From: Minchan Kim <minchan@kernel.org>
To: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
Yosry Ahmed <yosryahmed@google.com>,
linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: [PATCHv2 4/6] zsmalloc: rework compaction algorithm
Date: Thu, 23 Feb 2023 15:46:25 -0800 [thread overview]
Message-ID: <Y/f60c25V4oiIeMN@google.com> (raw)
In-Reply-To: <20230223030451.543162-5-senozhatsky@chromium.org>
On Thu, Feb 23, 2023 at 12:04:49PM +0900, Sergey Senozhatsky wrote:
> The zsmalloc compaction algorithm has the potential to
> waste some CPU cycles, particularly when compacting pages
> within the same fullness group. This is due to the way it
> selects the head page of the fullness list for source and
> destination pages, and how it reinserts those pages during
> each iteration. The algorithm may first use a page as a
> migration destination and then as a migration source,
> leading to an unnecessary back-and-forth movement of
> objects.
>
> Consider the following fullness list:
>
> PageA PageB PageC PageD PageE
>
> During the first iteration, the compaction algorithm will
> select PageA as the source and PageB as the destination.
> All of PageA's objects will be moved to PageB, and then
> PageA will be released while PageB is reinserted into the
> fullness list.
>
> PageB PageC PageD PageE
>
> During the next iteration, the compaction algorithm will
> again select the head of the list as the source and destination,
> meaning that PageB will now serve as the source and PageC as
> the destination. This will result in the objects being moved
> away from PageB, the same objects that were just moved to PageB
> in the previous iteration.
>
> To prevent this avalanche effect, the compaction algorithm
Good point.
> should not reinsert the destination page between iterations.
> By doing so, the most optimal page will continue to be used
> and its usage ratio will increase, reducing internal
> fragmentation. The destination page should only be reinserted
> into the fullness list if:
> - It becomes full
> - No source page is available.
I think that's really better option, yeah.
>
> Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
> ---
> mm/zsmalloc.c | 82 ++++++++++++++++++++++++---------------------------
> 1 file changed, 38 insertions(+), 44 deletions(-)
>
> diff --git a/mm/zsmalloc.c b/mm/zsmalloc.c
> index 1a92ebe338eb..eacf9e32da5c 100644
> --- a/mm/zsmalloc.c
> +++ b/mm/zsmalloc.c
> @@ -1786,15 +1786,14 @@ struct zs_compact_control {
> int obj_idx;
> };
>
> -static int migrate_zspage(struct zs_pool *pool, struct size_class *class,
> - struct zs_compact_control *cc)
> +static void migrate_zspage(struct zs_pool *pool, struct size_class *class,
> + struct zs_compact_control *cc)
> {
> unsigned long used_obj, free_obj;
> unsigned long handle;
> struct page *s_page = cc->s_page;
> struct page *d_page = cc->d_page;
> int obj_idx = cc->obj_idx;
> - int ret = 0;
>
> while (1) {
> handle = find_alloced_obj(class, s_page, &obj_idx);
> @@ -1807,10 +1806,8 @@ static int migrate_zspage(struct zs_pool *pool, struct size_class *class,
> }
>
> /* Stop if there is no more space */
> - if (zspage_full(class, get_zspage(d_page))) {
> - ret = -ENOMEM;
> + if (zspage_full(class, get_zspage(d_page)))
> break;
> - }
>
> used_obj = handle_to_obj(handle);
> free_obj = obj_malloc(pool, get_zspage(d_page), handle);
> @@ -1823,8 +1820,6 @@ static int migrate_zspage(struct zs_pool *pool, struct size_class *class,
> /* Remember last position in this iteration */
> cc->s_page = s_page;
> cc->obj_idx = obj_idx;
> -
> - return ret;
> }
>
> static struct zspage *isolate_src_zspage(struct size_class *class)
> @@ -2228,57 +2223,56 @@ static unsigned long __zs_compact(struct zs_pool *pool,
> * as well as zpage allocation/free
> */
> spin_lock(&pool->lock);
> - while ((src_zspage = isolate_src_zspage(class))) {
> - /* protect someone accessing the zspage(i.e., zs_map_object) */
> - migrate_write_lock(src_zspage);
> -
> - if (!zs_can_compact(class))
> - break;
> -
> - cc.obj_idx = 0;
> - cc.s_page = get_first_page(src_zspage);
> -
> - while ((dst_zspage = isolate_dst_zspage(class))) {
> - migrate_write_lock_nested(dst_zspage);
> -
> + while (1) {
Hmm, I preferred the old loop structure. Did you see any problem
to keep old code structure?
Can't we just add checking logic whether destination zspage page
is full after migrate_zspage and the putback if it is. Otherwise,
keep continuing with the source zspage or new zspage we completely
migrate all zpages in the zspage. If there is no more source zspages
in the list, we can break the loop and then putback the dest zspage
into right class group at out of end loop.
> + if (!dst_zspage) {
> + dst_zspage = isolate_dst_zspage(class);
> + if (!dst_zspage)
> + goto out;
> + migrate_write_lock(dst_zspage);
> cc.d_page = get_first_page(dst_zspage);
> - /*
> - * If there is no more space in dst_page, resched
> - * and see if anyone had allocated another zspage.
