linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Anshuman Khandual <khandual@linux.vnet.ibm.com>
To: "Jérôme Glisse" <jglisse@redhat.com>,
	akpm@linux-foundation.org, linux-kernel@vger.kernel.org,
	linux-mm@kvack.org
Cc: John Hubbard <jhubbard@nvidia.com>,
	Dan Williams <dan.j.williams@intel.com>,
	Ross Zwisler <ross.zwisler@linux.intel.com>
Subject: Re: [HMM v13 04/18] mm/ZONE_DEVICE/free-page: callback when page is freed
Date: Mon, 21 Nov 2016 13:56:02 +0530	[thread overview]
Message-ID: <5832AF9A.8020808@linux.vnet.ibm.com> (raw)
In-Reply-To: <1479493107-982-5-git-send-email-jglisse@redhat.com>

On 11/18/2016 11:48 PM, JA(C)rA'me Glisse wrote:
> When a ZONE_DEVICE page refcount reach 1 it means it is free and nobody
> is holding a reference on it (only device to which the memory belong do).
> Add a callback and call it when that happen so device driver can implement
> their own free page management.
> 
> Signed-off-by: JA(C)rA'me Glisse <jglisse@redhat.com>
> Cc: Dan Williams <dan.j.williams@intel.com>
> Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
> ---
>  include/linux/memremap.h | 4 ++++
>  kernel/memremap.c        | 8 ++++++++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/include/linux/memremap.h b/include/linux/memremap.h
> index fe61dca..469c88d 100644
> --- a/include/linux/memremap.h
> +++ b/include/linux/memremap.h
> @@ -37,17 +37,21 @@ static inline struct vmem_altmap *to_vmem_altmap(unsigned long memmap_start)
>  
>  /**
>   * struct dev_pagemap - metadata for ZONE_DEVICE mappings
> + * @free_devpage: free page callback when page refcount reach 1
>   * @altmap: pre-allocated/reserved memory for vmemmap allocations
>   * @res: physical address range covered by @ref
>   * @ref: reference count that pins the devm_memremap_pages() mapping
>   * @dev: host device of the mapping for debug
> + * @data: privata data pointer for free_devpage
>   * @flags: memory flags (look for MEMORY_FLAGS_NONE in memory_hotplug.h)
>   */
>  struct dev_pagemap {
> +	void (*free_devpage)(struct page *page, void *data);
>  	struct vmem_altmap *altmap;
>  	const struct resource *res;
>  	struct percpu_ref *ref;
>  	struct device *dev;
> +	void *data;
>  	int flags;
>  };
>  
> diff --git a/kernel/memremap.c b/kernel/memremap.c
> index 438a73aa2..3d28048 100644
> --- a/kernel/memremap.c
> +++ b/kernel/memremap.c
> @@ -190,6 +190,12 @@ EXPORT_SYMBOL(get_zone_device_page);
>  
>  void put_zone_device_page(struct page *page)
>  {
> +	/*
> +	 * If refcount is 1 then page is freed and refcount is stable as nobody
> +	 * holds a reference on the page.
> +	 */
> +	if (page->pgmap->free_devpage && page_count(page) == 1)
> +		page->pgmap->free_devpage(page, page->pgmap->data);
>  	put_dev_pagemap(page->pgmap);
>  }
>  EXPORT_SYMBOL(put_zone_device_page);
> @@ -326,6 +332,8 @@ void *devm_memremap_pages(struct device *dev, struct resource *res,
>  	pgmap->ref = ref;
>  	pgmap->res = &page_map->res;
>  	pgmap->flags = flags | MEMORY_DEVICE;
> +	pgmap->free_devpage = NULL;
> +	pgmap->data = NULL;

When is the driver expected to load up pgmap->free_devpage ? I thought
this function is one of the right places. Though as all the pages in
the same hotplug operation point to the same dev_pagemap structure this
loading can be done at later point of time as well.

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  parent reply	other threads:[~2016-11-21  8:26 UTC|newest]

