linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: "Huang\, Ying" <ying.huang@intel.com>
To: Minchan Kim <minchan@kernel.org>
Cc: "Andrew Morton" <akpm@linux-foundation.org>,
	linux-mm@kvack.org, linux-kernel@vger.kernel.org,
	"Hugh Dickins" <hughd@google.com>,
	"Paul E . McKenney" <paulmck@linux.vnet.ibm.com>,
	"Johannes Weiner" <hannes@cmpxchg.org>,
	"Tim Chen" <tim.c.chen@linux.intel.com>,
	"Shaohua Li" <shli@fb.com>,
	"Mel Gorman" <mgorman@techsingularity.net>,
	"J�r�me Glisse" <jglisse@redhat.com>,
	"Michal Hocko" <mhocko@suse.com>,
	"Andrea Arcangeli" <aarcange@redhat.com>,
	"David Rientjes" <rientjes@google.com>,
	"Rik van Riel" <riel@redhat.com>, "Jan Kara" <jack@suse.cz>,
	"Dave Jiang" <dave.jiang@intel.com>,
	"Aaron Lu" <aaron.lu@intel.com>
Subject: Re: [PATCH -V4 -mm] mm, swap: Fix race between swapoff and some swap operations
Date: Fri, 22 Dec 2017 22:14:43 +0800	[thread overview]
Message-ID: <87r2rmj1d8.fsf@yhuang-dev.intel.com> (raw)
In-Reply-To: <20171221235813.GA29033@bbox> (Minchan Kim's message of "Fri, 22 Dec 2017 08:58:13 +0900")

Minchan Kim <minchan@kernel.org> writes:

> On Thu, Dec 21, 2017 at 03:48:56PM +0800, Huang, Ying wrote:
>> Minchan Kim <minchan@kernel.org> writes:
>> 
>> > On Wed, Dec 20, 2017 at 09:26:32AM +0800, Huang, Ying wrote:
>> >> From: Huang Ying <ying.huang@intel.com>
>> >> 
>> >> When the swapin is performed, after getting the swap entry information
>> >> from the page table, system will swap in the swap entry, without any
>> >> lock held to prevent the swap device from being swapoff.  This may
>> >> cause the race like below,
>> >> 
>> >> CPU 1				CPU 2
>> >> -----				-----
>> >> 				do_swap_page
>> >> 				  swapin_readahead
>> >> 				    __read_swap_cache_async
>> >> swapoff				      swapcache_prepare
>> >>   p->swap_map = NULL		        __swap_duplicate
>> >> 					  p->swap_map[?] /* !!! NULL pointer access */
>> >> 
>> >> Because swapoff is usually done when system shutdown only, the race
>> >> may not hit many people in practice.  But it is still a race need to
>> >> be fixed.
>> >> 
>> >> To fix the race, get_swap_device() is added to check whether the
>> >> specified swap entry is valid in its swap device.  If so, it will keep
>> >> the swap entry valid via preventing the swap device from being
>> >> swapoff, until put_swap_device() is called.
>> >> 
>> >> Because swapoff() is very race code path, to make the normal path runs
>> >> as fast as possible, RCU instead of reference count is used to
>> >> implement get/put_swap_device().  From get_swap_device() to
>> >> put_swap_device(), the RCU read lock is held, so synchronize_rcu() in
>> >> swapoff() will wait until put_swap_device() is called.
>> >> 
>> >> In addition to swap_map, cluster_info, etc. data structure in the
>> >> struct swap_info_struct, the swap cache radix tree will be freed after
>> >> swapoff, so this patch fixes the race between swap cache looking up
>> >> and swapoff too.
>> >> 
>> >> Cc: Hugh Dickins <hughd@google.com>
>> >> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
>> >> Cc: Minchan Kim <minchan@kernel.org>
>> >> Cc: Johannes Weiner <hannes@cmpxchg.org>
>> >> Cc: Tim Chen <tim.c.chen@linux.intel.com>
>> >> Cc: Shaohua Li <shli@fb.com>
>> >> Cc: Mel Gorman <mgorman@techsingularity.net>
>> >> Cc: "Jrme Glisse" <jglisse@redhat.com>
>> >> Cc: Michal Hocko <mhocko@suse.com>
>> >> Cc: Andrea Arcangeli <aarcange@redhat.com>
>> >> Cc: David Rientjes <rientjes@google.com>
>> >> Cc: Rik van Riel <riel@redhat.com>
>> >> Cc: Jan Kara <jack@suse.cz>
>> >> Cc: Dave Jiang <dave.jiang@intel.com>
>> >> Cc: Aaron Lu <aaron.lu@intel.com>
>> >> Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
>> >> 
>> >> Changelog:
>> >> 
>> >> v4:
>> >> 
>> >> - Use synchronize_rcu() in enable_swap_info() to reduce overhead of
>> >>   normal paths further.
>> >
>> > Hi Huang,
>> 
>> Hi, Minchan,
>> 
>> > This version is much better than old. To me, it's due to not rcu,
>> > srcu, refcount thing but it adds swap device dependency(i.e., get/put)
>> > into every swap related functions so users who don't interested on swap
>> > don't need to care of it. Good.
>> >
>> > The problem is caused by freeing by swap related-data structure
>> > *dynamically* while old swap logic was based on static data
>> > structure(i.e., never freed and the verify it's stale).
>> > So, I reviewed some places where use PageSwapCache and swp_entry_t
>> > which could make access of swap related data structures.
>> >
>> > A example is __isolate_lru_page
>> >
>> > It calls page_mapping to get a address_space.
>> > What happens if the page is on SwapCache and raced with swapoff?
>> > The mapping got could be disappeared by the race. Right?
>> 
>> Yes.  We should think about that.  Considering the file cache pages, the
>> address_space backing the file cache pages may be freed dynamically too.
>> So to use page_mapping() return value for the file cache pages, some
>> kind of locking is needed to guarantee the address_space isn't freed
>> under us.  Page may be locked, or under writeback, or some other locks
>
> I didn't look at the code in detail but I guess every file page should
> be freed before the address space destruction and page_lock/lru_lock makes
> the work safe, I guess. So, it wouldn't be a problem.
>
> However, in case of swapoff, it doesn't remove pages from LRU list
> so there is no lock to prevent the race at this moment. :(

