From: "Huang\, Ying" <ying.huang@intel.com>
To: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
David Rientjes <rientjes@google.com>,
Andrea Arcangeli <aarcange@redhat.com>,
"Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>,
Andi Kleen <andi.kleen@intel.com>, Jan Kara <jack@suse.cz>,
Matthew Wilcox <mawilcox@microsoft.com>,
Hugh Dickins <hughd@google.com>, Minchan Kim <minchan@kernel.org>,
Shaohua Li <shli@fb.com>, Christopher Lameter <cl@linux.com>,
"Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>,
Punit Agrawal <punit.agrawal@arm.com>,
Anshuman Khandual <khandual@linux.vnet.ibm.com>,
Michal Hocko <mhocko@suse.com>
Subject: Re: [PATCH -V2 -mm 3/4] mm, hugetlbfs: Rename address to haddr in hugetlb_cow()
Date: Fri, 25 May 2018 08:34:31 +0800 [thread overview]
Message-ID: <87lgc8bmjs.fsf@yhuang-dev.intel.com> (raw)
In-Reply-To: <4e569170-9f4e-eb12-d10d-fe9b7fcdfc9d@oracle.com> (Mike Kravetz's message of "Thu, 24 May 2018 14:42:13 -0700")
Mike Kravetz <mike.kravetz@oracle.com> writes:
> On 05/23/2018 05:58 PM, Huang, Ying wrote:
>> From: Huang Ying <ying.huang@intel.com>
>>
>> To take better advantage of general huge page copying optimization,
>> the target subpage address will be passed to hugetlb_cow(), then
>> copy_user_huge_page(). So we will use both target subpage address and
>> huge page size aligned address in hugetlb_cow(). To distinguish
>> between them, "haddr" is used for huge page size aligned address to be
>> consistent with Transparent Huge Page naming convention.
>>
>> Now, only huge page size aligned address is used in hugetlb_cow(), so
>> the "address" is renamed to "haddr" in hugetlb_cow() in this patch.
>> Next patch will use target subpage address in hugetlb_cow() too.
>>
>> The patch is just code cleanup without any functionality changes.
>>
>> Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
>> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
>> Suggested-by: Michal Hocko <mhocko@suse.com>
>
> I believe Kirill may have been the one who suggested using haddr to be
> consistent with usage in huge_memory.c.
Yes. I should have added
Suggested-by: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Best Regards,
Huang, Ying
>> Cc: David Rientjes <rientjes@google.com>
>> Cc: Andrea Arcangeli <aarcange@redhat.com>
>> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
>> Cc: Andi Kleen <andi.kleen@intel.com>
>> Cc: Jan Kara <jack@suse.cz>
>> Cc: Matthew Wilcox <mawilcox@microsoft.com>
>> Cc: Hugh Dickins <hughd@google.com>
>> Cc: Minchan Kim <minchan@kernel.org>
>> Cc: Shaohua Li <shli@fb.com>
>> Cc: Christopher Lameter <cl@linux.com>
>> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
>> Cc: Punit Agrawal <punit.agrawal@arm.com>
>> Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
>> ---
>> mm/hugetlb.c | 26 ++++++++++++--------------
>> 1 file changed, 12 insertions(+), 14 deletions(-)
>>
>> diff --git a/mm/hugetlb.c b/mm/hugetlb.c
>> index 696befffe6f7..ad3bec2ed269 100644
>> --- a/mm/hugetlb.c
>> +++ b/mm/hugetlb.c
>> @@ -3500,7 +3500,7 @@ static void unmap_ref_private(struct mm_struct *mm, struct vm_area_struct *vma,
>> * Keep the pte_same checks anyway to make transition from the mutex easier.
>> */
>> static int hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma,
>> - unsigned long address, pte_t *ptep,
>> + unsigned long haddr, pte_t *ptep,
>> struct page *pagecache_page, spinlock_t *ptl)
>> {
>> pte_t pte;
>> @@ -3518,7 +3518,7 @@ static int hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma,
>> * and just make the page writable */
>> if (page_mapcount(old_page) == 1 && PageAnon(old_page)) {
>> page_move_anon_rmap(old_page, vma);
>> - set_huge_ptep_writable(vma, address, ptep);
>> + set_huge_ptep_writable(vma, haddr, ptep);
>> return 0;
>> }
>>
>> @@ -3542,7 +3542,7 @@ static int hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma,
>> * be acquired again before returning to the caller, as expected.
