From: Hugh Dickins <hughd@google.com>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: [PATCH 2/14] mm: move vmtruncate_range to truncate.c
Date: Mon, 30 May 2011 17:36:57 -0700 (PDT) [thread overview]
Message-ID: <alpine.LSU.2.00.1105301735520.5482@sister.anvils> (raw)
In-Reply-To: <alpine.LSU.2.00.1105301726180.5482@sister.anvils>
You would expect to find vmtruncate_range() next to vmtruncate()
in mm/truncate.c: move it there.
Signed-off-by: Hugh Dickins <hughd@google.co>
---
mm/memory.c | 24 ------------------------
mm/truncate.c | 24 ++++++++++++++++++++++++
2 files changed, 24 insertions(+), 24 deletions(-)
--- linux.orig/mm/memory.c 2011-05-30 13:56:10.416798124 -0700
+++ linux/mm/memory.c 2011-05-30 14:09:52.908876549 -0700
@@ -2796,30 +2796,6 @@ void unmap_mapping_range(struct address_
}
EXPORT_SYMBOL(unmap_mapping_range);
-int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end)
-{
- struct address_space *mapping = inode->i_mapping;
-
- /*
- * If the underlying filesystem is not going to provide
- * a way to truncate a range of blocks (punch a hole) -
- * we should return failure right now.
- */
- if (!inode->i_op->truncate_range)
- return -ENOSYS;
-
- mutex_lock(&inode->i_mutex);
- down_write(&inode->i_alloc_sem);
- unmap_mapping_range(mapping, offset, (end - offset), 1);
- truncate_inode_pages_range(mapping, offset, end);
- unmap_mapping_range(mapping, offset, (end - offset), 1);
- inode->i_op->truncate_range(inode, offset, end);
- up_write(&inode->i_alloc_sem);
- mutex_unlock(&inode->i_mutex);
-
- return 0;
-}
-
/*
* We enter with non-exclusive mmap_sem (to exclude vma changes,
* but allow concurrent faults), and pte mapped but not yet locked.
--- linux.orig/mm/truncate.c 2011-05-30 14:08:46.612547848 -0700
+++ linux/mm/truncate.c 2011-05-30 14:09:52.912876640 -0700
@@ -605,3 +605,27 @@ int vmtruncate(struct inode *inode, loff
return 0;
}
EXPORT_SYMBOL(vmtruncate);
+
+int vmtruncate_range(struct inode *inode, loff_t offset, loff_t end)
+{
+ struct address_space *mapping = inode->i_mapping;
+
+ /*
+ * If the underlying filesystem is not going to provide
+ * a way to truncate a range of blocks (punch a hole) -
+ * we should return failure right now.
+ */
+ if (!inode->i_op->truncate_range)
+ return -ENOSYS;
+
+ mutex_lock(&inode->i_mutex);
+ down_write(&inode->i_alloc_sem);
+ unmap_mapping_range(mapping, offset, (end - offset), 1);
+ truncate_inode_pages_range(mapping, offset, end);
+ unmap_mapping_range(mapping, offset, (end - offset), 1);
+ inode->i_op->truncate_range(inode, offset, end);
+ up_write(&inode->i_alloc_sem);
+ mutex_unlock(&inode->i_mutex);
+
+ return 0;
+}
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2011-05-31 0:37 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-31 0:33 [PATCH 0/14] mm: tmpfs and trunc changes, affecting drm Hugh Dickins
2011-05-31 0:35 ` [PATCH 1/14] mm: invalidate_mapping_pages flush cleancache Hugh Dickins
2011-05-31 15:49 ` Dan Magenheimer
2011-05-31 17:05 ` Hugh Dickins
2011-05-31 21:08 ` Chris Mason
2011-05-31 22:01 ` Hugh Dickins
2011-05-31 0:36 ` Hugh Dickins [this message]
2011-06-01 0:36 ` [PATCH 2/14] mm: move vmtruncate_range to truncate.c Christoph Hellwig
2011-05-31 0:39 ` [PATCH 3/14] tmpfs: take control of its truncate_range Hugh Dickins
2011-06-01 0:39 ` Christoph Hellwig
2011-06-01 16:58 ` Hugh Dickins
2011-06-03 5:16 ` Christoph Hellwig
2011-06-06 5:37 ` Hugh Dickins
2011-05-31 0:40 ` [PATCH 4/14] tmpfs: add shmem_read_mapping_page_gfp Hugh Dickins
2011-06-01 0:42 ` Christoph Hellwig
2011-06-01 17:02 ` Hugh Dickins
2011-05-31 0:42 ` [PATCH 5/14] drm/ttm: use shmem_read_mapping_page Hugh Dickins
2011-05-31 0:43 ` [PATCH 6/14] drm/i915: " Hugh Dickins
2011-05-31 0:45 ` [PATCH 7/14] drm/i915: adjust to new truncate_range Hugh Dickins
2011-06-01 0:43 ` Christoph Hellwig
2011-06-01 17:04 ` Hugh Dickins
2011-05-31 0:46 ` [PATCH 8/14] drm/i915: more struct_mutex locking Hugh Dickins
2011-05-31 0:48 ` [PATCH 9/14] mm: cleanup descriptions of filler arg Hugh Dickins
2011-05-31 0:49 ` [PATCH 10/14] mm: truncate functions are in truncate.c Hugh Dickins
2011-05-31 0:51 ` [PATCH 11/14] mm: tidy vmtruncate_range and related functions Hugh Dickins
2011-05-31 0:52 ` [PATCH 12/14] mm: consistent truncate and invalidate loops Hugh Dickins
2011-05-31 0:54 ` [PATCH 13/14] mm: pincer in truncate_inode_pages_range Hugh Dickins
2011-05-31 0:55 ` [PATCH 14/14] tmpfs: no need to use i_lock Hugh Dickins
2011-05-31 16:08 ` Tim Chen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.LSU.2.00.1105301735520.5482@sister.anvils \
--to=hughd@google.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox