* [PATCH v6 1/3] mm/mempolicy: use policy_node helper with MPOL_PREFERRED_MANY
2021-12-02 12:38 [PATCH v6 0/3] mm: add new syscall set_mempolicy_home_node Aneesh Kumar K.V
@ 2021-12-02 12:38 ` Aneesh Kumar K.V
2021-12-02 12:38 ` [PATCH v6 2/3] mm/mempolicy: add set_mempolicy_home_node syscall Aneesh Kumar K.V
2021-12-02 12:38 ` [PATCH v6 3/3] mm/mempolicy: wire up syscall set_mempolicy_home_node Aneesh Kumar K.V
2 siblings, 0 replies; 5+ messages in thread
From: Aneesh Kumar K.V @ 2021-12-02 12:38 UTC (permalink / raw)
To: linux-mm
Cc: akpm, daniel.m.jordan, Aneesh Kumar K.V, Ben Widawsky,
Dave Hansen, Feng Tang, Michal Hocko, Andrea Arcangeli,
Mel Gorman, Mike Kravetz, Randy Dunlap, Vlastimil Babka,
Andi Kleen, Dan Williams, Huang Ying, linux-api, Michal Hocko
A followup patch will enable setting a home node with MPOL_PREFERRED_MANY
memory policy. To facilitate that switch to using policy_node helper.
There is no functional change in this patch.
Cc: Ben Widawsky <ben.widawsky@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: linux-api@vger.kernel.org
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
mm/mempolicy.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 10e9c87260ed..673b5fb13346 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -2061,7 +2061,7 @@ static struct page *alloc_pages_preferred_many(gfp_t gfp, unsigned int order,
preferred_gfp &= ~(__GFP_DIRECT_RECLAIM | __GFP_NOFAIL);
page = __alloc_pages(preferred_gfp, order, nid, &pol->nodes);
if (!page)
- page = __alloc_pages(gfp, order, numa_node_id(), NULL);
+ page = __alloc_pages(gfp, order, nid, NULL);
return page;
}
@@ -2102,6 +2102,7 @@ struct page *alloc_pages_vma(gfp_t gfp, int order, struct vm_area_struct *vma,
}
if (pol->mode == MPOL_PREFERRED_MANY) {
+ node = policy_node(gfp, pol, node);
page = alloc_pages_preferred_many(gfp, order, node, pol);
mpol_cond_put(pol);
goto out;
@@ -2186,7 +2187,7 @@ struct page *alloc_pages(gfp_t gfp, unsigned order)
page = alloc_page_interleave(gfp, order, interleave_nodes(pol));
else if (pol->mode == MPOL_PREFERRED_MANY)
page = alloc_pages_preferred_many(gfp, order,
- numa_node_id(), pol);
+ policy_node(gfp, pol, numa_node_id()), pol);
else
page = __alloc_pages(gfp, order,
policy_node(gfp, pol, numa_node_id()),
--
2.31.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* [PATCH v6 2/3] mm/mempolicy: add set_mempolicy_home_node syscall
2021-12-02 12:38 [PATCH v6 0/3] mm: add new syscall set_mempolicy_home_node Aneesh Kumar K.V
2021-12-02 12:38 ` [PATCH v6 1/3] mm/mempolicy: use policy_node helper with MPOL_PREFERRED_MANY Aneesh Kumar K.V
@ 2021-12-02 12:38 ` Aneesh Kumar K.V
2021-12-02 13:07 ` Michal Hocko
2021-12-02 12:38 ` [PATCH v6 3/3] mm/mempolicy: wire up syscall set_mempolicy_home_node Aneesh Kumar K.V
2 siblings, 1 reply; 5+ messages in thread
From: Aneesh Kumar K.V @ 2021-12-02 12:38 UTC (permalink / raw)
To: linux-mm
Cc: akpm, daniel.m.jordan, Aneesh Kumar K.V, Ben Widawsky,
Dave Hansen, Feng Tang, Michal Hocko, Andrea Arcangeli,
Mel Gorman, Mike Kravetz, Randy Dunlap, Vlastimil Babka,
Andi Kleen, Dan Williams, Huang Ying, linux-api
This syscall can be used to set a home node for the MPOL_BIND
and MPOL_PREFERRED_MANY memory policy. Users should use this
syscall after setting up a memory policy for the specified range
as shown below.
mbind(p, nr_pages * page_size, MPOL_BIND, new_nodes->maskp,
new_nodes->size + 1, 0);
sys_set_mempolicy_home_node((unsigned long)p, nr_pages * page_size,
home_node, 0);
The syscall allows specifying a home node/preferred node from which kernel
will fulfill memory allocation requests first.
For address range with MPOL_BIND memory policy, if nodemask specifies more
than one node, page allocations will come from the node in the nodemask
with sufficient free memory that is closest to the home node/preferred node.
For MPOL_PREFERRED_MANY if the nodemask specifies more than one node,
page allocation will come from the node in the nodemask with sufficient
free memory that is closest to the home node/preferred node. If there is
not enough memory in all the nodes specified in the nodemask, the allocation
will be attempted from the closest numa node to the home node in the system.
This helps applications to hint at a memory allocation preference node
and fallback to _only_ a set of nodes if the memory is not available
on the preferred node. Fallback allocation is attempted from the node which is
nearest to the preferred node.
This helps applications to have control on memory allocation numa nodes and
avoids default fallback to slow memory NUMA nodes. For example a system with
NUMA nodes 1,2 and 3 with DRAM memory and 10, 11 and 12 of slow memory
new_nodes = numa_bitmask_alloc(nr_nodes);
numa_bitmask_setbit(new_nodes, 1);
numa_bitmask_setbit(new_nodes, 2);
numa_bitmask_setbit(new_nodes, 3);
p = mmap(NULL, nr_pages * page_size, protflag, mapflag, -1, 0);
mbind(p, nr_pages * page_size, MPOL_BIND, new_nodes->maskp, new_nodes->size + 1, 0);
sys_set_mempolicy_home_node(p, nr_pages * page_size, 2, 0);
This will allocate from nodes closer to node 2 and will make sure the kernel will
only allocate from nodes 1, 2, and 3. Memory will not be allocated from slow memory
nodes 10, 11, and 12. This differs from default MPOL_BIND behavior in that with
default MPOL_BIND the allocation will be attempted from node closer to the local node.
One of the reasons to specify a home node is to allow allocations from cpu less
NUMA node and its nearby NUMA nodes.
With MPOL_PREFERRED_MANY on the other hand will first try to allocate from the
closest node to node 2 from the node list 1, 2 and 3. If those nodes don't have
enough memory, kernel will allocate from slow memory node 10, 11 and 12 which
ever is closer to node 2.
Cc: Ben Widawsky <ben.widawsky@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: linux-api@vger.kernel.org
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
.../admin-guide/mm/numa_memory_policy.rst | 16 +++-
include/linux/mempolicy.h | 1 +
mm/mempolicy.c | 79 +++++++++++++++++++
3 files changed, 95 insertions(+), 1 deletion(-)
diff --git a/Documentation/admin-guide/mm/numa_memory_policy.rst b/Documentation/admin-guide/mm/numa_memory_policy.rst
index 64fd0ba0d057..a080d24df7de 100644
--- a/Documentation/admin-guide/mm/numa_memory_policy.rst
+++ b/Documentation/admin-guide/mm/numa_memory_policy.rst
@@ -408,7 +408,7 @@ follows:
Memory Policy APIs
==================
-Linux supports 3 system calls for controlling memory policy. These APIS
+Linux supports 4 system calls for controlling memory policy. These APIS
always affect only the calling task, the calling task's address space, or
some shared object mapped into the calling task's address space.
@@ -460,6 +460,20 @@ requested via the 'flags' argument.
See the mbind(2) man page for more details.
+Set home node for a Range of Task's Address Spacec::
+
+ long sys_set_mempolicy_home_node(unsigned long start, unsigned long len,
+ unsigned long home_node,
+ unsigned long flags);
+
+sys_set_mempolicy_home_node set the home node for a VMA policy present in the
+task's address range. The system call updates the home node only for the existing
+mempolicy range. Other address ranges are ignored. A home node is the NUMA node
+closest to which page allocation will come from. Specifying the home node override
+the default allocation policy to allocate memory close to the local node for an
+executing CPU.