Take a look at file cache pages and file cache address_space freeing
code path.  It appears that similar situation is possible for them too.

The file cache pages will be delete from file cache address_space before
address_space (embedded in inode) is freed.  But they will be deleted
from LRU list only when its refcount dropped to zero, please take a look
at put_page() and release_pages().  While address_space will be freed
after putting reference to all file cache pages.  If someone holds a
reference to a file cache page for quite long time, it is possible for a
file cache page to be in LRU list after the inode/address_space is
freed.

And I found inode/address_space is freed witch call_rcu().  I don't know
whether this is related to page_mapping().

This is just my understanding.

>> need to be held, for example, page table lock, or lru_lock, etc.  For
>> __isolate_lru_page(), lru_lock will be held when it is called.  And we
>> will call synchronize_rcu() between clear PageSwapCache and free swap
>> cache, so the usage of swap cache in __isolate_lru_page() should be
>> safe.  Do you think my analysis makes sense?
>
> I don't understand how synchronize_rcu closes the race with spin_lock.
> Paul might help it.

Per my understanding, spin_lock() will preempt_disable(), so
synchronize_rcu() will wait until spin_unlock() is called.

> Even if we solve it, there is a other problem I spot.
> When I see migrate_vma_pages, it pass mapping to migrate_page which
> accesses mapping->tree_lock unconditionally even though the address_space
> is already gone.

Before migrate_vma_pages() is called, migrate_vma_prepare() is called,
where pages are locked.  So it is safe.

> Hmm, I didn't check all sites where uses PageSwapCache, swp_entry_t
> but gut feeling is it would be not simple.

Yes.  We should check all sites.  Thanks for your help!

Best Regards,
Huang, Ying

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

  reply	other threads:[~2017-12-22 14:14 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-20  1:26 [PATCH -V4 -mm] mm, swap: Fix race between swapoff and some swap operations Huang, Ying
2017-12-21  2:16 ` Minchan Kim
2017-12-21  7:48   ` Huang, Ying
2017-12-21 23:58     ` Minchan Kim
2017-12-22 14:14       ` Huang, Ying [this message]
2017-12-22 16:14         ` Paul E. McKenney
2017-12-25  1:28           ` Huang, Ying
2017-12-23  1:36         ` Minchan Kim
2017-12-26  5:33           ` Huang, Ying
2018-01-02 10:21           ` Mel Gorman
2018-01-02 11:29             ` Jan Kara
2018-01-02 13:29               ` Mel Gorman
2018-01-03  0:42                 ` Huang, Ying
2018-01-03  9:54                   ` Mel Gorman
2018-01-04  1:17                     ` Huang, Ying
2018-01-04 10:21                       ` Mel Gorman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87r2rmj1d8.fsf@yhuang-dev.intel.com \
    --to=ying.huang@intel.com \
    --cc=aarcange@redhat.com \
    --cc=aaron.lu@intel.com \
    --cc=akpm@linux-foundation.org \
    --cc=dave.jiang@intel.com \
    --cc=hannes@cmpxchg.org \
    --cc=hughd@google.com \
    --cc=jack@suse.cz \
    --cc=jglisse@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@techsingularity.net \
    --cc=mhocko@suse.com \
    --cc=minchan@kernel.org \
    --cc=paulmck@linux.vnet.ibm.com \
    --cc=riel@redhat.com \
    --cc=rientjes@google.com \
    --cc=shli@fb.com \
    --cc=tim.c.chen@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).