> - */
> - if (!migrate_zspage(pool, class, &cc))
> - break;
> + }
>
> + if (!zs_can_compact(class)) {
> putback_zspage(class, dst_zspage);
> migrate_write_unlock(dst_zspage);
> - dst_zspage = NULL;
> - if (spin_is_contended(&pool->lock))
> - break;
> + goto out;
> }
>
> - /* Stop if we couldn't find slot */
> - if (dst_zspage == NULL)
> - break;
> + src_zspage = isolate_src_zspage(class);
> + if (!src_zspage) {
> + putback_zspage(class, dst_zspage);
> + migrate_write_unlock(dst_zspage);
> + goto out;
> + }
>
> - putback_zspage(class, dst_zspage);
> - migrate_write_unlock(dst_zspage);
> + migrate_write_lock_nested(src_zspage);
> +
> + cc.obj_idx = 0;
> + cc.s_page = get_first_page(src_zspage);
> + migrate_zspage(pool, class, &cc);
>
> if (putback_zspage(class, src_zspage) == ZS_INUSE_RATIO_0) {
> migrate_write_unlock(src_zspage);
> free_zspage(pool, class, src_zspage);
> pages_freed += class->pages_per_zspage;
> - } else
> + } else {
> migrate_write_unlock(src_zspage);
> - spin_unlock(&pool->lock);
> - cond_resched();
> - spin_lock(&pool->lock);
> - }
> + }
>
> - if (src_zspage) {
> - putback_zspage(class, src_zspage);
> - migrate_write_unlock(src_zspage);
> - }
> + if (get_fullness_group(class, dst_zspage) == ZS_INUSE_RATIO_100
> + || spin_is_contended(&pool->lock)) {
> + putback_zspage(class, dst_zspage);
> + migrate_write_unlock(dst_zspage);
> + dst_zspage = NULL;
> + }
>
> + if (!dst_zspage) {
> + spin_unlock(&pool->lock);
> + cond_resched();
> + spin_lock(&pool->lock);
> + }
> + }
> +out:
> spin_unlock(&pool->lock);
>
> return pages_freed;
> --
> 2.39.2.637.g21b0678d19-goog
>
next prev parent reply other threads:[~2023-02-23 23:46 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-23 3:04 [PATCHv2 0/6] zsmalloc: fine-grained fullness and new compaction algorithm Sergey Senozhatsky
2023-02-23 3:04 ` [PATCHv2 1/6] zsmalloc: remove insert_zspage() ->inuse optimization Sergey Senozhatsky
2023-02-23 23:09 ` Minchan Kim
2023-02-26 4:40 ` Sergey Senozhatsky
2023-02-23 3:04 ` [PATCHv2 2/6] zsmalloc: remove stat and fullness enums Sergey Senozhatsky
2023-02-23 23:11 ` Minchan Kim
2023-02-23 23:32 ` Yosry Ahmed
2023-02-26 4:39 ` Sergey Senozhatsky
2023-02-23 3:04 ` [PATCHv2 3/6] zsmalloc: fine-grained inuse ratio based fullness grouping Sergey Senozhatsky
2023-02-23 23:27 ` Minchan Kim
2023-02-26 4:38 ` Sergey Senozhatsky
2023-02-28 22:53 ` Minchan Kim
2023-03-01 4:05 ` Sergey Senozhatsky
2023-03-02 0:13 ` Minchan Kim
2023-03-01 8:55 ` Sergey Senozhatsky
2023-03-02 0:28 ` Minchan Kim
2023-03-02 0:53 ` Sergey Senozhatsky
2023-03-03 0:20 ` Minchan Kim
2023-03-03 1:06 ` Sergey Senozhatsky
2023-03-03 1:38 ` Minchan Kim
2023-03-03 1:43 ` Sergey Senozhatsky
2023-02-23 3:04 ` [PATCHv2 4/6] zsmalloc: rework compaction algorithm Sergey Senozhatsky
2023-02-23 23:46 ` Minchan Kim [this message]
2023-02-26 4:09 ` Sergey Senozhatsky
2023-02-28 23:14 ` Minchan Kim
2023-03-01 3:47 ` Sergey Senozhatsky
2023-02-23 3:04 ` [PATCHv2 5/6] zsmalloc: extend compaction statistics Sergey Senozhatsky
2023-02-23 23:51 ` Minchan Kim
2023-02-26 3:55 ` Sergey Senozhatsky
2023-02-28 22:20 ` Minchan Kim
2023-03-01 3:54 ` Sergey Senozhatsky
2023-03-01 23:48 ` Minchan Kim
2023-03-03 1:57 ` Sergey Senozhatsky
2023-02-23 3:04 ` [PATCHv2 6/6] zram: show zsmalloc objs_moved stat in mm_stat Sergey Senozhatsky
2023-02-23 23:53 ` [PATCHv2 0/6] zsmalloc: fine-grained fullness and new compaction algorithm Minchan Kim
2023-02-26 3:50 ` Sergey Senozhatsky
2023-02-28 22:17 ` Minchan Kim
2023-03-01 3:57 ` Sergey Senozhatsky
2023-03-01 23:48 ` Minchan Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Y/f60c25V4oiIeMN@google.com \
--to=minchan@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=senozhatsky@chromium.org \
--cc=yosryahmed@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).