+
+
Memory Policy Command Line Interface
====================================
diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h
index 3c7595e81150..668389b4b53d 100644
--- a/include/linux/mempolicy.h
+++ b/include/linux/mempolicy.h
@@ -46,6 +46,7 @@ struct mempolicy {
unsigned short mode; /* See MPOL_* above */
unsigned short flags; /* See set_mempolicy() MPOL_F_* above */
nodemask_t nodes; /* interleave/bind/perfer */
+ int home_node; /* Home node to use for MPOL_BIND and MPOL_PREFERRED_MANY */
union {
nodemask_t cpuset_mems_allowed; /* relative to these nodes */
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 673b5fb13346..cfed45ab3647 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -296,6 +296,7 @@ static struct mempolicy *mpol_new(unsigned short mode, unsigned short flags,
atomic_set(&policy->refcnt, 1);
policy->mode = mode;
policy->flags = flags;
+ policy->home_node = NUMA_NO_NODE;
return policy;
}
@@ -1477,6 +1478,77 @@ static long kernel_mbind(unsigned long start, unsigned long len,
return do_mbind(start, len, lmode, mode_flags, &nodes, flags);
}
+SYSCALL_DEFINE4(set_mempolicy_home_node, unsigned long, start, unsigned long, len,
+ unsigned long, home_node, unsigned long, flags)
+{
+ struct mm_struct *mm = current->mm;
+ struct vm_area_struct *vma;
+ struct mempolicy *new;
+ unsigned long vmstart;
+ unsigned long vmend;
+ unsigned long end;
+ int err = -ENOENT;
+
+ start = untagged_addr(start);
+ if (start & ~PAGE_MASK)
+ return -EINVAL;
+ /*
+ * flags is used for future extension if any.
+ */
+ if (flags != 0)
+ return -EINVAL;
+
+ /*
+ * Check home_node is online to avoid accessing uninitialized
+ * NODE_DATA.
+ */
+ if (home_node >= MAX_NUMNODES || !node_online(home_node))
+ return -EINVAL;
+
+ len = (len + PAGE_SIZE - 1) & PAGE_MASK;
+ end = start + len;
+
+ if (end < start)
+ return -EINVAL;
+ if (end == start)
+ return 0;
+ mmap_write_lock(mm);
+ vma = find_vma(mm, start);
+ for (; vma && vma->vm_start < end; vma = vma->vm_next) {
+
+ vmstart = max(start, vma->vm_start);
+ vmend = min(end, vma->vm_end);
+ new = mpol_dup(vma_policy(vma));
+ if (IS_ERR(new)) {
+ err = PTR_ERR(new);
+ break;
+ }
+ /*
+ * Only update home node if there is an existing vma policy
+ */
+ if (!new)
+ continue;
+
+ /*
+ * If any vma in the range got policy other than MPOL_BIND
+ * or MPOL_PREFERRED_MANY we return error. We don't reset
+ * the home node for vmas we already updated before.
+ */
+ if (new->mode != MPOL_BIND && new->mode != MPOL_PREFERRED_MANY) {
+ err = -EOPNOTSUPP;
+ break;
+ }
+
+ new->home_node = home_node;
+ err = mbind_range(mm, vmstart, vmend, new);
+ mpol_put(new);
+ if (err)
+ break;
+ }
+ mmap_write_unlock(mm);
+ return err;
+}
+
SYSCALL_DEFINE6(mbind, unsigned long, start, unsigned long, len,
unsigned long, mode, const unsigned long __user *, nmask,
unsigned long, maxnode, unsigned int, flags)
@@ -1801,6 +1873,11 @@ static int policy_node(gfp_t gfp, struct mempolicy *policy, int nd)
WARN_ON_ONCE(policy->mode == MPOL_BIND && (gfp & __GFP_THISNODE));
}
+ if ((policy->mode == MPOL_BIND ||
+ policy->mode == MPOL_PREFERRED_MANY) &&
+ policy->home_node != NUMA_NO_NODE)
+ return policy->home_node;
+
return nd;
}
@@ -2343,6 +2420,8 @@ bool __mpol_equal(struct mempolicy *a, struct mempolicy *b)
return false;
if (a->flags != b->flags)
return false;
+ if (a->home_node != b->home_node)
+ return false;
if (mpol_store_user_nodemask(a))
if (!nodes_equal(a->w.user_nodemask, b->w.user_nodemask))
return false;
--
2.31.1
^ permalink raw reply related [flat|nested] 5+ messages in thread* Re: [PATCH v6 2/3] mm/mempolicy: add set_mempolicy_home_node syscall
2021-12-02 12:38 ` [PATCH v6 2/3] mm/mempolicy: add set_mempolicy_home_node syscall Aneesh Kumar K.V
@ 2021-12-02 13:07 ` Michal Hocko
0 siblings, 0 replies; 5+ messages in thread
From: Michal Hocko @ 2021-12-02 13:07 UTC (permalink / raw)
To: Aneesh Kumar K.V
Cc: linux-mm, akpm, daniel.m.jordan, Ben Widawsky, Dave Hansen,
Feng Tang, Andrea Arcangeli, Mel Gorman, Mike Kravetz,
Randy Dunlap, Vlastimil Babka, Andi Kleen, Dan Williams,
Huang Ying, linux-api
On Thu 02-12-21 18:08:09, Aneesh Kumar K.V wrote:
> This syscall can be used to set a home node for the MPOL_BIND
> and MPOL_PREFERRED_MANY memory policy. Users should use this
> syscall after setting up a memory policy for the specified range
> as shown below.
