From: Meelis Roos <mroos@linux.ee>
To: Pekka Enberg <penberg@kernel.org>,
Christoph Lameter <cl@linux-foundation.org>,
Matt Mackall <mpm@selenic.com>
Cc: Linux Kernel list <linux-kernel@vger.kernel.org>, linux-mm@kvack.org
Subject: Slab BUG with DEBUG_* options
Date: Sat, 30 Nov 2013 13:42:23 +0200 (EET) [thread overview]
Message-ID: <alpine.SOC.1.00.1311300125490.6363@math.ut.ee> (raw)
I am debugging a reboot problem on Sun Ultra 5 (sparc64) with 512M RAM
and turned on DEBUG_PAGEALLOC DEBUG_SLAB and DEBUG_SLAB_LEAK (and most
other debug options) and got the following BUG and hang on startup. This
happened originally with 3.11-rc2-00058 where my bisection of
another problem lead, but I retested 3.12 to have the same BUG in the
same place.
kernel BUG at mm/slab.c:2391!
\|/ ____ \|/
"@'/ .. \`@"
/_| \__/ |_\
\__U_/
swapper(0): Kernel bad sw trap 5 [#1]
CPU: 0 PID: 0 Comm: swapper Not tainted 3.11.0-rc2-00058-g20bafb3-dirty #127
task: 00000000008ac468 ti: 000000000089c000 task.ti: 000000000089c000
TSTATE: 0000004480e01606 TPC: 00000000004f57d4 TNPC: 00000000004f57d8 Y: 00000000 Not tainted
TPC: <__kmem_cache_create+0x374/0x480>
g0: 00000000000000f8 g1: 00000000008bb400 g2: 000000000002780b g3: 00000000008b5120
g4: 00000000008ac468 g5: 0000000000000000 g6: 000000000089c000 g7: 0000000000000000
o0: 0000000000845f08 o1: 0000000000000957 o2: ffffffffffffffe0 o3: 0000000000000000
o4: 0000000000002004 o5: 0000000000000000 sp: 000000000089f301 ret_pc: 00000000004f57cc
RPC: <__kmem_cache_create+0x36c/0x480>
l0: fffff8001e812040 l1: fffff8001e819f80 l2: fffff8001e819fb8 l3: fffff8001e819fd8
l4: 0000000000000001 l5: fffff8001e819fc8 l6: 0000000000845f08 l7: fffff8001e8300a0
i0: fffff8001e831fa0 i1: 0000000080002800 i2: 0000000080000000 i3: 0000000000000034
i4: 0000000000000000 i5: 0000000000002000 i6: 000000000089f3b1 i7: 0000000000907464
I7: <create_boot_cache+0x4c/0x84>
Call Trace:
[0000000000907464] create_boot_cache+0x4c/0x84
[00000000009074d0] create_kmalloc_cache+0x34/0x60
[0000000000907540] create_kmalloc_caches+0x44/0x168
[0000000000908dfc] kmem_cache_init+0x1d0/0x1e0
[00000000008fc658] start_kernel+0x18c/0x370
[0000000000761df4] tlb_fixup_done+0x88/0x94
[0000000000000000] (null)
Disabling lock debugging due to kernel taint
Caller[0000000000907464]: create_boot_cache+0x4c/0x84
Caller[00000000009074d0]: create_kmalloc_cache+0x34/0x60
Caller[0000000000907540]: create_kmalloc_caches+0x44/0x168
Caller[0000000000908dfc]: kmem_cache_init+0x1d0/0x1e0
Caller[00000000008fc658]: start_kernel+0x18c/0x370
Caller[0000000000761df4]: tlb_fixup_done+0x88/0x94
Caller[0000000000000000]: (null)
Instruction DUMP: 92102957 7ffccb35 90122308 <91d02005> 90100018 4009b371 920f20d0 ba922000 02480006
Kernel panic - not syncing: Attempted to kill the idle task!
Press Stop-A (L1-A) to return to the boot prom
The line shows that __kmem_cache_create gets a NULL from kmalloc_slab().
I instrumented the code and found the following:
__kmem_cache_create: starting, size=248, flags=8192
__kmem_cache_create: now flags=76800
__kmem_cache_create: aligned size to 248 because of redzoning
__kmem_cache_create: pagealloc debug, setting size to 8192
__kmem_cache_create: aligned size to 8192
__kmem_cache_create: num=1, slab_size=64
__kmem_cache_create: starting, size=96, flags=8192
__kmem_cache_create: now flags=76800
__kmem_cache_create: aligned size to 96 because of redzoning
__kmem_cache_create: pagealloc debug, setting size to 8192
__kmem_cache_create: aligned size to 8192
__kmem_cache_create: num=1, slab_size=64
__kmem_cache_create: starting, size=192, flags=8192
__kmem_cache_create: now flags=76800
__kmem_cache_create: aligned size to 192 because of redzoning
__kmem_cache_create: pagealloc debug, setting size to 8192
__kmem_cache_create: aligned size to 8192
__kmem_cache_create: num=1, slab_size=64
__kmem_cache_create: starting, size=32, flags=8192
__kmem_cache_create: now flags=76800
__kmem_cache_create: aligned size to 32 because of redzoning
__kmem_cache_create: aligned size to 32
__kmem_cache_create: num=226, slab_size=960
__kmem_cache_create: starting, size=64, flags=8192
__kmem_cache_create: now flags=76800
__kmem_cache_create: aligned size to 64 because of redzoning
__kmem_cache_create: pagealloc debug, setting size to 8192
__kmem_cache_create: turning on CFLGS_OFF_SLAB, size=8192
__kmem_cache_create: aligned size to 8192
__kmem_cache_create: num=1, slab_size=64
__kmem_cache_create: CFLGS_OFF_SLAB, size=8192, slab_size=52
__kmem_cache_create: CFLGS_OFF_SLAB, allocating slab 52
With slab size 64, it turns on CFLGS_OFF_SLAB and off slab allocation
with this size fails. I do not know slab internals so I can not tell if
this just happens because of the debug paths, or is it a real problem
without the debug options too.
--
Meelis Roos (mroos@linux.ee)
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next reply other threads:[~2013-11-30 11:42 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-30 11:42 Meelis Roos [this message]
2013-11-30 22:31 ` Slab BUG with DEBUG_* options David Rientjes
2013-12-02 19:02 ` Christoph Lameter
2013-12-03 8:46 ` Meelis Roos
2013-12-03 9:17 ` Meelis Roos
2013-12-03 11:53 ` Pekka Enberg
2013-12-03 12:25 ` Joonsoo Kim
2013-12-03 12:44 ` Pekka Enberg
2013-12-03 15:46 ` Christoph Lameter
2013-12-03 20:33 ` Meelis Roos
2013-12-03 20:59 ` Christoph Lameter
[not found] ` <alpine.DEB.2.02.1312030930450.4115@gentwo.org>
2013-12-03 20:25 ` Christoph Lameter
2013-12-03 21:18 ` Meelis Roos
2013-12-03 21:58 ` Christoph Lameter
2013-12-08 15:00 ` Meelis Roos
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=alpine.SOC.1.00.1311300125490.6363@math.ut.ee \
--to=mroos@linux.ee \
--cc=cl@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mpm@selenic.com \
--cc=penberg@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).