linux-mm.kvack.org archive mirror
 help / color / mirror / Atom feed
From: Michal Hocko <mhocko@suse.com>
To: Mel Gorman <mgorman@techsingularity.net>
Cc: Andrew Morton <akpm@linux-foundation.org>,
	NeilBrown <neilb@suse.de>,
	Thierry Reding <thierry.reding@gmail.com>,
	Matthew Wilcox <willy@infradead.org>,
	Vlastimil Babka <vbabka@suse.cz>, Linux-MM <linux-mm@kvack.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 3/6] mm/page_alloc: Explicitly record high-order atomic allocations in alloc_flags
Date: Fri, 13 Jan 2023 14:02:01 +0100	[thread overview]
Message-ID: <Y8FWSWZ8dHVooCvN@dhcp22.suse.cz> (raw)
In-Reply-To: <20230113111217.14134-4-mgorman@techsingularity.net>

On Fri 13-01-23 11:12:14, Mel Gorman wrote:
> A high-order ALLOC_HARDER allocation is assumed to be atomic. While that
> is accurate, it changes later in the series. In preparation, explicitly
> record high-order atomic allocations in gfp_to_alloc_flags().
> 
> Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
> Acked-by: Vlastimil Babka <vbabka@suse.cz>

Acked-by: Michal Hocko <mhocko@suse.com>

> ---
>  mm/internal.h   |  1 +
>  mm/page_alloc.c | 29 +++++++++++++++++++++++------
>  2 files changed, 24 insertions(+), 6 deletions(-)
> 
> diff --git a/mm/internal.h b/mm/internal.h
> index 403e4386626d..178484d9fd94 100644
> --- a/mm/internal.h
> +++ b/mm/internal.h
> @@ -746,6 +746,7 @@ unsigned int reclaim_clean_pages_from_list(struct zone *zone,
>  #else
>  #define ALLOC_NOFRAGMENT	  0x0
>  #endif
> +#define ALLOC_HIGHATOMIC	0x200 /* Allows access to MIGRATE_HIGHATOMIC */
>  #define ALLOC_KSWAPD		0x800 /* allow waking of kswapd, __GFP_KSWAPD_RECLAIM set */
>  
>  enum ttu_flags;
> diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> index 0040b4e00913..0ef4f3236a5a 100644
> --- a/mm/page_alloc.c
> +++ b/mm/page_alloc.c
> @@ -3706,10 +3706,20 @@ struct page *rmqueue_buddy(struct zone *preferred_zone, struct zone *zone,
>  		 * reserved for high-order atomic allocation, so order-0
>  		 * request should skip it.
>  		 */
> -		if (order > 0 && alloc_flags & ALLOC_HARDER)
> +		if (alloc_flags & ALLOC_HIGHATOMIC)
>  			page = __rmqueue_smallest(zone, order, MIGRATE_HIGHATOMIC);
>  		if (!page) {
>  			page = __rmqueue(zone, order, migratetype, alloc_flags);
> +
> +			/*
> +			 * If the allocation fails, allow OOM handling access
> +			 * to HIGHATOMIC reserves as failing now is worse than
> +			 * failing a high-order atomic allocation in the
> +			 * future.
> +			 */
> +			if (!page && (alloc_flags & ALLOC_OOM))
> +				page = __rmqueue_smallest(zone, order, MIGRATE_HIGHATOMIC);
> +
>  			if (!page) {
>  				spin_unlock_irqrestore(&zone->lock, flags);
>  				return NULL;
> @@ -4023,8 +4033,10 @@ bool __zone_watermark_ok(struct zone *z, unsigned int order, unsigned long mark,
>  			return true;
>  		}
>  #endif
> -		if (alloc_harder && !free_area_empty(area, MIGRATE_HIGHATOMIC))
> +		if ((alloc_flags & (ALLOC_HIGHATOMIC|ALLOC_OOM)) &&
> +		    !free_area_empty(area, MIGRATE_HIGHATOMIC)) {
>  			return true;
> +		}
>  	}
>  	return false;
>  }
> @@ -4286,7 +4298,7 @@ get_page_from_freelist(gfp_t gfp_mask, unsigned int order, int alloc_flags,
>  			 * If this is a high-order atomic allocation then check
>  			 * if the pageblock should be reserved for the future
>  			 */
> -			if (unlikely(order && (alloc_flags & ALLOC_HARDER)))
> +			if (unlikely(alloc_flags & ALLOC_HIGHATOMIC))
>  				reserve_highatomic_pageblock(page, zone, order);
>  
>  			return page;
> @@ -4813,7 +4825,7 @@ static void wake_all_kswapds(unsigned int order, gfp_t gfp_mask,
>  }
>  
>  static inline unsigned int
> -gfp_to_alloc_flags(gfp_t gfp_mask)
> +gfp_to_alloc_flags(gfp_t gfp_mask, unsigned int order)
>  {
>  	unsigned int alloc_flags = ALLOC_WMARK_MIN | ALLOC_CPUSET;
>  
> @@ -4839,8 +4851,13 @@ gfp_to_alloc_flags(gfp_t gfp_mask)
>  		 * Not worth trying to allocate harder for __GFP_NOMEMALLOC even
>  		 * if it can't schedule.
>  		 */
> -		if (!(gfp_mask & __GFP_NOMEMALLOC))
> +		if (!(gfp_mask & __GFP_NOMEMALLOC)) {
>  			alloc_flags |= ALLOC_HARDER;
> +
> +			if (order > 0)
> +				alloc_flags |= ALLOC_HIGHATOMIC;
> +		}
> +
>  		/*
>  		 * Ignore cpuset mems for GFP_ATOMIC rather than fail, see the
>  		 * comment for __cpuset_node_allowed().
> @@ -5048,7 +5065,7 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
>  	 * kswapd needs to be woken up, and to avoid the cost of setting up
>  	 * alloc_flags precisely. So we do that now.
>  	 */
> -	alloc_flags = gfp_to_alloc_flags(gfp_mask);
> +	alloc_flags = gfp_to_alloc_flags(gfp_mask, order);
>  
>  	/*
>  	 * We need to recalculate the starting point for the zonelist iterator
> -- 
> 2.35.3