>
> mbind(p, nr_pages * page_size, MPOL_BIND, new_nodes->maskp,
> new_nodes->size + 1, 0);
> sys_set_mempolicy_home_node((unsigned long)p, nr_pages * page_size,
> home_node, 0);
>
> The syscall allows specifying a home node/preferred node from which kernel
> will fulfill memory allocation requests first.
>
> For address range with MPOL_BIND memory policy, if nodemask specifies more
> than one node, page allocations will come from the node in the nodemask
> with sufficient free memory that is closest to the home node/preferred node.
>
> For MPOL_PREFERRED_MANY if the nodemask specifies more than one node,
> page allocation will come from the node in the nodemask with sufficient
> free memory that is closest to the home node/preferred node. If there is
> not enough memory in all the nodes specified in the nodemask, the allocation
> will be attempted from the closest numa node to the home node in the system.
>
> This helps applications to hint at a memory allocation preference node
> and fallback to _only_ a set of nodes if the memory is not available
> on the preferred node. Fallback allocation is attempted from the node which is
> nearest to the preferred node.
>
> This helps applications to have control on memory allocation numa nodes and
> avoids default fallback to slow memory NUMA nodes. For example a system with
> NUMA nodes 1,2 and 3 with DRAM memory and 10, 11 and 12 of slow memory
>
> new_nodes = numa_bitmask_alloc(nr_nodes);
>
> numa_bitmask_setbit(new_nodes, 1);
> numa_bitmask_setbit(new_nodes, 2);
> numa_bitmask_setbit(new_nodes, 3);
>
> p = mmap(NULL, nr_pages * page_size, protflag, mapflag, -1, 0);
> mbind(p, nr_pages * page_size, MPOL_BIND, new_nodes->maskp, new_nodes->size + 1, 0);
>
> sys_set_mempolicy_home_node(p, nr_pages * page_size, 2, 0);
>
> This will allocate from nodes closer to node 2 and will make sure the kernel will
> only allocate from nodes 1, 2, and 3. Memory will not be allocated from slow memory
> nodes 10, 11, and 12. This differs from default MPOL_BIND behavior in that with
> default MPOL_BIND the allocation will be attempted from node closer to the local node.
> One of the reasons to specify a home node is to allow allocations from cpu less
> NUMA node and its nearby NUMA nodes.
>
> With MPOL_PREFERRED_MANY on the other hand will first try to allocate from the
> closest node to node 2 from the node list 1, 2 and 3. If those nodes don't have
> enough memory, kernel will allocate from slow memory node 10, 11 and 12 which
> ever is closer to node 2.
>
> Cc: Ben Widawsky <ben.widawsky@intel.com>
> Cc: Dave Hansen <dave.hansen@linux.intel.com>
> Cc: Feng Tang <feng.tang@intel.com>
> Cc: Michal Hocko <mhocko@kernel.org>
> Cc: Andrea Arcangeli <aarcange@redhat.com>
> Cc: Mel Gorman <mgorman@techsingularity.net>
> Cc: Mike Kravetz <mike.kravetz@oracle.com>
> Cc: Randy Dunlap <rdunlap@infradead.org>
> Cc: Vlastimil Babka <vbabka@suse.cz>
> Cc: Andi Kleen <ak@linux.intel.com>
> Cc: Dan Williams <dan.j.williams@intel.com>
> Cc: Huang Ying <ying.huang@intel.com>
> Cc: linux-api@vger.kernel.org
> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
LGTM
Acked-by: Michal Hocko <mhocko@suse.com>
Thanks!
