linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Boaz Harrosh <boaz@plexistor.com>
To: Ross Zwisler <ross.zwisler@linux.intel.com>,
	Dan Williams <dan.j.williams@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>,
	linux-nvdimm <linux-nvdimm@ml01.01.org>,
	Dave Chinner <david@fromorbit.com>,
	Oleg Nesterov <oleg@redhat.com>,
	Christoph Hellwig <hch@infradead.org>,
	linux-mm <linux-mm@kvack.org>, Mel Gorman <mgorman@suse.de>,
	Johannes Weiner <hannes@cmpxchg.org>,
	"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Subject: Re: [RFC 0/2] New MAP_PMEM_AWARE mmap flag
Date: Thu, 25 Feb 2016 09:44:36 +0200	[thread overview]
Message-ID: <56CEB0E4.8080305@plexistor.com> (raw)
In-Reply-To: <20160224040947.GA10313@linux.intel.com>

On 02/24/2016 06:09 AM, Ross Zwisler wrote:
> On Tue, Feb 23, 2016 at 03:56:17PM -0800, Dan Williams wrote:
<>
> 
> MAP_PMEM_AWARE is interesting, but even in a perfect world it seems like a
> partial solution - applications still need to call *sync to get the FS
> metadata to be durable, and they have no reliable way of knowing which of
> their actions will cause the metadata to be out of sync.
> 

So there is the very simple answer:
	Just like today.

Today you need to call m/fsync after you have finished all modifications
and you want a persistent point. This of course will work. .I.E write
the application same as if the mount is not dax. But do set the flag
and switch to pmem_memcpy all over. BTW pmem_memcpy() will give you
10% gain on memory performance with fully-cached FS a swell.

I do not mind that. Just that with MAP_PMEM_AWARE the call to sync will
be fast and the page-faults much much faster. I'm a pragmatic person I'm saying
to application writers.
	Change nothing, have the same source code for both DAX and none DAX
	mode. Just switch to pmem_memcpy() / pmem_flush() everywhere and set
	the mmap flag, and you have 3x boost on your mmap performance.

> Dave, is your objection to the MAP_SYNC idea a practical one about complexity
> and time to get it implemented, or do you think it's is the wrong solution?

So you see with MAP_SYNC you are asking developers to write two versions of their
app, the later which does not call m/fsync.

[BTW MAP_SYNC is a *very bad* name because with it you are requiring the applications
 to switch to pmem_memcpy() and persistent stores everywhere. It might be very
 confusing and people might assume that the Kernel can magically guess every time
 an mmap pointer was modified, even after the page-fault.
 It should be called something like MAP_PMEM_SYNC
]

> _______________________________________________
> Linux-nvdimm mailing list
> Linux-nvdimm@lists.01.org
> https://lists.01.org/mailman/listinfo/linux-nvdimm
> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2016-02-25  7:44 UTC|newest]

Thread overview: 69+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-21 17:03 [RFC 0/2] New MAP_PMEM_AWARE mmap flag Boaz Harrosh
2016-02-21 17:04 ` [RFC 1/2] mmap: Define a new " Boaz Harrosh
2016-02-21 17:06 ` [RFC 2/2] dax: Support " Boaz Harrosh
2016-02-21 19:51 ` [RFC 0/2] New " Dan Williams
2016-02-21 20:24   ` Boaz Harrosh
2016-02-21 20:57     ` Dan Williams
2016-02-21 21:23       ` Boaz Harrosh
2016-02-21 22:03         ` Dan Williams
2016-02-21 22:31           ` Dave Chinner
2016-02-22  9:57             ` Boaz Harrosh
2016-02-22 15:34             ` Jeff Moyer
2016-02-22 17:44               ` Christoph Hellwig
2016-02-22 17:58                 ` Jeff Moyer
2016-02-22 18:03                   ` Christoph Hellwig
2016-02-22 18:52                     ` Jeff Moyer
2016-02-23  9:45                       ` Christoph Hellwig
2016-02-22 20:05                 ` Rudoff, Andy
2016-02-23  9:52                   ` Christoph Hellwig
2016-02-23 10:07                     ` Rudoff, Andy
2016-02-23 12:06                       ` Dave Chinner
2016-02-23 17:10                         ` Ross Zwisler
2016-02-23 21:47                           ` Dave Chinner
2016-02-23 22:15                             ` Boaz Harrosh
2016-02-23 23:28                               ` Dave Chinner
2016-02-24  0:08                                 ` Boaz Harrosh
2016-02-23 14:10                     ` Boaz Harrosh
2016-02-23 16:56                       ` Dan Williams
2016-02-23 17:05                         ` Ross Zwisler
2016-02-23 17:26                           ` Dan Williams
2016-02-23 21:55                         ` Boaz Harrosh
2016-02-23 22:33                           ` Dan Williams
2016-02-23 23:07                             ` Boaz Harrosh
2016-02-23 23:23                               ` Dan Williams
2016-02-23 23:40                                 ` Boaz Harrosh
2016-02-24  0:08                                   ` Dave Chinner
2016-02-23 23:28                             ` Jeff Moyer
2016-02-23 23:34                               ` Dan Williams
2016-02-23 23:43                                 ` Jeff Moyer
2016-02-23 23:56                                   ` Dan Williams
2016-02-24  4:09                                     ` Ross Zwisler
2016-02-24 19:30                                       ` Ross Zwisler
2016-02-25  9:46                                         ` Jan Kara
2016-02-25  7:44                                       ` Boaz Harrosh [this message]
2016-02-24 15:02                                     ` Jeff Moyer
2016-02-24 22:56                                       ` Dave Chinner
2016-02-25 16:24                                         ` Jeff Moyer
2016-02-25 19:11                                           ` Jeff Moyer
2016-02-25 20:15                                             ` Dave Chinner
2016-02-25 20:57                                               ` Jeff Moyer
2016-02-25 22:27                                                 ` Dave Chinner
2016-02-26  4:02                                                   ` Dan Williams
2016-02-26 10:04                                                     ` Thanumalayan Sankaranarayana Pillai
2016-02-28 10:17                                                       ` Boaz Harrosh
2016-03-03 17:38                                                         ` Howard Chu
2016-02-29 20:25                                                   ` Jeff Moyer
2016-02-25 21:08                                               ` Phil Terry
2016-02-25 21:39                                                 ` Dave Chinner
2016-02-25 21:20                                           ` Dave Chinner
2016-02-29 20:32                                             ` Jeff Moyer
2016-02-23 17:25                       ` Ross Zwisler
2016-02-23 22:47                         ` Boaz Harrosh
2016-02-22 21:50               ` Dave Chinner
2016-02-23 13:51               ` Boaz Harrosh
2016-02-23 14:22                 ` Jeff Moyer
2016-02-22 11:05           ` Boaz Harrosh
2016-03-11  6:44 ` Andy Lutomirski
2016-03-11 19:07   ` Dan Williams
2016-03-11 19:10     ` Andy Lutomirski
2016-03-11 23:02       ` Rudoff, Andy

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56CEB0E4.8080305@plexistor.com \
    --to=boaz@plexistor.com \
    --cc=arnd@arndb.de \
    --cc=dan.j.williams@intel.com \
    --cc=david@fromorbit.com \
    --cc=hannes@cmpxchg.org \
    --cc=hch@infradead.org \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=linux-mm@kvack.org \
    --cc=linux-nvdimm@ml01.01.org \
    --cc=mgorman@suse.de \
    --cc=oleg@redhat.com \
    --cc=ross.zwisler@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).