>> */
>> spin_unlock(ptl);
>> - new_page = alloc_huge_page(vma, address, outside_reserve);
>> + new_page = alloc_huge_page(vma, haddr, outside_reserve);
>>
>> if (IS_ERR(new_page)) {
>> /*
>> @@ -3555,11 +3555,10 @@ static int hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma,
>> if (outside_reserve) {
>> put_page(old_page);
>> BUG_ON(huge_pte_none(pte));
>> - unmap_ref_private(mm, vma, old_page, address);
>> + unmap_ref_private(mm, vma, old_page, haddr);
>> BUG_ON(huge_pte_none(pte));
>> spin_lock(ptl);
>> - ptep = huge_pte_offset(mm, address & huge_page_mask(h),
>> - huge_page_size(h));
>> + ptep = huge_pte_offset(mm, haddr, huge_page_size(h));
>
> Ha! The name change points out an obviously unnecessary conversion in
> the existing code. Yes, hugetlb_cow is always passed a hpage aligned
> address today.
>
>> if (likely(ptep &&
>> pte_same(huge_ptep_get(ptep), pte)))
>> goto retry_avoidcopy;
>> @@ -3584,12 +3583,12 @@ static int hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma,
>> goto out_release_all;
>> }
>>
>> - copy_user_huge_page(new_page, old_page, address, vma,
>> + copy_user_huge_page(new_page, old_page, haddr, vma,
>> pages_per_huge_page(h));
>> __SetPageUptodate(new_page);
>> set_page_huge_active(new_page);
>>
>> - mmun_start = address & huge_page_mask(h);
>> + mmun_start = haddr;
>
> And another one.
>
>> mmun_end = mmun_start + huge_page_size(h);
>> mmu_notifier_invalidate_range_start(mm, mmun_start, mmun_end);
>>
>> @@ -3598,25 +3597,24 @@ static int hugetlb_cow(struct mm_struct *mm, struct vm_area_struct *vma,
>> * before the page tables are altered
>> */
>> spin_lock(ptl);
>> - ptep = huge_pte_offset(mm, address & huge_page_mask(h),
>> - huge_page_size(h));
>> + ptep = huge_pte_offset(mm, haddr, huge_page_size(h));
>
> And yet another.
>
> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
next prev parent reply other threads:[~2018-05-25 0:34 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-24 0:58 [PATCH -V2 -mm 0/4] mm, huge page: Copy target sub-page last when copy huge page Huang, Ying
2018-05-24 0:58 ` [PATCH -V2 -mm 1/4] mm, clear_huge_page: Move order algorithm into a separate function Huang, Ying
2018-05-24 20:55 ` Mike Kravetz
2018-05-24 0:58 ` [PATCH -V2 -mm 2/4] mm, huge page: Copy target sub-page last when copy huge page Huang, Ying
2018-05-24 21:25 ` Mike Kravetz
2018-05-24 0:58 ` [PATCH -V2 -mm 3/4] mm, hugetlbfs: Rename address to haddr in hugetlb_cow() Huang, Ying
2018-05-24 21:42 ` Mike Kravetz
2018-05-25 0:34 ` Huang, Ying [this message]
2018-05-24 0:58 ` [PATCH -V2 -mm 4/4] mm, hugetlbfs: Pass fault address to cow handler Huang, Ying
2018-05-24 22:27 ` Mike Kravetz
2018-05-25 15:38 ` [PATCH -V2 -mm 0/4] mm, huge page: Copy target sub-page last when copy huge page Christopher Lameter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87lgc8bmjs.fsf@yhuang-dev.intel.com \
--to=ying.huang@intel.com \
--cc=aarcange@redhat.com \
--cc=akpm@linux-foundation.org \
--cc=andi.kleen@intel.com \
--cc=aneesh.kumar@linux.vnet.ibm.com \
--cc=cl@linux.com \
--cc=hughd@google.com \
--cc=jack@suse.cz \
--cc=khandual@linux.vnet.ibm.com \
--cc=kirill.shutemov@linux.intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mawilcox@microsoft.com \
--cc=mhocko@suse.com \
--cc=mike.kravetz@oracle.com \
--cc=minchan@kernel.org \
--cc=punit.agrawal@arm.com \
--cc=rientjes@google.com \
--cc=shli@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).