linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Mike Kravetz <mike.kravetz@oracle.com>
To: Ingo Molnar <mingo@kernel.org>
Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org, x86@kernel.org,
	Hugh Dickins <hughd@google.com>,
	Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>,
	Hillf Danton <hillf.zj@alibaba-inc.com>,
	"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
	David Rientjes <rientjes@google.com>,
	Dave Hansen <dave.hansen@linux.intel.com>,
	Thomas Gleixner <tglx@linutronix.de>,
	Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Will Deacon <will.deacon@arm.com>,
	Steve Capper <steve.capper@linaro.org>,
	Andrew Morton <akpm@linux-foundation.org>
Subject: Re: [RFC PATCH 2/2] x86/hugetlb: Attempt PUD_SIZE mapping alignment if PMD sharing enabled
Date: Tue, 29 Mar 2016 10:05:31 -0700	[thread overview]
Message-ID: <56FAB5DB.8070003@oracle.com> (raw)
In-Reply-To: <20160329083510.GA27941@gmail.com>

On 03/29/2016 01:35 AM, Ingo Molnar wrote:
> 
> * Mike Kravetz <mike.kravetz@oracle.com> wrote:
> 
>> When creating a hugetlb mapping, attempt PUD_SIZE alignment if the
>> following conditions are met:
>> - Address passed to mmap or shmat is NULL
>> - The mapping is flaged as shared
>> - The mapping is at least PUD_SIZE in length
>> If a PUD_SIZE aligned mapping can not be created, then fall back to a
>> huge page size mapping.
>>
>> Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
>> ---
>>  arch/x86/mm/hugetlbpage.c | 64 ++++++++++++++++++++++++++++++++++++++++++++---
>>  1 file changed, 61 insertions(+), 3 deletions(-)
>>
>> diff --git a/arch/x86/mm/hugetlbpage.c b/arch/x86/mm/hugetlbpage.c
>> index 42982b2..4f53af5 100644
>> --- a/arch/x86/mm/hugetlbpage.c
>> +++ b/arch/x86/mm/hugetlbpage.c
>> @@ -78,14 +78,39 @@ static unsigned long hugetlb_get_unmapped_area_bottomup(struct file *file,
>>  {
>>  	struct hstate *h = hstate_file(file);
>>  	struct vm_unmapped_area_info info;
>> +	bool pud_size_align = false;
>> +	unsigned long ret_addr;
>> +
>> +	/*
>> +	 * If PMD sharing is enabled, align to PUD_SIZE to facilitate
>> +	 * sharing.  Only attempt alignment if no address was passed in,
>> +	 * flags indicate sharing and size is big enough.
>> +	 */
>> +	if (IS_ENABLED(CONFIG_ARCH_WANT_HUGE_PMD_SHARE) &&
>> +	    !addr && flags & MAP_SHARED && len >= PUD_SIZE)
>> +		pud_size_align = true;
>>  
>>  	info.flags = 0;
>>  	info.length = len;
>>  	info.low_limit = current->mm->mmap_legacy_base;
>>  	info.high_limit = TASK_SIZE;
>> -	info.align_mask = PAGE_MASK & ~huge_page_mask(h);
>> +	if (pud_size_align)
>> +		info.align_mask = PAGE_MASK & (PUD_SIZE - 1);
>> +	else
>> +		info.align_mask = PAGE_MASK & ~huge_page_mask(h);
>>  	info.align_offset = 0;
>> -	return vm_unmapped_area(&info);
>> +	ret_addr = vm_unmapped_area(&info);
>> +
>> +	/*
>> +	 * If failed with PUD_SIZE alignment, try again with huge page
>> +	 * size alignment.
>> +	 */
>> +	if ((ret_addr & ~PAGE_MASK) && pud_size_align) {
>> +		info.align_mask = PAGE_MASK & ~huge_page_mask(h);
>> +		ret_addr = vm_unmapped_area(&info);
>> +	}
> 
> So AFAICS 'ret_addr' is either page aligned, or is an error code. Wouldn't it be a 
> lot easier to read to say:
> 
> 	if ((long)ret_addr > 0 && pud_size_align) {
> 		info.align_mask = PAGE_MASK & ~huge_page_mask(h);
> 		ret_addr = vm_unmapped_area(&info);
> 	}
> 
> 	return ret_addr;
> 
> to make it clear that it's about error handling, not some alignment 
> requirement/restriction?

Yes, I agree that is easier to read.  However, it assumes that process
virtual addresses can never evaluate to a negative long value.  This may
be the case for x86_64 today.  But, there are other architectures where
this is not the case.  I know this is x86 specific code, but might it be
possible that x86 virtual addresses could be negative longs in the future?

It appears that all callers of vm_unmapped_area() are using the page aligned
check to determine error.   I would prefer to do the same, and can add
comments to make that more clear.

Thanks,
-- 
Mike Kravetz

> 
>>  	/*
>> +	 * If failed with PUD_SIZE alignment, try again with huge page
>> +	 * size alignment.
>> +	 */
>> +	if ((addr & ~PAGE_MASK) && pud_size_align) {
>> +		info.align_mask = PAGE_MASK & ~huge_page_mask(h);
>> +		addr = vm_unmapped_area(&info);
>> +	}
> 
> Ditto.
> 
>>  		addr = vm_unmapped_area(&info);
>> +
>> +		/*
>> +		 * If failed again with PUD_SIZE alignment, finally try with
>> +		 * huge page size alignment.
>> +		 */
>> +		if (addr & ~PAGE_MASK) {
>> +			info.align_mask = PAGE_MASK & ~huge_page_mask(h);
>> +			addr = vm_unmapped_area(&info);
> 
> Ditto.
> 
> Thanks,
> 
> 	Ingo
> 

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2016-03-29 17:05 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-03-29  1:12 [RFC PATCH 0/2] hugetlb: If PMD sharing is possible, align to PUD_SIZE Mike Kravetz
2016-03-29  1:12 ` [RFC PATCH 1/2] mm/hugetlbfs: Attempt PUD_SIZE mapping alignment if PMD sharing enabled Mike Kravetz
2016-03-29  3:50   ` Hillf Danton
2016-03-29 16:29     ` Mike Kravetz
2016-03-31  2:18   ` Naoya Horiguchi
2016-03-31 16:45     ` Mike Kravetz
2016-03-29  1:12 ` [RFC PATCH 2/2] x86/hugetlb: " Mike Kravetz
2016-03-29  8:35   ` Ingo Molnar
2016-03-29 17:05     ` Mike Kravetz [this message]
2016-03-31  2:26       ` Naoya Horiguchi
2016-03-31 11:38         ` Ingo Molnar
2016-03-31 16:32         ` Mike Kravetz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56FAB5DB.8070003@oracle.com \
    --to=mike.kravetz@oracle.com \
    --cc=akpm@linux-foundation.org \
    --cc=catalin.marinas@arm.com \
    --cc=dave.hansen@linux.intel.com \
    --cc=hillf.zj@alibaba-inc.com \
    --cc=hpa@zytor.com \
    --cc=hughd@google.com \
    --cc=kirill.shutemov@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mingo@kernel.org \
    --cc=mingo@redhat.com \
    --cc=n-horiguchi@ah.jp.nec.com \
    --cc=rientjes@google.com \
    --cc=steve.capper@linaro.org \
    --cc=tglx@linutronix.de \
    --cc=will.deacon@arm.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).