--
Michal Hocko
SUSE Labs
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v6 3/3] mm/mempolicy: wire up syscall set_mempolicy_home_node
2021-12-02 12:38 [PATCH v6 0/3] mm: add new syscall set_mempolicy_home_node Aneesh Kumar K.V
2021-12-02 12:38 ` [PATCH v6 1/3] mm/mempolicy: use policy_node helper with MPOL_PREFERRED_MANY Aneesh Kumar K.V
2021-12-02 12:38 ` [PATCH v6 2/3] mm/mempolicy: add set_mempolicy_home_node syscall Aneesh Kumar K.V
@ 2021-12-02 12:38 ` Aneesh Kumar K.V
2 siblings, 0 replies; 5+ messages in thread
From: Aneesh Kumar K.V @ 2021-12-02 12:38 UTC (permalink / raw)
To: linux-mm
Cc: akpm, daniel.m.jordan, Aneesh Kumar K.V, Ben Widawsky,
Dave Hansen, Feng Tang, Michal Hocko, Andrea Arcangeli,
Mel Gorman, Mike Kravetz, Randy Dunlap, Vlastimil Babka,
Andi Kleen, Dan Williams, Huang Ying, linux-api,
kernel test robot
Cc: Ben Widawsky <ben.widawsky@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: linux-api@vger.kernel.org
Fix build failure
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
arch/alpha/kernel/syscalls/syscall.tbl | 1 +
arch/arm/tools/syscall.tbl | 1 +
arch/arm64/include/asm/unistd.h | 2 +-
arch/arm64/include/asm/unistd32.h | 2 ++
arch/ia64/kernel/syscalls/syscall.tbl | 1 +
arch/m68k/kernel/syscalls/syscall.tbl | 1 +
arch/microblaze/kernel/syscalls/syscall.tbl | 1 +
arch/mips/kernel/syscalls/syscall_n32.tbl | 1 +
arch/mips/kernel/syscalls/syscall_n64.tbl | 1 +
arch/mips/kernel/syscalls/syscall_o32.tbl | 1 +
arch/parisc/kernel/syscalls/syscall.tbl | 1 +
arch/powerpc/kernel/syscalls/syscall.tbl | 1 +
arch/s390/kernel/syscalls/syscall.tbl | 1 +
arch/sh/kernel/syscalls/syscall.tbl | 1 +
arch/sparc/kernel/syscalls/syscall.tbl | 1 +
arch/x86/entry/syscalls/syscall_32.tbl | 1 +
arch/x86/entry/syscalls/syscall_64.tbl | 1 +
arch/xtensa/kernel/syscalls/syscall.tbl | 1 +
include/linux/syscalls.h | 3 +++
include/uapi/asm-generic/unistd.h | 5 ++++-
kernel/sys_ni.c | 1 +
21 files changed, 27 insertions(+), 2 deletions(-)
diff --git a/arch/alpha/kernel/syscalls/syscall.tbl b/arch/alpha/kernel/syscalls/syscall.tbl
index ca5a32228cd6..3515bc4f16a4 100644
--- a/arch/alpha/kernel/syscalls/syscall.tbl
+++ b/arch/alpha/kernel/syscalls/syscall.tbl
@@ -489,3 +489,4 @@
# 557 reserved for memfd_secret
558 common process_mrelease sys_process_mrelease
559 common futex_waitv sys_futex_waitv
+560 common set_mempolicy_home_node sys_ni_syscall
diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl
index 543100151f2b..ac964612d8b0 100644
--- a/arch/arm/tools/syscall.tbl
+++ b/arch/arm/tools/syscall.tbl
@@ -463,3 +463,4 @@
# 447 reserved for memfd_secret
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
+450 common set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/arm64/include/asm/unistd.h b/arch/arm64/include/asm/unistd.h
index 6bdb5f5db438..4e65da3445c7 100644
--- a/arch/arm64/include/asm/unistd.h
+++ b/arch/arm64/include/asm/unistd.h
@@ -38,7 +38,7 @@
#define __ARM_NR_compat_set_tls (__ARM_NR_COMPAT_BASE + 5)
#define __ARM_NR_COMPAT_END (__ARM_NR_COMPAT_BASE + 0x800)
-#define __NR_compat_syscalls 450
+#define __NR_compat_syscalls 451
#endif
#define __ARCH_WANT_SYS_CLONE
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index 41ea1195e44b..604a2053d006 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -905,6 +905,8 @@ __SYSCALL(__NR_landlock_restrict_self, sys_landlock_restrict_self)
__SYSCALL(__NR_process_mrelease, sys_process_mrelease)
#define __NR_futex_waitv 449
__SYSCALL(__NR_futex_waitv, sys_futex_waitv)
+#define __NR_set_mempolicy_home_node 450