-- 
Michal Hocko
SUSE Labs


  reply	other threads:[~2023-01-13 13:02 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-01-13 11:12 [PATCH 0/6 v3] Discard __GFP_ATOMIC Mel Gorman
2023-01-13 11:12 ` [PATCH 1/6] mm/page_alloc: Rename ALLOC_HIGH to ALLOC_MIN_RESERVE Mel Gorman
2023-01-13 11:12 ` [PATCH 2/6] mm/page_alloc: Treat RT tasks similar to __GFP_HIGH Mel Gorman
2023-01-13 11:12 ` [PATCH 3/6] mm/page_alloc: Explicitly record high-order atomic allocations in alloc_flags Mel Gorman
2023-01-13 13:02   ` Michal Hocko [this message]
2023-01-13 11:12 ` [PATCH 4/6] mm/page_alloc: Explicitly define what alloc flags deplete min reserves Mel Gorman
2023-01-13 11:12 ` [PATCH 5/6] mm/page_alloc: Explicitly define how __GFP_HIGH non-blocking allocations accesses reserves Mel Gorman
2023-01-13 13:06   ` Michal Hocko
2023-02-07 13:32   ` Vlastimil Babka
2023-01-13 11:12 ` [PATCH 6/6] mm: discard __GFP_ATOMIC Mel Gorman
  -- strict thread matches above, loose matches on Subject: below --
2022-11-29 15:16 [RFC PATCH 0/6] Discard __GFP_ATOMIC Mel Gorman
2022-11-29 15:16 ` [PATCH 3/6] mm/page_alloc: Explicitly record high-order atomic allocations in alloc_flags Mel Gorman
2022-12-05  5:17   ` NeilBrown
2022-12-05 10:27     ` Mel Gorman
2022-12-08 16:51   ` Vlastimil Babka
2023-01-04 11:45     ` Mel Gorman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=Y8FWSWZ8dHVooCvN@dhcp22.suse.cz \
    --to=mhocko@suse.com \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=mgorman@techsingularity.net \
    --cc=neilb@suse.de \
    --cc=thierry.reding@gmail.com \
    --cc=vbabka@suse.cz \
    --cc=willy@infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).