>> and the underlying memory resources. It pre-allocates/initializes these
>>> files.
>>>
>>> In addition, there are many other processes which access (rw mode) these
>>> files. They will simply mmap the files. It is expected that they will
>>> not fault in any new pages. Rather, all pages would have been pre-allocated
>>> by the management process.
>>>
>>> At some time, the management process determines that specific ranges of
>>> pages within the hugetlbfs files are no longer needed. It will then punch
>>> holes in the files. These 'free' pages within the holes may then be used
>>> for other purposes. For applications like this (sophisticated DBs), huge
>>> pages are reserved at system init time and closely managed by the
>>> application.
>>> Hence, the desire for this additional control.
>>>
>>> So, when a hole containing N huge pages is punched, the management process
>>> wants to know that it really has N huge pages for other purposes. Ideally,
>>> none of the other processes mapping this file/area would access the hole.
>>> This is an application error, and it can be 'caught' with userfaultfd.
>>>
>>> Since these other (non-management) processes will never fault in pages,
>>> they would simply set up userfaultfd to catch any page faults immediately
>>> after mmaping the hugetlbfs file.
>>>
>>>>
>>>> But it sounds to me more as if the holes you want punched are not
>>>> quite like on other filesystems, and you want to be able to police
>>>> them afterwards with userfaultfd, to prevent them from being refilled.
>>>
>>> I am not sure if they are any different.
>>>
>>> One could argue that a hole punch operation must always result in all
>>> pages within the hole being deallocated. As you point out, this could
>>> race with a fault. Previously, there would be no way to determine if
>>> all pages had been deallocated because user space could not detect this
>>> race. Now, userfaultfd allows user space to catch page faults. So,
>>> it is now possible to catch/depend on hole punch deallocating all pages
>>> within the hole.
>>>
>>>>
>>>> Can't userfaultfd be used just slightly earlier, to prevent them from
>>>> being filled while doing the holepunch? Then no need for this patchset?
>>>
>>> I do not think so, at least with current userfaultfd semantics. The hole
>>> needs to be punched before being caught with UFFDIO_REGISTER_MODE_MISSING.
>>
>> Great, that makes sense.
>>
>> I was worried that you needed some kind of atomic treatment of the whole
>> extent punched, but all you need is to close the hole/fault race one
>> hugepage at a time.
>>
>> Throw away all of 1/4, 2/4, 3/4: I think all you need is your 4/4
>> (plus i_mmap_lock_write around the hugetlb_vmdelete_list of course).
>>
>> There you already do the single hugepage hugetlb_vmdelete_list()
>> under mutex_lock(&hugetlb_fault_mutex_table[hash]).
>>
>> And it should come as no surprise that hugetlb_fault() does most
>> of its work under that same mutex.
>>
>> So once remove_inode_hugepages() unlocks the mutex, that page is gone
>> from the file, and userfaultfd UFFDIO_REGISTER_MODE_MISSING will do
>> what you want, won't it?
>>
>> I don't think "my" code buys you anything at all: you're not in danger of
>> shmem's starvation livelock issue, partly because remove_inode_hugepages()
>> uses the simple loop from start to end, and partly because hugetlb_fault()
>> already takes the serializing mutex (no equivalent in shmem_fault()).
>>
>> Or am I dreaming?
>
> I don't think you are dreaming.
>
> I should have stepped back and thought about this more before before pulling
> in the shmem code. It really is only a 'page at a time' operation, and we
> can use the fault mutex table for that.
>
> I'll code it up with just the changes needed for 4/4 and put it through some
> stress testing.
Thanks again Hugh. Testing was successful: current hugetlbfs fallocate
stress testing and testing with "in development" hugetlbfs userfaultfd code.
Andrew, would you like a single patch that includes 4/4 of the series
and i_mmap_lock_write? You could then throw away the previous patches
and the log would look nicer.
--
Mike Kravetz
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
prev parent reply other threads:[~2015-10-29 0:25 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-20 23:52 [PATCH v2 0/4] hugetlbfs fallocate hole punch race with page faults Mike Kravetz
2015-10-20 23:52 ` [PATCH v2 1/4] mm/hugetlb: Define hugetlb_falloc structure for hole punch race Mike Kravetz
2015-10-20 23:52 ` [PATCH v2 2/4] mm/hugetlb: Setup hugetlb_falloc during fallocate hole punch Mike Kravetz
2015-10-21 0:11 ` Dave Hansen
2015-10-21 1:02 ` Mike Kravetz
2015-10-20 23:52 ` [PATCH v2 3/4] mm/hugetlb: page faults check for fallocate hole punch in progress and wait Mike Kravetz
2015-10-28 3:37 ` Hugh Dickins
2015-10-20 23:52 ` [PATCH v2 4/4] mm/hugetlb: Unmap pages to remove if page fault raced with hole punch Mike Kravetz
2015-10-28 3:34 ` [PATCH v2 0/4] hugetlbfs fallocate hole punch race with page faults Hugh Dickins
2015-10-28 16:06 ` Mike Kravetz
2015-10-28 21:00 ` Hugh Dickins
2015-10-28 21:13 ` Mike Kravetz
2015-10-29 0:21 ` Mike Kravetz [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=563166A7.4030103@oracle.com \
--to=mike.kravetz@oracle.com \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=dave.hansen@linux.intel.com \
--cc=dave@stgolabs.net \
--cc=hughd@google.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=n-horiguchi@ah.jp.nec.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).