+__SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node)
/*
* Please add new compat syscalls above this comment and update
diff --git a/arch/ia64/kernel/syscalls/syscall.tbl b/arch/ia64/kernel/syscalls/syscall.tbl
index 707ae121f6d3..78b1d03e86e1 100644
--- a/arch/ia64/kernel/syscalls/syscall.tbl
+++ b/arch/ia64/kernel/syscalls/syscall.tbl
@@ -370,3 +370,4 @@
# 447 reserved for memfd_secret
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
+450 common set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/m68k/kernel/syscalls/syscall.tbl b/arch/m68k/kernel/syscalls/syscall.tbl
index 45bc32a41b90..b1f3940bc298 100644
--- a/arch/m68k/kernel/syscalls/syscall.tbl
+++ b/arch/m68k/kernel/syscalls/syscall.tbl
@@ -449,3 +449,4 @@
# 447 reserved for memfd_secret
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
+450 common set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/microblaze/kernel/syscalls/syscall.tbl b/arch/microblaze/kernel/syscalls/syscall.tbl
index 2204bde3ce4a..820145e47350 100644
--- a/arch/microblaze/kernel/syscalls/syscall.tbl
+++ b/arch/microblaze/kernel/syscalls/syscall.tbl
@@ -455,3 +455,4 @@
# 447 reserved for memfd_secret
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
+450 common set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/mips/kernel/syscalls/syscall_n32.tbl b/arch/mips/kernel/syscalls/syscall_n32.tbl
index 72d02d363f36..253ff994ed2e 100644
--- a/arch/mips/kernel/syscalls/syscall_n32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n32.tbl
@@ -388,3 +388,4 @@
# 447 reserved for memfd_secret
448 n32 process_mrelease sys_process_mrelease
449 n32 futex_waitv sys_futex_waitv
+450 n32 set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/mips/kernel/syscalls/syscall_n64.tbl b/arch/mips/kernel/syscalls/syscall_n64.tbl
index e2c481fcede6..3f1886ad9d80 100644
--- a/arch/mips/kernel/syscalls/syscall_n64.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n64.tbl
@@ -364,3 +364,4 @@
# 447 reserved for memfd_secret
448 n64 process_mrelease sys_process_mrelease
449 n64 futex_waitv sys_futex_waitv
+450 common set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/mips/kernel/syscalls/syscall_o32.tbl b/arch/mips/kernel/syscalls/syscall_o32.tbl
index 3714c97b2643..8f243e35a7b2 100644
--- a/arch/mips/kernel/syscalls/syscall_o32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_o32.tbl
@@ -437,3 +437,4 @@
# 447 reserved for memfd_secret
448 o32 process_mrelease sys_process_mrelease
449 o32 futex_waitv sys_futex_waitv
+450 o32 set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/parisc/kernel/syscalls/syscall.tbl b/arch/parisc/kernel/syscalls/syscall.tbl
index 358c00000755..68b46fe2f17c 100644
--- a/arch/parisc/kernel/syscalls/syscall.tbl
+++ b/arch/parisc/kernel/syscalls/syscall.tbl
@@ -447,3 +447,4 @@
# 447 reserved for memfd_secret
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
+450 common set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl
index 15109af9d075..2600b4237292 100644
--- a/arch/powerpc/kernel/syscalls/syscall.tbl
+++ b/arch/powerpc/kernel/syscalls/syscall.tbl
@@ -529,3 +529,4 @@
# 447 reserved for memfd_secret
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
+450 nospu set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/s390/kernel/syscalls/syscall.tbl b/arch/s390/kernel/syscalls/syscall.tbl
index ed9c5c2eafad..799147658dee 100644
--- a/arch/s390/kernel/syscalls/syscall.tbl
+++ b/arch/s390/kernel/syscalls/syscall.tbl
@@ -452,3 +452,4 @@
# 447 reserved for memfd_secret
448 common process_mrelease sys_process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv sys_futex_waitv