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-18 18:18 [HMM v13 00/18] HMM (Heterogeneous Memory Management) v13 Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 01/18] mm/memory/hotplug: convert device parameter bool to set of flags Jérôme Glisse
2016-11-21  0:44   ` Balbir Singh
2016-11-21  4:53     ` Jerome Glisse
2016-11-21  6:57       ` Anshuman Khandual
2016-11-21 12:19         ` Jerome Glisse
2016-11-21  6:41   ` Anshuman Khandual
2016-11-21 12:27     ` Jerome Glisse
2016-11-22  5:35       ` Anshuman Khandual
2016-11-22 14:08         ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 02/18] mm/ZONE_DEVICE/unaddressable: add support for un-addressable device memory Jérôme Glisse
2016-11-21  8:06   ` Anshuman Khandual
2016-11-21 12:33     ` Jerome Glisse
2016-11-22  5:15       ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 03/18] mm/ZONE_DEVICE/free_hot_cold_page: catch ZONE_DEVICE pages Jérôme Glisse
2016-11-21  8:18   ` Anshuman Khandual
2016-11-21 12:50     ` Jerome Glisse
2016-11-22  4:30       ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 04/18] mm/ZONE_DEVICE/free-page: callback when page is freed Jérôme Glisse
2016-11-21  1:49   ` Balbir Singh
2016-11-21  4:57     ` Jerome Glisse
2016-11-21  8:26   ` Anshuman Khandual [this message]
2016-11-21 12:34     ` Jerome Glisse
2016-11-22  5:02       ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 05/18] mm/ZONE_DEVICE/devmem_pages_remove: allow early removal of device memory Jérôme Glisse
2016-11-21 10:37   ` Anshuman Khandual
2016-11-21 12:39     ` Jerome Glisse
2016-11-22  4:54       ` Anshuman Khandual
2016-11-18 18:18 ` [HMM v13 06/18] mm/ZONE_DEVICE/unaddressable: add special swap for unaddressable Jérôme Glisse
2016-11-21  2:06   ` Balbir Singh
2016-11-21  5:05     ` Jerome Glisse
2016-11-22  2:19       ` Balbir Singh
2016-11-22 13:59         ` Jerome Glisse
2016-11-21 11:10     ` Anshuman Khandual
2016-11-21 10:58   ` Anshuman Khandual
2016-11-21 12:42     ` Jerome Glisse
2016-11-22  4:48       ` Anshuman Khandual
2016-11-24 13:56         ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 07/18] mm/ZONE_DEVICE/x86: add support for un-addressable device memory Jérôme Glisse
2016-11-21  2:08   ` Balbir Singh
2016-11-21  5:08     ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 08/18] mm/hmm: heterogeneous memory management (HMM for short) Jérôme Glisse
2016-11-21  2:29   ` Balbir Singh
2016-11-21  5:14     ` Jerome Glisse
2016-11-23  4:03   ` Anshuman Khandual
2016-11-27 13:10     ` Jerome Glisse
2016-11-28  2:58       ` Anshuman Khandual
2016-11-28  9:41         ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 09/18] mm/hmm/mirror: mirror process address space on device with HMM helpers Jérôme Glisse
2016-11-21  2:42   ` Balbir Singh
2016-11-21  5:18     ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 10/18] mm/hmm/mirror: add range lock helper, prevent CPU page table update for the range Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 11/18] mm/hmm/mirror: add range monitor helper, to monitor CPU page table update Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 12/18] mm/hmm/mirror: helper to snapshot CPU page table Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 13/18] mm/hmm/mirror: device page fault handler Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 14/18] mm/hmm/migrate: support un-addressable ZONE_DEVICE page in migration Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 15/18] mm/hmm/migrate: add new boolean copy flag to migratepage() callback Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 16/18] mm/hmm/migrate: new memory migration helper for use with device memory Jérôme Glisse
2016-11-18 19:57   ` Aneesh Kumar K.V
2016-11-18 20:15     ` Jerome Glisse
2016-11-19 14:32   ` Aneesh Kumar K.V
2016-11-19 17:17     ` Jerome Glisse
2016-11-20 18:21       ` Aneesh Kumar K.V
2016-11-20 20:06         ` Jerome Glisse
2016-11-21  3:30   ` Balbir Singh
2016-11-21  5:31     ` Jerome Glisse
2016-11-18 18:18 ` [HMM v13 17/18] mm/hmm/devmem: device driver helper to hotplug ZONE_DEVICE memory Jérôme Glisse
2016-11-18 18:18 ` [HMM v13 18/18] mm/hmm/devmem: dummy HMM device as an helper for " Jérôme Glisse
2016-11-19  0:41 ` [HMM v13 00/18] HMM (Heterogeneous Memory Management) v13 John Hubbard
2016-11-19 14:50   ` Aneesh Kumar K.V
2016-11-23  9:16 ` Haggai Eran
2016-11-25 16:16   ` Jerome Glisse
2016-11-27 13:27     ` Haggai Eran

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5832AF9A.8020808@linux.vnet.ibm.com \
    --to=khandual@linux.vnet.ibm.com \
    --cc=akpm@linux-foundation.org \
    --cc=dan.j.williams@intel.com \
    --cc=jglisse@redhat.com \
    --cc=jhubbard@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=ross.zwisler@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).