From: David Hildenbrand <david@redhat.com>
To: Lance Yang <ioworker0@gmail.com>
Cc: akpm@linux-foundation.org, willy@infradead.org, sj@kernel.org,
baolin.wang@linux.alibaba.com, maskray@google.com,
ziy@nvidia.com, ryan.roberts@arm.com, 21cnbao@gmail.com,
mhocko@suse.com, fengwei.yin@intel.com, zokeefe@google.com,
shy828301@gmail.com, xiehuan09@gmail.com, libang.li@antgroup.com,
wangkefeng.wang@huawei.com, songmuchun@bytedance.com,
peterx@redhat.com, minchan@kernel.org, linux-mm@kvack.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 2/3] mm/rmap: integrate PMD-mapped folio splitting into pagewalk loop
Date: Thu, 6 Jun 2024 10:06:42 +0200 [thread overview]
Message-ID: <5a728148-ed93-4d68-a86f-9be3612dedbb@redhat.com> (raw)
In-Reply-To: <758f7be7-c17e-46d1-879f-83340ec85749@redhat.com>
On 06.06.24 10:01, David Hildenbrand wrote:
> On 06.06.24 05:55, Lance Yang wrote:
>> On Wed, Jun 5, 2024 at 10:28 PM David Hildenbrand <david@redhat.com> wrote:
>>>
>>> On 05.06.24 16:20, Lance Yang wrote:
>>>> Hi David,
>>>>
>>>> On Wed, Jun 5, 2024 at 8:46 PM David Hildenbrand <david@redhat.com> wrote:
>>>>>
>>>>> On 21.05.24 06:02, Lance Yang wrote:
>>>>>> In preparation for supporting try_to_unmap_one() to unmap PMD-mapped
>>>>>> folios, start the pagewalk first, then call split_huge_pmd_address() to
>>>>>> split the folio.
>>>>>>
>>>>>> Since TTU_SPLIT_HUGE_PMD will no longer perform immediately, we might
>>>>>> encounter a PMD-mapped THP missing the mlock in the VM_LOCKED range during
>>>>>> the page walk. It’s probably necessary to mlock this THP to prevent it from
>>>>>> being picked up during page reclaim.
>>>>>>
>>>>>> Suggested-by: David Hildenbrand <david@redhat.com>
>>>>>> Suggested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
>>>>>> Signed-off-by: Lance Yang <ioworker0@gmail.com>
>>>>>> ---
>>>>>
>>>>> [...] again, sorry for the late review.
>>>>
>>>> No worries at all, thanks for taking time to review!
>>>>
>>>>>
>>>>>> diff --git a/mm/rmap.c b/mm/rmap.c
>>>>>> index ddffa30c79fb..08a93347f283 100644
>>>>>> --- a/mm/rmap.c
>>>>>> +++ b/mm/rmap.c
>>>>>> @@ -1640,9 +1640,6 @@ static bool try_to_unmap_one(struct folio *folio, struct vm_area_struct *vma,
>>>>>> if (flags & TTU_SYNC)
>>>>>> pvmw.flags = PVMW_SYNC;
>>>>>>
>>>>>> - if (flags & TTU_SPLIT_HUGE_PMD)
>>>>>> - split_huge_pmd_address(vma, address, false, folio);
>>>>>> -
>>>>>> /*
>>>>>> * For THP, we have to assume the worse case ie pmd for invalidation.
>>>>>> * For hugetlb, it could be much worse if we need to do pud
>>>>>> @@ -1668,20 +1665,35 @@ static bool try_to_unmap_one(struct folio *folio, struct vm_area_struct *vma,
>>>>>> mmu_notifier_invalidate_range_start(&range);
>>>>>>
>>>>>> while (page_vma_mapped_walk(&pvmw)) {
>>>>>> - /* Unexpected PMD-mapped THP? */
>>>>>> - VM_BUG_ON_FOLIO(!pvmw.pte, folio);
>>>>>> -
>>>>>> /*
>>>>>> * If the folio is in an mlock()d vma, we must not swap it out.
>>>>>> */
>>>>>> if (!(flags & TTU_IGNORE_MLOCK) &&
>>>>>> (vma->vm_flags & VM_LOCKED)) {
>>>>>> /* Restore the mlock which got missed */
>>>>>> - if (!folio_test_large(folio))
>>>>>> + if (!folio_test_large(folio) ||
>>>>>> + (!pvmw.pte && (flags & TTU_SPLIT_HUGE_PMD)))
>>>>>> mlock_vma_folio(folio, vma);
>>>>>
>>>>> Can you elaborate why you think this would be required? If we would have
>>>>> performed the split_huge_pmd_address() beforehand, we would still be
>>>>> left with a large folio, no?
>>>>
>>>> Yep, there would still be a large folio, but it wouldn't be PMD-mapped.