+450 common set_mempolicy_home_node sys_set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/sh/kernel/syscalls/syscall.tbl b/arch/sh/kernel/syscalls/syscall.tbl
index d9539d28bdaa..2de85c977f54 100644
--- a/arch/sh/kernel/syscalls/syscall.tbl
+++ b/arch/sh/kernel/syscalls/syscall.tbl
@@ -452,3 +452,4 @@
# 447 reserved for memfd_secret
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
+450 common set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/sparc/kernel/syscalls/syscall.tbl b/arch/sparc/kernel/syscalls/syscall.tbl
index 46adabcb1720..4398cc6fb68d 100644
--- a/arch/sparc/kernel/syscalls/syscall.tbl
+++ b/arch/sparc/kernel/syscalls/syscall.tbl
@@ -495,3 +495,4 @@
# 447 reserved for memfd_secret
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
+450 common set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index 7e25543693de..320480a8db4f 100644
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -454,3 +454,4 @@
447 i386 memfd_secret sys_memfd_secret
448 i386 process_mrelease sys_process_mrelease
449 i386 futex_waitv sys_futex_waitv
+450 i386 set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index fe8f8dd157b4..c84d12608cd2 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -371,6 +371,7 @@
447 common memfd_secret sys_memfd_secret
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
+450 common set_mempolicy_home_node sys_set_mempolicy_home_node
#
# Due to a historical design error, certain syscalls are numbered differently
diff --git a/arch/xtensa/kernel/syscalls/syscall.tbl b/arch/xtensa/kernel/syscalls/syscall.tbl
index 3e3e1a506bed..52c94ab5c205 100644
--- a/arch/xtensa/kernel/syscalls/syscall.tbl
+++ b/arch/xtensa/kernel/syscalls/syscall.tbl
@@ -420,3 +420,4 @@
# 447 reserved for memfd_secret
448 common process_mrelease sys_process_mrelease
449 common futex_waitv sys_futex_waitv
+450 common set_mempolicy_home_node sys_set_mempolicy_home_node
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 528a478dbda8..819c0cb00b6d 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -1057,6 +1057,9 @@ asmlinkage long sys_landlock_add_rule(int ruleset_fd, enum landlock_rule_type ru
const void __user *rule_attr, __u32 flags);
asmlinkage long sys_landlock_restrict_self(int ruleset_fd, __u32 flags);
asmlinkage long sys_memfd_secret(unsigned int flags);
+asmlinkage long sys_set_mempolicy_home_node(unsigned long start, unsigned long len,
+ unsigned long home_node,
+ unsigned long flags);
/*
* Architecture-specific system calls
diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
index 4557a8b6086f..1c48b0ae3ba3 100644
--- a/include/uapi/asm-generic/unistd.h
+++ b/include/uapi/asm-generic/unistd.h
@@ -883,8 +883,11 @@ __SYSCALL(__NR_process_mrelease, sys_process_mrelease)
#define __NR_futex_waitv 449
__SYSCALL(__NR_futex_waitv, sys_futex_waitv)
+#define __NR_set_mempolicy_home_node 450
+__SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node)
+
#undef __NR_syscalls
-#define __NR_syscalls 450
+#define __NR_syscalls 451
/*
* 32 bit systems traditionally used different
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index d1944258cfc0..a492f159624f 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -297,6 +297,7 @@ COND_SYSCALL(get_mempolicy);
COND_SYSCALL(set_mempolicy);
COND_SYSCALL(migrate_pages);
COND_SYSCALL(move_pages);
+COND_SYSCALL(set_mempolicy_home_node);
COND_SYSCALL(perf_event_open);
COND_SYSCALL(accept4);
--
2.31.1
^ permalink raw reply related [flat|nested] 5+ messages in thread