>>>>
>>>> After Weifeng's series[1], the kernel supports mlock for PTE-mapped large
>>>> folio, but there are a few scenarios where we don't mlock a large folio, such
>>>> as when it crosses a VM_LOCKed VMA boundary.
>>>>
>>>> - if (!folio_test_large(folio))
>>>> + if (!folio_test_large(folio) ||
>>>> + (!pvmw.pte && (flags & TTU_SPLIT_HUGE_PMD)))
>>>>
>>>> And this check is just future-proofing and likely unnecessary. If encountering a
>>>> PMD-mapped THP missing the mlock for some reason, we can mlock this
>>>> THP to prevent it from being picked up during page reclaim, since it is fully
>>>> mapped and doesn't cross the VMA boundary, IIUC.
>>>>
>>>> What do you think?
>>>> I would appreciate any suggestions regarding this check ;)
>>>
>>> Reading this patch only, I wonder if this change makes sense in the
>>> context here.
>>
>> Allow me to try explaining it again ;)
>>
>>>
>>> Before this patch, we would have PTE-mapped the PMD-mapped THP before
>>> reaching this call and skipped it due to "!folio_test_large(folio)".
>>
>> Yes, there is only a PTE-mapped THP when doing the "!folio_test_large(folio)"
>> check, as we will first conditionally split the PMD via
>> split_huge_pmd_address().
>>
>>>
>>> After this patch, we either
>>
>> Things will change. We'll first do the "!folio_test_large(folio)" check, then
>> conditionally split the PMD via split_huge_pmd_address().
>>
>>>
>>> a) PTE-remap the THP after this check, but retry and end-up here again,
>>> whereby we would skip it due to "!folio_test_large(folio)".
>>
>> Hmm...
>>
>> IIUC, we will skip it after this check, stop the page walk, and not
>> PTE-remap the THP.
>>
>>>
>>> b) Discard the PMD-mapped THP due to lazyfree directly. Can that
>>> co-exist with mlock and what would be the problem here with mlock?
>>
>> Before discarding a PMD-mapped THP as a whole, as patch #3 did,
>> we also perform the "!folio_test_large(folio)" check. If the THP coexists
>> with mlock, we will skip it, stop the page walk, and not discard it. IIUC.
>
> But "!folio_test_large(folio)" would *skip* the THP and not consider it
> regarding mlock.
>
> I'm probably missing something
I'm stupid, I missed that we still do the "goto walk_done_err;", only
that we don't do the mlock_vma_folio(folio, vma);
Yes, let's drop it for now! :)
--
Cheers,
David / dhildenb
next prev parent reply other threads:[~2024-06-06 8:06 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-21 4:02 [PATCH v6 0/3] Reclaim lazyfree THP without splitting Lance Yang
2024-05-21 4:02 ` [PATCH v6 1/3] mm/rmap: remove duplicated exit code in pagewalk loop Lance Yang
2024-06-05 12:34 ` David Hildenbrand
2024-06-05 12:49 ` Lance Yang
2024-05-21 4:02 ` [PATCH v6 2/3] mm/rmap: integrate PMD-mapped folio splitting into " Lance Yang
2024-06-05 12:46 ` David Hildenbrand
2024-06-05 14:20 ` Lance Yang
2024-06-05 14:28 ` David Hildenbrand
2024-06-05 14:39 ` David Hildenbrand
2024-06-05 14:57 ` Lance Yang
2024-06-05 15:02 ` David Hildenbrand
2024-06-05 15:43 ` Lance Yang
2024-06-05 16:16 ` David Hildenbrand
2024-06-06 3:57 ` Lance Yang
2024-06-06 3:55 ` Lance Yang
2024-06-06 8:01 ` David Hildenbrand
2024-06-06 8:06 ` David Hildenbrand [this message]
2024-06-06 9:38 ` Lance Yang
2024-06-06 9:41 ` David Hildenbrand
2024-06-07 1:50 ` Lance Yang
2024-05-21 4:02 ` [PATCH v6 3/3] mm/vmscan: avoid split lazyfree THP during shrink_folio_list() Lance Yang
[not found] ` <ede2a2ad-1046-4967-a930-692cfa829c7b@redhat.com>
2024-06-05 14:40 ` Lance Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5a728148-ed93-4d68-a86f-9be3612dedbb@redhat.com \
--to=david@redhat.com \
--cc=21cnbao@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=baolin.wang@linux.alibaba.com \
--cc=fengwei.yin@intel.com \
--cc=ioworker0@gmail.com \
--cc=libang.li@antgroup.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=maskray@google.com \
--cc=mhocko@suse.com \
--cc=minchan@kernel.org \
--cc=peterx@redhat.com \
--cc=ryan.roberts@arm.com \
--cc=shy828301@gmail.com \
--cc=sj@kernel.org \
--cc=songmuchun@bytedance.com \
--cc=wangkefeng.wang@huawei.com \
--cc=willy@infradead.org \
--cc=xiehuan09@gmail.com \
--cc=ziy@nvidia.com \
--cc=zokeefe@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox